[PATCH v1 08/14] ARM: OMAP5: Add the WakeupGen IP updates
Santosh Shilimkar
santosh.shilimkar at ti.com
Thu Jul 5 08:08:50 EDT 2012
OMAP4 and OMAP5 share same WakeupGen IP with below few udpates on OMAP5.
- Additional 32 interrupt support is added w.r.t OMAP4 design.
- The AUX CORE boot registers are now made accessible from non-secure SW.
- SAR offset are changed and PTMSYNC* registers are removed from SAR.
Patch updates the WakeupGen code accordingly.
Signed-off-by: R Sricharan <r.sricharan at ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
---
arch/arm/mach-omap2/include/mach/omap-wakeupgen.h | 7 ++
arch/arm/mach-omap2/omap-hotplug.c | 24 ++++-
arch/arm/mach-omap2/omap-smp.c | 19 +++-
arch/arm/mach-omap2/omap-wakeupgen.c | 114 ++++++++++++++++-----
arch/arm/mach-omap2/omap4-sar-layout.h | 12 ++-
5 files changed, 143 insertions(+), 33 deletions(-)
diff --git a/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h b/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h
index 548de90b..b0fd16f 100644
--- a/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h
+++ b/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h
@@ -11,15 +11,20 @@
#ifndef OMAP_ARCH_WAKEUPGEN_H
#define OMAP_ARCH_WAKEUPGEN_H
+/* OMAP4 and OMAP5 has same base address */
+#define OMAP_WKUPGEN_BASE 0x48281000
+
#define OMAP_WKG_CONTROL_0 0x00
#define OMAP_WKG_ENB_A_0 0x10
#define OMAP_WKG_ENB_B_0 0x14
#define OMAP_WKG_ENB_C_0 0x18
#define OMAP_WKG_ENB_D_0 0x1c
+#define OMAP_WKG_ENB_E_0 0x20
#define OMAP_WKG_ENB_A_1 0x410
#define OMAP_WKG_ENB_B_1 0x414
#define OMAP_WKG_ENB_C_1 0x418
#define OMAP_WKG_ENB_D_1 0x41c
+#define OMAP_WKG_ENB_E_1 0x420
#define OMAP_AUX_CORE_BOOT_0 0x800
#define OMAP_AUX_CORE_BOOT_1 0x804
#define OMAP_PTMSYNCREQ_MASK 0xc00
@@ -28,4 +33,6 @@
#define OMAP_TIMESTAMPCYCLEHI 0xc0c
extern int __init omap_wakeupgen_init(void);
+extern void __iomem *omap_get_wakeupgen_base(void);
+extern int omap_secure_apis_support(void);
#endif
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
index 56c345b..414083b 100644
--- a/arch/arm/mach-omap2/omap-hotplug.c
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -17,8 +17,10 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/smp.h>
+#include <linux/io.h>
#include <asm/cacheflush.h>
+#include <mach/omap-wakeupgen.h>
#include "common.h"
@@ -35,7 +37,8 @@ int platform_cpu_kill(unsigned int cpu)
*/
void __ref platform_cpu_die(unsigned int cpu)
{
- unsigned int this_cpu;
+ unsigned int boot_cpu = 0;
+ void __iomem *base = omap_get_wakeupgen_base();
flush_cache_all();
dsb();
@@ -43,16 +46,27 @@ void __ref platform_cpu_die(unsigned int cpu)
/*
* we're ready for shutdown now, so do it
*/
- if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
- pr_err("Secure clear status failed\n");
+ if (omap_secure_apis_support()) {
+ if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
+ pr_err("Secure clear status failed\n");
+ } else {
+ __raw_writel(0, base + OMAP_AUX_CORE_BOOT_0);
+ }
+
for (;;) {
/*
* Enter into low power state
*/
omap4_hotplug_cpu(cpu, PWRDM_POWER_OFF);
- this_cpu = smp_processor_id();
- if (omap_read_auxcoreboot0() == this_cpu) {
+
+ if (omap_secure_apis_support())
+ boot_cpu = omap_read_auxcoreboot0();
+ else
+ boot_cpu =
+ __raw_readl(base + OMAP_AUX_CORE_BOOT_0) >> 5;
+
+ if (boot_cpu == smp_processor_id()) {
/*
* OK, proper wakeup, we're done
*/
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index deffbf1..badfe39 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -26,6 +26,8 @@
#include <mach/hardware.h>
#include <mach/omap-secure.h>
+#include <mach/omap-wakeupgen.h>
+#include <asm/cputype.h>
#include "iomap.h"
#include "common.h"
@@ -73,6 +75,8 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
{
static struct clockdomain *cpu1_clkdm;
static bool booted;
+ void __iomem *base = omap_get_wakeupgen_base();
+
/*
* Set synchronisation state between this boot processor
* and the secondary one
@@ -85,7 +89,11 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* the AuxCoreBoot1 register is updated with cpu state
* A barrier is added to ensure that write buffer is drained
*/
- omap_modify_auxcoreboot0(0x200, 0xfffffdff);
+ if (omap_secure_apis_support())
+ omap_modify_auxcoreboot0(0x200, 0xfffffdff);
+ else
+ __raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0);
+
flush_cache_all();
smp_wmb();
@@ -124,13 +132,20 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
static void __init wakeup_secondary(void)
{
+ void __iomem *base = omap_get_wakeupgen_base();
+
/*
* Write the address of secondary startup routine into the
