[PATCH 1/2] ARM: EXYNOS: add support GPIO for EXYNOS5250
Sylwester Nawrocki
s.nawrocki at samsung.com
Tue Jan 31 11:34:02 EST 2012
Hi Kukjin,
I have few comments below...
On 01/31/2012 04:50 PM, Kukjin Kim wrote:
> From: Sangsu Park <sangsu4u.park at samsung.com>
>
> This patch adds follwing.
s/follwing/following.
nit: AFAIK it's a good habit not to start a commit description
with "This patch.."
> - IO-map for EXYNOS5250 GPIO support
> - EXYNOS5250 GPIO bank size/number definitions
> - memory map definition for S5P GPIO4
>
> Signed-off-by: Sangsu Park <sangsu4u.park at samsung.com>
> Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
> ---
> arch/arm/mach-exynos/common.c | 20 +++
> arch/arm/mach-exynos/include/mach/gpio.h | 221 ++++++++++++++++++++------
> arch/arm/mach-exynos/include/mach/map.h | 4 +
> arch/arm/plat-samsung/include/plat/map-s5p.h | 1 +
> 4 files changed, 199 insertions(+), 47 deletions(-)
>
> diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
> index 6ab3c5a..225acc7 100644
> --- a/arch/arm/mach-exynos/common.c
> +++ b/arch/arm/mach-exynos/common.c
> @@ -271,6 +271,26 @@ static struct map_desc exynos5_iodesc[] __initdata = {
> .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_DIST),
> .length = SZ_64K,
> .type = MT_DEVICE,
> + }, {
> + .virtual = (unsigned long)S5P_VA_GPIO1,
> + .pfn = __phys_to_pfn(EXYNOS5_PA_GPIO1),
> + .length = SZ_4K,
> + .type = MT_DEVICE,
> + }, {
> + .virtual = (unsigned long)S5P_VA_GPIO2,
> + .pfn = __phys_to_pfn(EXYNOS5_PA_GPIO2),
> + .length = SZ_4K,
> + .type = MT_DEVICE,
> + }, {
> + .virtual = (unsigned long)S5P_VA_GPIO3,
> + .pfn = __phys_to_pfn(EXYNOS5_PA_GPIO3),
> + .length = SZ_4K,
> + .type = MT_DEVICE,
> + }, {
> + .virtual = (unsigned long)S5P_VA_GPIO4,
> + .pfn = __phys_to_pfn(EXYNOS5_PA_GPIO4),
> + .length = SZ_256,
> + .type = MT_DEVICE,
> },
> };
>
> diff --git a/arch/arm/mach-exynos/include/mach/gpio.h b/arch/arm/mach-exynos/include/mach/gpio.h
> index 80523ca..a9c3944 100644
> --- a/arch/arm/mach-exynos/include/mach/gpio.h
> +++ b/arch/arm/mach-exynos/include/mach/gpio.h
> @@ -13,8 +13,11 @@
> #ifndef __ASM_ARCH_GPIO_H
> #define __ASM_ARCH_GPIO_H __FILE__
>
> -/* Practically, GPIO banks up to GPZ are the configurable gpio banks */
> +/* MACRO for EXYNOS GPIO numbering */
> +#define EXYNOS_GPIO_NEXT(__gpio) \
> + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
>
> +/* EXYNOS4 serise */
> /* GPIO bank sizes */
> #define EXYNOS4_GPIO_A0_NR (8)
> #define EXYNOS4_GPIO_A1_NR (6)
> @@ -55,51 +58,47 @@
> #define EXYNOS4_GPIO_Z_NR (7)
>
> /* GPIO bank numbers */
> -
> -#define EXYNOS4_GPIO_NEXT(__gpio) \
> - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
> -
> -enum s5p_gpio_number {
> +enum exynos4_gpio_number {
> EXYNOS4_GPIO_A0_START = 0,
> - EXYNOS4_GPIO_A1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A0),
> - EXYNOS4_GPIO_B_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A1),
> - EXYNOS4_GPIO_C0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_B),
> - EXYNOS4_GPIO_C1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C0),
> - EXYNOS4_GPIO_D0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C1),
> - EXYNOS4_GPIO_D1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D0),
> - EXYNOS4_GPIO_E0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D1),
> - EXYNOS4_GPIO_E1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E0),
> - EXYNOS4_GPIO_E2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E1),
> - EXYNOS4_GPIO_E3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E2),
> - EXYNOS4_GPIO_E4_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E3),
> - EXYNOS4_GPIO_F0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E4),
> - EXYNOS4_GPIO_F1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F0),
> - EXYNOS4_GPIO_F2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F1),
> - EXYNOS4_GPIO_F3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F2),
> - EXYNOS4_GPIO_J0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F3),
> - EXYNOS4_GPIO_J1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J0),
> - EXYNOS4_GPIO_K0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J1),
> - EXYNOS4_GPIO_K1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K0),
