[PATCHv4 02/18] i2c: omap: simplify num_bytes handling

[Shubhrajyoti D]

From: Felipe Balbi <balbi at ti.com>

trivial patch, no functional changes

If the fifo is disabled or fifo_size is 0 the num_bytes
is set to 1. Else it is set to fifo_size or in case of a
draining interrupt the remaining bytes in the buff stat.
So the zero check is redundant and can be safely optimised.

Signed-off-by: Felipe Balbi <balbi at ti.com>
Reviewed-by : Santosh Shilimkar <santosh.shilimkar at ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti at ti.com>
---
 drivers/i2c/busses/i2c-omap.c |    6 ++----
 1 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 0946be5..440e41f 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -831,8 +831,7 @@ complete:
 							OMAP_I2C_BUFSTAT_REG)
 							>> 8) & 0x3F;
 			}
-			while (num_bytes) {
-				num_bytes--;
+			while (num_bytes--) {
 				w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
 				if (dev->buf_len) {
 					*dev->buf++ = w;
@@ -874,8 +873,7 @@ complete:
 							OMAP_I2C_BUFSTAT_REG)
 							& 0x3F;
 			}
-			while (num_bytes) {
-				num_bytes--;
+			while (num_bytes--) {
 				w = 0;
 				if (dev->buf_len) {
 					w = *dev->buf++;
-- 
1.7.5.4