[PATCH 29/33] MFD: ucb1x00: convert to use genirq
Russell King - ARM Linux
linux at arm.linux.org.uk
Wed Jan 25 09:39:55 EST 2012
Convert the ucb1x00 driver to use genirq's interrupt services, rather
than its own private implementation. This allows a wider range of
drivers to use the GPIO interrupts (such as the gpio_keys driver)
without being aware of the UCB1x00's private IRQ system.
This prevents the UCB1x00 core driver from being built as a module,
so adjust the configuration to add that restriction.
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
drivers/mfd/Kconfig | 5 +-
drivers/mfd/ucb1x00-core.c | 247 +++++++++++++++++--------------------------
drivers/mfd/ucb1x00-ts.c | 37 +++++--
include/linux/mfd/ucb1x00.h | 22 +---
4 files changed, 132 insertions(+), 179 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index cd13e9f..28a301b 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -847,8 +847,9 @@ config MCP_SA11X0
# Chip drivers
config MCP_UCB1200
- tristate "Support for UCB1200 / UCB1300"
- depends on MCP
+ bool "Support for UCB1200 / UCB1300"
+ depends on MCP_SA11X0
+ select MCP
config MCP_UCB1200_TS
tristate "Touchscreen interface support"
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index 6fab825..400604d 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -23,6 +23,7 @@
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/mfd/ucb1x00.h>
@@ -178,6 +179,13 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
return 0;
}
+static int ucb1x00_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+
+ return ucb->irq_base > 0 ? ucb->irq_base + offset : -ENXIO;
+}
+
/*
* UCB1300 data sheet says we must:
* 1. enable ADC => 5us (including reference startup time)
@@ -274,10 +282,9 @@ void ucb1x00_adc_disable(struct ucb1x00 *ucb)
* SIBCLK to talk to the chip. We leave the clock running until
* we have finished processing all interrupts from the chip.
*/
-static irqreturn_t ucb1x00_irq(int irqnr, void *devid)
+static void ucb1x00_irq(unsigned int irq, struct irq_desc *desc)
{
- struct ucb1x00 *ucb = devid;
- struct ucb1x00_irq *irq;
+ struct ucb1x00 *ucb = irq_desc_get_handler_data(desc);
unsigned int isr, i;
ucb1x00_enable(ucb);
@@ -285,157 +292,84 @@ static irqreturn_t ucb1x00_irq(int irqnr, void *devid)
ucb1x00_reg_write(ucb, UCB_IE_CLEAR, isr);
ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
- for (i = 0, irq = ucb->irq_handler; i < 16 && isr; i++, isr >>= 1, irq++)
- if (isr & 1 && irq->fn)
- irq->fn(i, irq->devid);
+ for (i = 0; i < 16 && isr; i++, isr >>= 1, irq++)
+ if (isr & 1)
+ generic_handle_irq(ucb->irq_base + i);
ucb1x00_disable(ucb);
-
- return IRQ_HANDLED;
}
-/**
- * ucb1x00_hook_irq - hook a UCB1x00 interrupt
- * @ucb: UCB1x00 structure describing chip
- * @idx: interrupt index
- * @fn: function to call when interrupt is triggered
- * @devid: device id to pass to interrupt handler
- *
- * Hook the specified interrupt. You can only register one handler
- * for each interrupt source. The interrupt source is not enabled
- * by this function; use ucb1x00_enable_irq instead.
- *
- * Interrupt handlers will be called with other interrupts enabled.
- *
- * Returns zero on success, or one of the following errors:
- * -EINVAL if the interrupt index is invalid
- * -EBUSY if the interrupt has already been hooked
- */
-int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid)
+static void ucb1x00_irq_update(struct ucb1x00 *ucb, unsigned mask)
{
- struct ucb1x00_irq *irq;
- int ret = -EINVAL;
-
- if (idx < 16) {
- irq = ucb->irq_handler + idx;
- ret = -EBUSY;
-
- spin_lock_irq(&ucb->lock);
- if (irq->fn == NULL) {
- irq->devid = devid;
- irq->fn = fn;
- ret = 0;
- }
- spin_unlock_irq(&ucb->lock);
- }
- return ret;
+ ucb1x00_enable(ucb);
+ if (ucb->irq_ris_enbl & mask)
+ ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+ ucb->irq_mask);
+ if (ucb->irq_fal_enbl & mask)
+ ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+ ucb->irq_mask);
+ ucb1x00_disable(ucb);
}
-/**
- * ucb1x00_enable_irq - enable an UCB1x00 interrupt source
- * @ucb: UCB1x00 structure describing chip
- * @idx: interrupt index
- * @edges: interrupt edges to enable
- *
- * Enable the specified interrupt to trigger on %UCB_RISING,
- * %UCB_FALLING or both edges. The interrupt should have been
- * hooked by ucb1x00_hook_irq.
