[PATCH 1/1] ARM: add PROC_DEVICETREE support in Kconfig
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Fri Jul 6 07:28:34 EDT 2012
On 18:38 Fri 06 Jul , jgq516 at gmail.com wrote:
> From: Xiao Jiang <jgq516 at gmail.com>
>
> Since more and more arm chips support device tree, it'd be better add PROC_DEVICETREE
> in arch/arm/Kconfig to avoid duplicate code.
>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
Best Regards,
J.
> Signed-off-by: Xiao Jiang <jgq516 at gmail.com>
> ---
> arch/arm/Kconfig | 1 +
> arch/arm/configs/at91_dt_defconfig | 1 -
> arch/arm/configs/tegra_defconfig | 1 -
> arch/arm/plat-omap/Kconfig | 1 -
> 4 files changed, 1 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index a91009c..f68896e 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1864,6 +1864,7 @@ config USE_OF
> select OF
> select OF_EARLY_FLATTREE
> select IRQ_DOMAIN
> + select PROC_DEVICETREE if PROC_FS
> help
> Include support for flattened device tree machine descriptions.
>
> diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
> index 67bc571..b856cb6 100644
> --- a/arch/arm/configs/at91_dt_defconfig
> +++ b/arch/arm/configs/at91_dt_defconfig
> @@ -64,7 +64,6 @@ CONFIG_MTD_NAND=y
> CONFIG_MTD_NAND_ATMEL=y
> CONFIG_MTD_UBI=y
> CONFIG_MTD_UBI_GLUEBI=y
> -CONFIG_PROC_DEVICETREE=y
> CONFIG_BLK_DEV_LOOP=y
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=4
> diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
> index 1198dd6..43e7b65 100644
> --- a/arch/arm/configs/tegra_defconfig
> +++ b/arch/arm/configs/tegra_defconfig
> @@ -72,7 +72,6 @@ CONFIG_IPV6_TUNNEL=y
> CONFIG_IPV6_MULTIPLE_TABLES=y
> # CONFIG_WIRELESS is not set
> # CONFIG_FIRMWARE_IN_KERNEL is not set
> -CONFIG_PROC_DEVICETREE=y
> CONFIG_BLK_DEV_LOOP=y
> CONFIG_AD525X_DPOT=y
> CONFIG_AD525X_DPOT_I2C=y
> diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
> index ad95c7a..4e2cb17 100644
> --- a/arch/arm/plat-omap/Kconfig
> +++ b/arch/arm/plat-omap/Kconfig
> @@ -27,7 +27,6 @@ config ARCH_OMAP2PLUS
> select GENERIC_IRQ_CHIP
> select OMAP_DM_TIMER
> select USE_OF
> - select PROC_DEVICETREE if PROC_FS
> help
> "Systems based on OMAP2, OMAP3 or OMAP4"
>
> --
> 1.7.3
>
More information about the linux-arm-kernel
mailing list