[PATCH] i2c i.MX: Fix divider table

[Sascha Hauer]

On Thu, Jul 05, 2012 at 10:52:39PM +0800, Richard Zhao wrote:
> On Thu, Jul 05, 2012 at 03:10:26PM +0200, Sascha Hauer wrote:
> > Measurements on i.MX1 and i.MX53 have shown that the divider values
> > in the datasheets are wrong. the values from first, third and fourth
> > column were all measured to be 8 higher than in the datasheet. It
> > should be safe to assume that the SoCs between i.MX1 and i.MX53 behave
> > the same as the i2c unit is unchanged since the i.MX1.
> We may need to check with IC guys? Or you've done?

I don't have contact to the IC guys. Could you do this? I'd be
interested in the results.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |