[PATCH] remoteproc: adopt the driver core's alloc/add/del/put naming
Ohad Ben-Cohen
ohad at wizery.com
Wed Jul 4 09:36:59 EDT 2012
To make remoteproc's API more intuitive for developers, we adopt
the driver core's naming, i.e. alloc -> add -> del -> put. We'll also
add register/unregister when their first user shows up.
Otherwise - there's no functional change here.
Suggested by Russell King <linux at arm.linux.org.uk>.
Cc: Russell King <linux at arm.linux.org.uk>
Cc: Stephen Boyd <sboyd at codeaurora.org>
Cc: Fernando Guzman Lugo <fernando.lugo at ti.com>
Cc: Sjur Brændeland <sjur.brandeland at stericsson.com>
Signed-off-by: Ohad Ben-Cohen <ohad at wizery.com>
---
Documentation/remoteproc.txt | 18 +++++++++---------
drivers/remoteproc/omap_remoteproc.c | 8 ++++----
drivers/remoteproc/remoteproc_core.c | 32 ++++++++++++++++----------------
include/linux/remoteproc.h | 6 +++---
4 files changed, 32 insertions(+), 32 deletions(-)
diff --git a/Documentation/remoteproc.txt b/Documentation/remoteproc.txt
index f33c3bb..23a09b8 100644
--- a/Documentation/remoteproc.txt
+++ b/Documentation/remoteproc.txt
@@ -90,21 +90,21 @@ int dummy_rproc_example(struct rproc *my_rproc)
This function should be used by rproc implementations during
initialization of the remote processor.
After creating an rproc handle using this function, and when ready,
- implementations should then call rproc_register() to complete
+ implementations should then call rproc_add() to complete
the registration of the remote processor.
On success, the new rproc is returned, and on failure, NULL.
Note: _never_ directly deallocate @rproc, even if it was not registered
- yet. Instead, when you need to unroll rproc_alloc(), use rproc_free().
+ yet. Instead, when you need to unroll rproc_alloc(), use rproc_put().
- void rproc_free(struct rproc *rproc)
+ void rproc_put(struct rproc *rproc)
- Free an rproc handle that was allocated by rproc_alloc.
This function essentially unrolls rproc_alloc(), by decrementing the
rproc's refcount. It doesn't directly free rproc; that would happen
only if there are no other references to rproc and its refcount now
dropped to zero.
- int rproc_register(struct rproc *rproc)
+ int rproc_add(struct rproc *rproc)
- Register @rproc with the remoteproc framework, after it has been
allocated with rproc_alloc().
This is called by the platform-specific rproc implementation, whenever
@@ -117,15 +117,15 @@ int dummy_rproc_example(struct rproc *my_rproc)
of registering this remote processor, additional virtio drivers might get
probed.
- int rproc_unregister(struct rproc *rproc)
- - Unroll rproc_register().
+ int rproc_del(struct rproc *rproc)
+ - Unroll rproc_add().
This function should be called when the platform specific rproc
implementation decides to remove the rproc device. it should
- _only_ be called if a previous invocation of rproc_register()
+ _only_ be called if a previous invocation of rproc_add()
has completed successfully.
- After rproc_unregister() returns, @rproc is still valid, and its
- last refcount should be decremented by calling rproc_free().
+ After rproc_del() returns, @rproc is still valid, and its
+ last refcount should be decremented by calling rproc_put().
Returns 0 on success and -EINVAL if @rproc isn't valid.
diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
index 0f1afc9..a1f7ac1 100644
--- a/drivers/remoteproc/omap_remoteproc.c
+++ b/drivers/remoteproc/omap_remoteproc.c
@@ -199,14 +199,14 @@ static int __devinit omap_rproc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, rproc);
- ret = rproc_register(rproc);
+ ret = rproc_add(rproc);
if (ret)
goto free_rproc;
return 0;
free_rproc:
- rproc_free(rproc);
+ rproc_put(rproc);
return ret;
}
@@ -214,8 +214,8 @@ static int __devexit omap_rproc_remove(struct platform_device *pdev)
{
struct rproc *rproc = platform_get_drvdata(pdev);
- rproc_unregister(rproc);
- rproc_free(rproc);
+ rproc_del(rproc);
+ rproc_put(rproc);
return 0;
}
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index cbe4f7a..c0a701d 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1102,7 +1102,7 @@ static void rproc_fw_config_virtio(const struct firmware *fw, void *context)
out:
if (fw)
release_firmware(fw);
- /* allow rproc_unregister() contexts, if any, to proceed */
+ /* allow rproc_del() contexts, if any, to proceed */
complete_all(&rproc->firmware_loading_complete);
}
@@ -1251,7 +1251,7 @@ out:
EXPORT_SYMBOL(rproc_shutdown);
/**
- * rproc_register() - register a remote processor
+ * rproc_add() - register a remote processor
* @rproc: the remote processor handle to register
*
* Registers @rproc with the remoteproc framework, after it has been
@@ -1270,7 +1270,7 @@ EXPORT_SYMBOL(rproc_shutdown);
* of registering this remote processor, additional virtio drivers might be
* probed.
