[PATCH] clk: mxs: imx28: decrease the frequency of ref_io1 for SSP2 and SSP3

Marek Vasut marex at denx.de
Wed Jul 4 12:23:27 EDT 2012


Dear Shawn Guo,

> On Wed, Jul 04, 2012 at 01:49:54PM +0300, Lauri Hintsala wrote:
> > SSP0 and SSP1 use ref_io0 which has decreased frequency. Expand
> > the frequency fix for ref_io1 to get SSP2 and SSP3 to work.
> 
> The patch looks okay.  Just to confirm that you are running SSP2&SSP3
> into the same frequency problem that we had with SSP0&SSP1?  I never
> got a board to verify that for SSP2&SSP3.

What problem is that? I've been running the SPI driver against two types of SPI 
flashes on SSP2 without trouble ...

> Regards,
> Shawn
> 
> > Signed-off-by: Lauri Hintsala <lauri.hintsala at bluegiga.com>
> > ---
> > 
> >  drivers/clk/mxs/clk-imx28.c |    6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
> > index 2826a26..0097c3a 100644
> > --- a/drivers/clk/mxs/clk-imx28.c
> > +++ b/drivers/clk/mxs/clk-imx28.c
> > @@ -112,11 +112,11 @@ static void __init clk_misc_init(void)
> > 
> >  	/*
> >  	
> >  	 * 480 MHz seems too high to be ssp clock source directly,
> > 
> > -	 * so set frac0 to get a 288 MHz ref_io0.
> > +	 * so set frac0 to get a 288 MHz ref_io0 and ref_io1.
> > 
> >  	 */
> >  	
> >  	val = readl_relaxed(FRAC0);
> > 
> > -	val &= ~(0x3f << BP_FRAC0_IO0FRAC);
> > -	val |= 30 << BP_FRAC0_IO0FRAC;
> > +	val &= ~((0x3f << BP_FRAC0_IO0FRAC) | (0x3f << BP_FRAC0_IO1FRAC));
> > +	val |= (30 << BP_FRAC0_IO0FRAC) | (30 << BP_FRAC0_IO1FRAC);
> > 
> >  	writel_relaxed(val, FRAC0);
> >  
> >  }

Best regards,
Marek Vasut



More information about the linux-arm-kernel mailing list