[PATCH 21/31] ARM: amba: realview: get rid of private platform amba_device initializer

[Will Deacon]

On Thu, Jan 26, 2012 at 05:25:27PM +0000, Russell King - ARM Linux wrote:
> On Wed, Jan 25, 2012 at 11:06:47AM +0000, Russell King - ARM Linux wrote:
> > Right, so with the stack of amba patches on top, it looks like this,
> > which to me looks sane.  I haven't build-tested it though.
> 
> Will,

Hi Russell,

> Did you see this?  Any comment?

Sorry, this somehow got buried in other mail.

> > 
> > diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
> > index 5c3c625..708f841 100644
> > --- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h
> > +++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
> > @@ -40,6 +40,7 @@
> >  #define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
> >  #define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
> >  #define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
> > +#define IRQ_DC1176_GPIO0	(IRQ_DC1176_GIC_START + 16)
> >  #define IRQ_DC1176_SSP		(IRQ_DC1176_GIC_START + 17)	/* SSP port */
> >  #define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
> >  #define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
> > @@ -73,7 +74,6 @@
> >  #define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
> >  #define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
> >  
> > -#define IRQ_PB1176_GPIO0	-1
> >  #define IRQ_PB1176_SCTL		-1
> >  
> >  #define NR_GIC_PB1176		2
> > diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
> > index 1b6e60c..b1d7caf 100644
> > --- a/arch/arm/mach-realview/realview_pb1176.c
> > +++ b/arch/arm/mach-realview/realview_pb1176.c
> > @@ -143,7 +143,7 @@ static struct pl022_ssp_controller ssp0_plat_data = {
> >  #define PB1176_CLCD_IRQ	{ IRQ_DC1176_CLCD }
> >  #define SCTL_IRQ	{ }
> >  #define PB1176_WATCHDOG_IRQ	{ IRQ_DC1176_WATCHDOG }
> > -#define PB1176_GPIO0_IRQ	{ IRQ_PB1176_GPIO0 }
> > +#define PB1176_GPIO0_IRQ	{ IRQ_DC1176_GPIO0 }
> >  #define GPIO1_IRQ	{ IRQ_PB1176_GPIO1 }
> >  #define PB1176_RTC_IRQ	{ IRQ_DC1176_RTC }
> >  #define SCI_IRQ		{ IRQ_PB1176_SCI }

This looks fine to me. It matches what I posted originally, which was the
intention.

Acked-by: Will Deacon <will.deacon at arm.com>

Will