[PATCH 1/2] ARM: OMAP3: PM: remove superfluous calls to pwrdm_clear_all_prev_pwrst()

[Kevin Hilman]

Paul Walmsley <paul at pwsan.com> writes:

> Remove some superfluous calls to pwrdm_clear_all_prev_pwrst().
> pwrdm_pre_transition(), which appears a few lines after these calls,
> invokes pwrdm_clear_all_prev_pwrst() on each powerdomain -- there's no
> need to do it twice.

It looks like these two for OMAP4 are surpurfluous since the immediately
follow a call to pwrdm_pre_transition() as well.

Santosh/Rajendra, please confirm/ack.

Kevin


diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 1d5d010..bbabe1d 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -263,12 +263,10 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 	 * In MPUSS OSWR or device OFF, interrupt controller  contest is lost.
 	 */
 	mpuss_clear_prev_logic_pwrst();
-	pwrdm_clear_all_prev_pwrst(mpuss_pd);
 	if ((pwrdm_read_next_pwrst(mpuss_pd) == PWRDM_POWER_RET) &&
 		(pwrdm_read_logic_retst(mpuss_pd) == PWRDM_POWER_OFF))
 		save_state = 2;
 
-	clear_cpu_prev_pwrst(cpu);
 	cpu_clear_prev_logic_pwrst(cpu);
 	set_cpu_next_pwrst(cpu, power_state);
 	set_cpu_wakeup_addr(cpu, virt_to_phys(omap4_cpu_resume));