[PATCH v2 1/2] arm: imx: enable flexcan on imx25, imx35, imx53, imx6q

[Sascha Hauer]

Shawn,

In case you want to apply this one:

Acked-by: Sascha Hauer <s.hauer at pengutronix.de>

Sascha

On Mon, Jul 02, 2012 at 11:03:00AM +0200, Marc Kleine-Budde wrote:
> Aas the flexcan driver has DT binding for some time now. This patch makes
> the flexcan driver available in the can drivers menu if a SOC with flexcan
> is enabled.
> 
> Cc: Sascha Hauer <sha at pengutronix.de>
> Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
> ---
>  arch/arm/mach-imx/Kconfig |    4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index eff4db5..c296851 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -52,6 +52,7 @@ config SOC_IMX25
>  	select ARCH_MX25
>  	select COMMON_CLK
>  	select CPU_ARM926T
> +	select HAVE_CAN_FLEXCAN if CAN
>  	select ARCH_MXC_IOMUX_V3
>  	select MXC_AVIC
>  
> @@ -79,6 +80,7 @@ config SOC_IMX35
>  	select HAVE_EPIT
>  	select MXC_AVIC
>  	select SMP_ON_UP if SMP
> +	select HAVE_CAN_FLEXCAN if CAN
>  
>  config SOC_IMX5
>  	select CPU_V7
> @@ -105,6 +107,7 @@ config	SOC_IMX53
>  	select SOC_IMX5
>  	select ARCH_MX5
>  	select ARCH_MX53
> +	select HAVE_CAN_FLEXCAN if CAN
>  
>  if ARCH_IMX_V4_V5
>  
> @@ -826,6 +829,7 @@ config SOC_IMX6Q
>  	select COMMON_CLK
>  	select CPU_V7
>  	select HAVE_ARM_SCU
> +	select HAVE_CAN_FLEXCAN if CAN
>  	select HAVE_IMX_GPC
>  	select HAVE_IMX_MMDC
>  	select HAVE_IMX_SRC
> -- 
> 1.7.10
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |