[PATCH] clk: mxs: imx28: decrease the frequency of ref_io1 for SSP2 and SSP3
Shawn Guo
shawn.guo at linaro.org
Wed Jul 4 23:06:56 EDT 2012
On Wed, Jul 04, 2012 at 01:49:54PM +0300, Lauri Hintsala wrote:
> SSP0 and SSP1 use ref_io0 which has decreased frequency. Expand
> the frequency fix for ref_io1 to get SSP2 and SSP3 to work.
>
> Signed-off-by: Lauri Hintsala <lauri.hintsala at bluegiga.com>
Applied, thanks.
> ---
> drivers/clk/mxs/clk-imx28.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
> index 2826a26..0097c3a 100644
> --- a/drivers/clk/mxs/clk-imx28.c
> +++ b/drivers/clk/mxs/clk-imx28.c
> @@ -112,11 +112,11 @@ static void __init clk_misc_init(void)
>
> /*
> * 480 MHz seems too high to be ssp clock source directly,
> - * so set frac0 to get a 288 MHz ref_io0.
> + * so set frac0 to get a 288 MHz ref_io0 and ref_io1.
> */
> val = readl_relaxed(FRAC0);
> - val &= ~(0x3f << BP_FRAC0_IO0FRAC);
> - val |= 30 << BP_FRAC0_IO0FRAC;
> + val &= ~((0x3f << BP_FRAC0_IO0FRAC) | (0x3f << BP_FRAC0_IO1FRAC));
> + val |= (30 << BP_FRAC0_IO0FRAC) | (30 << BP_FRAC0_IO1FRAC);
> writel_relaxed(val, FRAC0);
> }
>
> --
> 1.7.9.5
>
More information about the linux-arm-kernel
mailing list