> - EXYNOS4_GPIO_K2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K1),
> - EXYNOS4_GPIO_K3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K2),
> - EXYNOS4_GPIO_L0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K3),
> - EXYNOS4_GPIO_L1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L0),
> - EXYNOS4_GPIO_L2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L1),
> - EXYNOS4_GPIO_X0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L2),
> - EXYNOS4_GPIO_X1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X0),
> - EXYNOS4_GPIO_X2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X1),
> - EXYNOS4_GPIO_X3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X2),
> - EXYNOS4_GPIO_Y0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X3),
> - EXYNOS4_GPIO_Y1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y0),
> - EXYNOS4_GPIO_Y2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y1),
> - EXYNOS4_GPIO_Y3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y2),
> - EXYNOS4_GPIO_Y4_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y3),
> - EXYNOS4_GPIO_Y5_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y4),
> - EXYNOS4_GPIO_Y6_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y5),
> - EXYNOS4_GPIO_Z_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y6),
> + EXYNOS4_GPIO_A1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_A0),
> + EXYNOS4_GPIO_B_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_A1),
> + EXYNOS4_GPIO_C0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_B),
> + EXYNOS4_GPIO_C1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C0),
> + EXYNOS4_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C1),
> + EXYNOS4_GPIO_D1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D0),
> + EXYNOS4_GPIO_E0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D1),
> + EXYNOS4_GPIO_E1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E0),
> + EXYNOS4_GPIO_E2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E1),
> + EXYNOS4_GPIO_E3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E2),
> + EXYNOS4_GPIO_E4_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E3),
> + EXYNOS4_GPIO_F0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E4),
> + EXYNOS4_GPIO_F1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F0),
> + EXYNOS4_GPIO_F2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F1),
> + EXYNOS4_GPIO_F3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F2),
> + EXYNOS4_GPIO_J0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F3),
> + EXYNOS4_GPIO_J1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_J0),
> + EXYNOS4_GPIO_K0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_J1),
> + EXYNOS4_GPIO_K1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K0),
> + EXYNOS4_GPIO_K2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K1),
> + EXYNOS4_GPIO_K3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K2),
> + EXYNOS4_GPIO_L0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K3),
> + EXYNOS4_GPIO_L1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L0),
> + EXYNOS4_GPIO_L2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L1),
> + EXYNOS4_GPIO_X0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L2),
> + EXYNOS4_GPIO_X1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X0),
> + EXYNOS4_GPIO_X2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X1),
> + EXYNOS4_GPIO_X3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X2),
> + EXYNOS4_GPIO_Y0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X3),
> + EXYNOS4_GPIO_Y1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y0),
> + EXYNOS4_GPIO_Y2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y1),
> + EXYNOS4_GPIO_Y3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y2),
> + EXYNOS4_GPIO_Y4_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y3),
> + EXYNOS4_GPIO_Y5_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y4),
> + EXYNOS4_GPIO_Y6_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y5),
> + EXYNOS4_GPIO_Z_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y6),
> };
Are you planning to add support for exynos4212/exynos4412 as well
anytime soon ? I've done some work towards this and I'd like to
avoid duplicating efforts.
