[PATCH 10/10] ARM: mx28: Add SPI pinmux into imx28.dtsi
Marek Vasut
marex at denx.de
Fri Jul 6 02:17:29 EDT 2012
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Chris Ball <cjb at laptop.org>
Cc: Detlev Zundel <dzu at denx.de>
CC: Dong Aisheng <b29396 at freescale.com>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
Cc: Grant Likely <grant.likely at secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel at lists.infradead.org>
Cc: Rob Herring <rob.herring at calxeda.com>
CC: Shawn Guo <shawn.guo at linaro.org>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Wolfgang Denk <wd at denx.de>
---
arch/arm/boot/dts/imx28.dtsi | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 01625e2..da5ce86 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -339,6 +339,45 @@
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
+
+ spi0_pins_a: spi0 at 0 {
+ reg = <0>;
+ fsl,pinmux-ids =
+ <0x2000 0x2010 0x2020 0x2030
+ 0x2040 0x2050 0x2060 0x2070
+ 0x2080 0x2090 0x20a0>;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ spi1_pins_a: spi1 at 0 {
+ reg = <0>;
+ fsl,pinmux-ids =
+ <0x20c0 0x20d0 0x20e0 0x20f0>;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ spi2_pins_a: spi2 at 0 {
+ reg = <0>;
+ fsl,pinmux-ids =
+ <0x2100 0x2110 0x2120
+ 0x2130 0x2140 0x2150>;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ spi3_pins_a: spi3 at 0 {
+ reg = <0>;
+ fsl,pinmux-ids =
+ <0x2180 0x2190 0x21a0 0x21b0>;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
};
digctl at 8001c000 {
--
1.7.10
More information about the linux-arm-kernel
mailing list