* AuxCoreBoot1 where ROM code will jump and start executing
* on secondary core once out of WFE
* A barrier is added to ensure that write buffer is drained
*/
- omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup));
+ if (omap_secure_apis_support())
+ omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup));
+ else
+ __raw_writel(virt_to_phys(omap5_secondary_startup),
+ base + OMAP_AUX_CORE_BOOT_1);
+
smp_wmb();
/*
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index d811c77..ae9a86f 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -33,18 +33,23 @@
#include "omap4-sar-layout.h"
#include "common.h"
-#define NR_REG_BANKS 4
-#define MAX_IRQS 128
+#define MAX_NR_REG_BANKS 5
+#define MAX_IRQS 160
#define WKG_MASK_ALL 0x00000000
#define WKG_UNMASK_ALL 0xffffffff
#define CPU_ENA_OFFSET 0x400
#define CPU0_ID 0x0
#define CPU1_ID 0x1
+#define OMAP4_NR_BANKS 4
+#define OMAP4_NR_IRQS 128
static void __iomem *wakeupgen_base;
static void __iomem *sar_base;
static DEFINE_SPINLOCK(wakeupgen_lock);
static unsigned int irq_target_cpu[NR_IRQS];
+static unsigned int irq_banks = MAX_NR_REG_BANKS;
+static unsigned int max_irqs = MAX_IRQS;
+static unsigned int omap_secure_apis;
/*
* Static helper functions.
@@ -146,13 +151,13 @@ static void wakeupgen_unmask(struct irq_data *d)
}
#ifdef CONFIG_HOTPLUG_CPU
-static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks);
+static DEFINE_PER_CPU(u32 [MAX_NR_REG_BANKS], irqmasks);
static void _wakeupgen_save_masks(unsigned int cpu)
{
u8 i;
- for (i = 0; i < NR_REG_BANKS; i++)
+ for (i = 0; i < irq_banks; i++)
per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu);
}
@@ -160,7 +165,7 @@ static void _wakeupgen_restore_masks(unsigned int cpu)
{
u8 i;
- for (i = 0; i < NR_REG_BANKS; i++)
+ for (i = 0; i < irq_banks; i++)
wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu);
}
@@ -168,7 +173,7 @@ static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg)
{
u8 i;
- for (i = 0; i < NR_REG_BANKS; i++)
+ for (i = 0; i < irq_banks; i++)
wakeupgen_writel(reg, i, cpu);
}
@@ -196,25 +201,14 @@ static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set)
#endif
#ifdef CONFIG_CPU_PM
-/*
- * Save WakeupGen interrupt context in SAR BANK3. Restore is done by
- * ROM code. WakeupGen IP is integrated along with GIC to manage the
- * interrupt wakeups from CPU low power states. It manages
- * masking/unmasking of Shared peripheral interrupts(SPI). So the
- * interrupt enable/disable control should be in sync and consistent
- * at WakeupGen and GIC so that interrupts are not lost.
- */
-static void irq_save_context(void)
+static inline void omap4_irq_save_context(void)
{
u32 i, val;
if (omap_rev() == OMAP4430_REV_ES1_0)
return;
- if (!sar_base)
- sar_base = omap4_get_sar_ram_base();
-
- for (i = 0; i < NR_REG_BANKS; i++) {
+ for (i = 0; i < irq_banks; i++) {
/* Save the CPUx interrupt mask for IRQ 0 to 127 */
val = wakeupgen_readl(i, 0);
sar_writel(val, WAKEUPGENENB_OFFSET_CPU0, i);
@@ -254,6 +248,53 @@ static void irq_save_context(void)
val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
val |= SAR_BACKUP_STATUS_WAKEUPGEN;
__raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
+
+}
+
+static inline void omap5_irq_save_context(void)
+{
+ u32 i, val;
+
+ for (i = 0; i < irq_banks; i++) {
+ /* Save the CPUx interrupt mask for IRQ 0 to 159 */
+ val = wakeupgen_readl(i, 0);
+ sar_writel(val, OMAP5_WAKEUPGENENB_OFFSET_CPU0, i);
+ val = wakeupgen_readl(i, 1);
+ sar_writel(val, OMAP5_WAKEUPGENENB_OFFSET_CPU1, i);
+ sar_writel(0x0, OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0, i);
+ sar_writel(0x0, OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1, i);
+ }
+
+ /* Save AuxBoot* registers */
+ val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+ __raw_writel(val, sar_base + OMAP5_AUXCOREBOOT0_OFFSET);
+ val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
+ __raw_writel(val, sar_base + OMAP5_AUXCOREBOOT1_OFFSET);
+
+ /* Set the Backup Bit Mask status */
+ val = __raw_readl(sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
+ val |= SAR_BACKUP_STATUS_WAKEUPGEN;
+ __raw_writel(val, sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
+
+}
+
+/*
+ * Save WakeupGen interrupt context in SAR BANK3. Restore is done by
+ * ROM code. WakeupGen IP is integrated along with GIC to manage the
+ * interrupt wakeups from CPU low power states. It manages
+ * masking/unmasking of Shared peripheral interrupts(SPI). So the
+ * interrupt enable/disable control should be in sync and consistent
+ * at WakeupGen and GIC so that interrupts are not lost.