- */
-void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges)
+static void ucb1x00_irq_noop(struct irq_data *data)
{
- unsigned long flags;
-
- if (idx < 16) {
- spin_lock_irqsave(&ucb->lock, flags);
-
- ucb1x00_enable(ucb);
- if (edges & UCB_RISING) {
- ucb->irq_ris_enbl |= 1 << idx;
- ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
- }
- if (edges & UCB_FALLING) {
- ucb->irq_fal_enbl |= 1 << idx;
- ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
- }
- ucb1x00_disable(ucb);
- spin_unlock_irqrestore(&ucb->lock, flags);
- }
}
-/**
- * ucb1x00_disable_irq - disable an UCB1x00 interrupt source
- * @ucb: UCB1x00 structure describing chip
- * @edges: interrupt edges to disable
- *
- * Disable the specified interrupt triggering on the specified
- * (%UCB_RISING, %UCB_FALLING or both) edges.
- */
-void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges)
+static void ucb1x00_irq_mask(struct irq_data *data)
{
- unsigned long flags;
+ struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+ unsigned mask = 1 << (data->irq - ucb->irq_base);
- if (idx < 16) {
- spin_lock_irqsave(&ucb->lock, flags);
-
- ucb1x00_enable(ucb);
- if (edges & UCB_RISING) {
- ucb->irq_ris_enbl &= ~(1 << idx);
- ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
- }
- if (edges & UCB_FALLING) {
- ucb->irq_fal_enbl &= ~(1 << idx);
- ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
- }
- ucb1x00_disable(ucb);
- spin_unlock_irqrestore(&ucb->lock, flags);
- }
+ raw_spin_lock(&ucb->irq_lock);
+ ucb->irq_mask &= ~mask;
+ ucb1x00_irq_update(ucb, mask);
+ raw_spin_unlock(&ucb->irq_lock);
}
-/**
- * ucb1x00_free_irq - disable and free the specified UCB1x00 interrupt
- * @ucb: UCB1x00 structure describing chip
- * @idx: interrupt index
- * @devid: device id.
- *
- * Disable the interrupt source and remove the handler. devid must
- * match the devid passed when hooking the interrupt.
- *
- * Returns zero on success, or one of the following errors:
- * -EINVAL if the interrupt index is invalid
- * -ENOENT if devid does not match
- */
-int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid)
+static void ucb1x00_irq_unmask(struct irq_data *data)
{
- struct ucb1x00_irq *irq;
- int ret;
+ struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+ unsigned mask = 1 << (data->irq - ucb->irq_base);
- if (idx >= 16)
- goto bad;
-
- irq = ucb->irq_handler + idx;
- ret = -ENOENT;
+ raw_spin_lock(&ucb->irq_lock);
+ ucb->irq_mask |= mask;
+ ucb1x00_irq_update(ucb, mask);
+ raw_spin_unlock(&ucb->irq_lock);
+}
- spin_lock_irq(&ucb->lock);
- if (irq->devid == devid) {
- ucb->irq_ris_enbl &= ~(1 << idx);
- ucb->irq_fal_enbl &= ~(1 << idx);
+static int ucb1x00_irq_set_type(struct irq_data *data, unsigned int type)
+{
+ struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+ unsigned mask = 1 << (data->irq - ucb->irq_base);
- ucb1x00_enable(ucb);
- ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
- ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
- ucb1x00_disable(ucb);
+ raw_spin_lock(&ucb->irq_lock);
+ if (type & IRQ_TYPE_EDGE_RISING)
+ ucb->irq_ris_enbl |= mask;
+ else
+ ucb->irq_ris_enbl &= ~mask;
- irq->fn = NULL;
- irq->devid = NULL;
- ret = 0;
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ ucb->irq_fal_enbl |= mask;
