[PATCH 4/5] ARM: OMAP3EVM: cosmetic fixes for parent clk set
Tony Lindgren
tony at atomide.com
Fri Jul 6 04:38:23 EDT 2012
* Zumeng Chen <zumeng.chen at windriver.com> [120620 02:19]:
> Since it's no more sense to set parent for dummy clock,
> so we can just ignore it to mute failed message.
This is something Paul should look at.
Regards,
Tony
> Signed-off-by: Jon Hunter <jon-hunter at ti.com>
> Signed-off-by: Zumeng Chen <zumeng.chen at gmail.com>
> ---
> arch/arm/plat-omap/clock.c | 4 ++++
> drivers/mfd/omap-usb-host.c | 2 +-
> 2 files changed, 5 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
> index 62ec5c4..c7e26e4 100644
> --- a/arch/arm/plat-omap/clock.c
> +++ b/arch/arm/plat-omap/clock.c
> @@ -149,6 +149,10 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
> if (!arch_clock || !arch_clock->clk_set_parent)
> return ret;
>
> + /* If the clock is a dummy clock just return */
> + if (clk == &dummy_ck)
> + return 0;
> +
> spin_lock_irqsave(&clockfw_lock, flags);
> if (clk->usecount == 0) {
> ret = arch_clock->clk_set_parent(clk, parent);
> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
> index 7e96bb2..c9d27c4 100644
> --- a/drivers/mfd/omap-usb-host.c
> +++ b/drivers/mfd/omap-usb-host.c
> @@ -699,7 +699,7 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
> }
>
> if (is_ehci_phy_mode(pdata->port_mode[0])) {
> - /* for OMAP3 , the clk set paretn fails */
> + /* for OMAP3 , the clk set parent fails */
> ret = clk_set_parent(omap->utmi_p1_fck,
> omap->xclk60mhsp1_ck);
> if (ret != 0)
> --
> 1.7.5.4
>
More information about the linux-arm-kernel
mailing list