+ */
+static void irq_save_context(void)
+{
+ if (!sar_base)
+ sar_base = omap4_get_sar_ram_base();
+
+ if (cpu_is_omap54xx())
+ omap5_irq_save_context();
+ else
+ omap4_irq_save_context();
}
/*
@@ -262,9 +303,14 @@ static void irq_save_context(void)
static void irq_sar_clear(void)
{
u32 val;
- val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
+ u32 offset = SAR_BACKUP_STATUS_OFFSET;
+
+ if (cpu_is_omap54xx())
+ offset = OMAP5_SAR_BACKUP_STATUS_OFFSET;
+
+ val = __raw_readl(sar_base + offset);
val &= ~SAR_BACKUP_STATUS_WAKEUPGEN;
- __raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
+ __raw_writel(val, sar_base + offset);
}
/*
@@ -336,13 +382,25 @@ static struct notifier_block irq_notifier_block = {
static void __init irq_pm_init(void)
{
- cpu_pm_register_notifier(&irq_notifier_block);
+ /* FIXME: Remove this when MPU OSWR support is added */
+ if (!cpu_is_omap54xx())
+ cpu_pm_register_notifier(&irq_notifier_block);
}
#else
static void __init irq_pm_init(void)
{}
#endif
+void __iomem *omap_get_wakeupgen_base(void)
+{
+ return wakeupgen_base;
+}
+
+int omap_secure_apis_support(void)
+{
+ return omap_secure_apis;
+}
+
/*
* Initialise the wakeupgen module.
*/
@@ -358,12 +416,18 @@ int __init omap_wakeupgen_init(void)
}
/* Static mapping, never released */
- wakeupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K);
+ wakeupgen_base = ioremap(OMAP_WKUPGEN_BASE, SZ_4K);
if (WARN_ON(!wakeupgen_base))
return -ENOMEM;
+ if (cpu_is_omap44xx()) {
+ irq_banks = OMAP4_NR_BANKS;
+ max_irqs = OMAP4_NR_IRQS;
+ omap_secure_apis = 1;
+ }
+
/* Clear all IRQ bitmasks at wakeupGen level */
- for (i = 0; i < NR_REG_BANKS; i++) {
+ for (i = 0; i < irq_banks; i++) {
wakeupgen_writel(0, i, CPU0_ID);
wakeupgen_writel(0, i, CPU1_ID);
}
@@ -382,7 +446,7 @@ int __init omap_wakeupgen_init(void)
*/
/* Associate all the IRQs to boot CPU like GIC init does. */
- for (i = 0; i < NR_IRQS; i++)
+ for (i = 0; i < max_irqs; i++)
irq_target_cpu[i] = boot_cpu;
irq_hotplug_init();
diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h
index fe5b545..e170fe8 100644
--- a/arch/arm/mach-omap2/omap4-sar-layout.h
+++ b/arch/arm/mach-omap2/omap4-sar-layout.h
@@ -12,7 +12,7 @@
#define OMAP_ARCH_OMAP4_SAR_LAYOUT_H
/*
- * SAR BANK offsets from base address OMAP44XX_SAR_RAM_BASE
+ * SAR BANK offsets from base address OMAP44XX/54XX_SAR_RAM_BASE
*/
#define SAR_BANK1_OFFSET 0x0000
#define SAR_BANK2_OFFSET 0x1000
@@ -47,4 +47,14 @@
#define PTMSYNCREQ_EN_OFFSET (SAR_BANK3_OFFSET + 0x6d0)
#define SAR_BACKUP_STATUS_WAKEUPGEN 0x10
+/* WakeUpGen save restore offset from OMAP54XX_SAR_RAM_BASE */
+#define OMAP5_WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8d4)
+#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8e8)
+#define OMAP5_WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x8fc)
+#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x910)
+#define OMAP5_AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0x924)
+#define OMAP5_AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x928)
+#define OMAP5_AMBA_IF_MODE_OFFSET (SAR_BANK3_OFFSET + 0x92c)
+#define OMAP5_SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x800)
+
#endif
--
1.7.9.5
More information about the linux-arm-kernel
mailing list