> -/* EXYNOS4 GPIO number definitions */
> +/* GPIO number definitions */
> #define EXYNOS4_GPA0(_nr) (EXYNOS4_GPIO_A0_START + (_nr))
> #define EXYNOS4_GPA1(_nr) (EXYNOS4_GPIO_A1_START + (_nr))
> #define EXYNOS4_GPB(_nr) (EXYNOS4_GPIO_B_START + (_nr))
> @@ -140,10 +139,138 @@ enum s5p_gpio_number {
>
> /* the end of the EXYNOS4 specific gpios */
> #define EXYNOS4_GPIO_END (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + 1)
> -#define S3C_GPIO_END EXYNOS4_GPIO_END
>
> -/* define the number of gpios we need to the one after the GPZ() range */
> -#define ARCH_NR_GPIOS (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + \
> - CONFIG_SAMSUNG_GPIO_EXTRA + 1)
> +/* EXYNOS5 serise */
> +/* GPIO bank sizes */
> +#define EXYNOS5_GPIO_A0_NR (8)
nit: It's been always a mystery to me, what are the parentheses around the
numbers helpful for ? IMHO even if there is more things like this in
the file it might be better to skip extra parentheses here.
> +#define EXYNOS5_GPIO_A1_NR (6)
> +#define EXYNOS5_GPIO_A2_NR (8)
> +#define EXYNOS5_GPIO_B0_NR (5)
> +#define EXYNOS5_GPIO_B1_NR (5)
> +#define EXYNOS5_GPIO_B2_NR (4)
> +#define EXYNOS5_GPIO_B3_NR (4)
> +#define EXYNOS5_GPIO_C0_NR (7)
> +#define EXYNOS5_GPIO_C1_NR (7)
> +#define EXYNOS5_GPIO_C2_NR (7)
> +#define EXYNOS5_GPIO_C3_NR (7)
> +#define EXYNOS5_GPIO_D0_NR (8)
> +#define EXYNOS5_GPIO_D1_NR (8)
> +#define EXYNOS5_GPIO_Y0_NR (6)
> +#define EXYNOS5_GPIO_Y1_NR (4)
> +#define EXYNOS5_GPIO_Y2_NR (6)
> +#define EXYNOS5_GPIO_Y3_NR (8)
> +#define EXYNOS5_GPIO_Y4_NR (8)
> +#define EXYNOS5_GPIO_Y5_NR (8)
> +#define EXYNOS5_GPIO_Y6_NR (8)
> +#define EXYNOS5_GPIO_X0_NR (8)
> +#define EXYNOS5_GPIO_X1_NR (8)
> +#define EXYNOS5_GPIO_X2_NR (8)
> +#define EXYNOS5_GPIO_X3_NR (8)
> +#define EXYNOS5_GPIO_E0_NR (8)
> +#define EXYNOS5_GPIO_E1_NR (2)
> +#define EXYNOS5_GPIO_F0_NR (4)
> +#define EXYNOS5_GPIO_F1_NR (4)
> +#define EXYNOS5_GPIO_G0_NR (8)
> +#define EXYNOS5_GPIO_G1_NR (8)
> +#define EXYNOS5_GPIO_G2_NR (2)
> +#define EXYNOS5_GPIO_H0_NR (4)
> +#define EXYNOS5_GPIO_H1_NR (8)
> +#define EXYNOS5_GPIO_V0_NR (8)
> +#define EXYNOS5_GPIO_V1_NR (8)
> +#define EXYNOS5_GPIO_V2_NR (8)
> +#define EXYNOS5_GPIO_V3_NR (8)
> +#define EXYNOS5_GPIO_V4_NR (2)
> +#define EXYNOS5_GPIO_Z_NR (7)
Thanks,
--
Sylwester Nawrocki
Samsung Poland R&D Center
More information about the linux-arm-kernel
mailing list