[PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers

Arnaud Patard (Rtp) arnaud.patard at rtp-net.org
Thu Jul 5 06:38:51 EDT 2012


Thomas Petazzoni <thomas.petazzoni at free-electrons.com> writes:

> Le Thu, 05 Jul 2012 12:11:40 +0200,
> Arnaud Patard (Rtp) <arnaud.patard at rtp-net.org> a écrit :
>
>> > You are not the only one working in this area. Arnaud Patard said he
>> > was look at this as well. 
>> 
>> yeah, but tbh I've not made anything yet. If Thomas has already some
>> code for it, we should try to make it "generic" so as to use it on
>> armada xp and orion platforms.
>
> The MPP registers are identical on Armada XP/370 and 88F6281 (not sure
> which other SoC datasheet I should be checking). Basically, it's just a
> range of contiguous registers, with 4 bits per pin to select the
> function.


iirc, other SoCs are similar. The small exception being dove I
guess. Dove has a 3rd gpo [the gpios are output only] bank but to be
used as gpio require that a special bit is set and it's for all gpios of
this bank. You'll find this bit in the "general mpp configuration
register" if you look at the datasheet.

>
> So my pinmux driver should simply work as is for Orion as well. The
> only difference between platforms is the number of MPP pins that are
> available, but this number also varies between versions of Armada XP
> and Armada 370, so I already support this in the driver.
>

Are there some output-only gpio on armada xp/370 like on kirkwood/dove ?


Arnaud



More information about the linux-arm-kernel mailing list