[PATCH 2/6] ARM: apx4devkit: add display support
Lauri Hintsala
lauri.hintsala at bluegiga.com
Tue Jul 10 03:08:08 EDT 2012
Add HannStar display and device tree configuration.
Signed-off-by: Lauri Hintsala <lauri.hintsala at bluegiga.com>
---
arch/arm/boot/dts/apx4devkit.dts | 21 +++++++++++++++++++++
arch/arm/mach-mxs/mach-mxs.c | 24 ++++++++++++++++++++++++
2 files changed, 45 insertions(+)
diff --git a/arch/arm/boot/dts/apx4devkit.dts b/arch/arm/boot/dts/apx4devkit.dts
index ecad288..6217297 100644
--- a/arch/arm/boot/dts/apx4devkit.dts
+++ b/arch/arm/boot/dts/apx4devkit.dts
@@ -35,11 +35,32 @@
reg = <0>;
fsl,pinmux-ids = <
0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
+ 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
+
+ lcdif_pins_apx4: lcdif-apx4 at 0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+ 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+ 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+ 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+
+ lcdif at 80030000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdif_24bit_pins_a
+ &lcdif_pins_apx4>;
+ status = "okay";
};
};
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index b3239e2..4ea78e6 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -80,6 +80,25 @@ static struct fb_videomode m28evk_video_modes[] = {
},
};
+static struct fb_videomode apx4devkit_video_modes[] = {
+ {
+ .name = "HannStar PJ70112A",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 33333, /* picosecond (30.00 MHz) */
+ .left_margin = 88,
+ .right_margin = 40,
+ .upper_margin = 32,
+ .lower_margin = 13,
+ .hsync_len = 48,
+ .vsync_len = 3,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
+ FB_SYNC_DATA_ENABLE_HIGH_ACT |
+ FB_SYNC_DOTCLK_FAILING_ACT,
+ },
+};
+
static struct mxsfb_platform_data mxsfb_pdata __initdata;
static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
@@ -250,6 +269,11 @@ static void __init apx4devkit_init(void)
if (IS_BUILTIN(CONFIG_PHYLIB))
phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
apx4devkit_phy_fixup);
+
+ mxsfb_pdata.mode_list = apx4devkit_video_modes;
+ mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes);
+ mxsfb_pdata.default_bpp = 32;
+ mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
}
static void __init mxs_machine_init(void)
--
1.7.9.5
More information about the linux-arm-kernel
mailing list