*/
-int rproc_register(struct rproc *rproc)
+int rproc_add(struct rproc *rproc)
{
struct device *dev = &rproc->dev;
int ret = 0;
@@ -1287,7 +1287,7 @@ int rproc_register(struct rproc *rproc)
/* create debugfs entries */
rproc_create_debug_dir(rproc);
- /* rproc_unregister() calls must wait until async loader completes */
+ /* rproc_del() calls must wait until async loader completes */
init_completion(&rproc->firmware_loading_complete);
/*
@@ -1308,7 +1308,7 @@ int rproc_register(struct rproc *rproc)
return ret;
}
-EXPORT_SYMBOL(rproc_register);
+EXPORT_SYMBOL(rproc_add);
/**
* rproc_type_release() - release a remote processor instance
@@ -1356,13 +1356,13 @@ static struct device_type rproc_type = {
* of the remote processor.
*
* After creating an rproc handle using this function, and when ready,
- * implementations should then call rproc_register() to complete
+ * implementations should then call rproc_add() to complete
* the registration of the remote processor.
*
* On success the new rproc is returned, and on failure, NULL.
*
* Note: _never_ directly deallocate @rproc, even if it was not registered
- * yet. Instead, when you need to unroll rproc_alloc(), use rproc_free().
+ * yet. Instead, when you need to unroll rproc_alloc(), use rproc_put().
*/
struct rproc *rproc_alloc(struct device *dev, const char *name,
const struct rproc_ops *ops,
@@ -1416,7 +1416,7 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
EXPORT_SYMBOL(rproc_alloc);
/**
- * rproc_free() - unroll rproc_alloc()
+ * rproc_put() - unroll rproc_alloc()
* @rproc: the remote processor handle
*
* This function decrements the rproc dev refcount.
@@ -1424,28 +1424,28 @@ EXPORT_SYMBOL(rproc_alloc);
* If no one holds any reference to rproc anymore, then its refcount would
* now drop to zero, and it would be freed.
*/
-void rproc_free(struct rproc *rproc)
+void rproc_put(struct rproc *rproc)
{
put_device(&rproc->dev);
}
-EXPORT_SYMBOL(rproc_free);
+EXPORT_SYMBOL(rproc_put);
/**
- * rproc_unregister() - unregister a remote processor
+ * rproc_del() - unregister a remote processor
* @rproc: rproc handle to unregister
*
* This function should be called when the platform specific rproc
* implementation decides to remove the rproc device. it should
- * _only_ be called if a previous invocation of rproc_register()
+ * _only_ be called if a previous invocation of rproc_add()
* has completed successfully.
*
- * After rproc_unregister() returns, @rproc isn't freed yet, because
+ * After rproc_del() returns, @rproc isn't freed yet, because
* of the outstanding reference created by rproc_alloc. To decrement that
- * one last refcount, one still needs to call rproc_free().
+ * one last refcount, one still needs to call rproc_put().
*
* Returns 0 on success and -EINVAL if @rproc isn't valid.
*/
-int rproc_unregister(struct rproc *rproc)
+int rproc_del(struct rproc *rproc)
{
struct rproc_vdev *rvdev, *tmp;
@@ -1463,7 +1463,7 @@ int rproc_unregister(struct rproc *rproc)
return 0;
}
-EXPORT_SYMBOL(rproc_unregister);
+EXPORT_SYMBOL(rproc_del);
static int __init remoteproc_init(void)
{
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index b88d6af..eea3ac8 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -452,9 +452,9 @@ struct rproc_vdev {
struct rproc *rproc_alloc(struct device *dev, const char *name,
const struct rproc_ops *ops,
const char *firmware, int len);
-void rproc_free(struct rproc *rproc);
-int rproc_register(struct rproc *rproc);
-int rproc_unregister(struct rproc *rproc);
+void rproc_put(struct rproc *rproc);
+int rproc_add(struct rproc *rproc);
+int rproc_del(struct rproc *rproc);
int rproc_boot(struct rproc *rproc);
void rproc_shutdown(struct rproc *rproc);
--
1.7.10.rc3.1067.gb129051
More information about the linux-arm-kernel
mailing list