[PATCH] [v3] i.MX27: Fix emma-prp clocks in mx2_camera.c

Sascha Hauer s.hauer at pengutronix.de
Mon Jul 9 04:07:03 EDT 2012


On Mon, Jul 09, 2012 at 09:46:03AM +0200, javier Martin wrote:
> On 9 July 2012 09:43, Sascha Hauer <s.hauer at pengutronix.de> wrote:
> > On Mon, Jul 09, 2012 at 09:37:25AM +0200, javier Martin wrote:
> >> On 9 July 2012 09:28, Sascha Hauer <s.hauer at pengutronix.de> wrote:
> >> > On Fri, Jul 06, 2012 at 12:56:02PM +0200, Javier Martin wrote:
> >> >> This driver wasn't converted to the new clock changes
> >> >> (clk_prepare_enable/clk_disable_unprepare). Also naming
> >> >> of emma-prp related clocks for the i.MX27 was not correct.
> >> >> ---
> >> >> Enable clocks only for i.MX27.
> >> >>
> >> >
> >> > Indeed,
> >> >
> >> >>
> >> >> -     pcdev->clk_csi = clk_get(&pdev->dev, NULL);
> >> >> -     if (IS_ERR(pcdev->clk_csi)) {
> >> >> -             dev_err(&pdev->dev, "Could not get csi clock\n");
> >> >> -             err = PTR_ERR(pcdev->clk_csi);
> >> >> -             goto exit_kfree;
> >> >> +     if (cpu_is_mx27()) {
> >> >> +             pcdev->clk_csi = devm_clk_get(&pdev->dev, "ahb");
> >> >> +             if (IS_ERR(pcdev->clk_csi)) {
> >> >> +                     dev_err(&pdev->dev, "Could not get csi clock\n");
> >> >> +                     err = PTR_ERR(pcdev->clk_csi);
> >> >> +                     goto exit_kfree;
> >> >> +             }
> >> >
> >> > but why? Now the i.MX25 won't get a clock anymore.
> >>
> >> What are the clocks needed by i.MX25? csi only?
> >>
> >> By the way, is anybody using this driver with i.MX25?
> >
> > It seems Baruch (added to Cc) has used it on an i.MX25.
> 
> Baruch,
> could you tell us what are the clocks needed by i.MX25?

I just had a look and the i.MX25 it needs three clocks: ipg, ahb and
peripheral clock. So this is broken anyway and should probably be fixed
seperately, that is:

- provide dummy clocks for the csi clocks on i.MX27
- clk_get ipg, ahb and peripheral clocks on all SoCs
- clk_get emma clocks on i.MX27 only

As said, this is a separate topic, so your original patch should be fine
for now.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the linux-arm-kernel mailing list