+ else
+ ucb->irq_fal_enbl &= ~mask;
+ if (ucb->irq_mask & mask) {
+ ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+ ucb->irq_mask);
+ ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+ ucb->irq_mask);
}
- spin_unlock_irq(&ucb->lock);
- return ret;
+ raw_spin_unlock(&ucb->irq_lock);
-bad:
- printk(KERN_ERR "Freeing bad UCB1x00 irq %d\n", idx);
- return -EINVAL;
+ return 0;
}
+static struct irq_chip ucb1x00_irqchip = {
+ .name = "ucb1x00",
+ .irq_ack = ucb1x00_irq_noop,
+ .irq_mask = ucb1x00_irq_mask,
+ .irq_unmask = ucb1x00_irq_unmask,
+ .irq_set_type = ucb1x00_irq_set_type,
+};
+
static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv)
{
struct ucb1x00_dev *dev;
@@ -545,9 +479,8 @@ static int ucb1x00_probe(struct mcp *mcp)
struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data;
struct ucb1x00_driver *drv;
struct ucb1x00 *ucb;
- unsigned int id;
+ unsigned id, i, irq_base;
int ret = -ENODEV;
- int temp;
/* Tell the platform to deassert the UCB1x00 reset */
if (pdata && pdata->reset)
@@ -572,7 +505,7 @@ static int ucb1x00_probe(struct mcp *mcp)
ucb->dev.parent = &mcp->attached_device;
dev_set_name(&ucb->dev, "ucb1x00");
- spin_lock_init(&ucb->lock);
+ raw_spin_lock_init(&ucb->irq_lock);
spin_lock_init(&ucb->io_lock);
mutex_init(&ucb->adc_mutex);
@@ -593,6 +526,26 @@ static int ucb1x00_probe(struct mcp *mcp)
}
ucb->gpio.base = -1;
+ irq_base = pdata ? pdata->irq_base : 0;
+ ucb->irq_base = irq_alloc_descs(-1, irq_base, 16, -1);
+ if (ucb->irq_base < 0) {
+ dev_err(&ucb->dev, "unable to allocate 16 irqs: %d\n",
+ ucb->irq_base);
+ goto err_irq_alloc;
+ }
+
+ for (i = 0; i < 16; i++) {
+ unsigned irq = ucb->irq_base + i;
+
+ irq_set_chip_and_handler(irq, &ucb1x00_irqchip, handle_edge_irq);
+ irq_set_chip_data(irq, ucb);
+ set_irq_flags(irq, IRQF_VALID | IRQ_NOREQUEST);
+ }
+
+ irq_set_irq_type(ucb->irq, IRQ_TYPE_EDGE_RISING);
+ irq_set_handler_data(ucb->irq, ucb);
+ irq_set_chained_handler(ucb->irq, ucb1x00_irq);
+
if (pdata && pdata->gpio_base) {
ucb->gpio.label = dev_name(&ucb->dev);
ucb->gpio.dev = &ucb->dev;
@@ -603,20 +556,13 @@ static int ucb1x00_probe(struct mcp *mcp)
ucb->gpio.get = ucb1x00_gpio_get;
ucb->gpio.direction_input = ucb1x00_gpio_direction_input;
ucb->gpio.direction_output = ucb1x00_gpio_direction_output;
+ ucb->gpio.to_irq = ucb1x00_to_irq;
ret = gpiochip_add(&ucb->gpio);
if (ret)
goto err_gpio_add;
} else
dev_info(&ucb->dev, "gpio_base not set so no gpiolib support");
- ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING,
- "UCB1x00", ucb);
- if (ret) {
- dev_err(&ucb->dev, "ucb1x00: unable to grab irq%d: %d\n",
- ucb->irq, ret);
- goto err_irq;
- }
-
mcp_set_drvdata(mcp, ucb);
INIT_LIST_HEAD(&ucb->devs);
@@ -629,10 +575,11 @@ static int ucb1x00_probe(struct mcp *mcp)
return ret;
- err_irq:
- if (ucb->gpio.base != -1)
- temp = gpiochip_remove(&ucb->gpio);
err_gpio_add:
+ irq_set_chained_handler(ucb->irq, NULL);
+ err_irq_alloc:
+ if (ucb->irq_base > 0)
+ irq_free_descs(ucb->irq_base, 16);
err_no_irq:
device_del(&ucb->dev);
err_dev_add:
@@ -664,7 +611,8 @@ static void ucb1x00_remove(struct mcp *mcp)
dev_err(&ucb->dev, "Can't remove gpio chip: %d\n", ret);
}
- free_irq(ucb->irq, ucb);
+ irq_set_chained_handler(ucb->irq, NULL);
+ irq_free_descs(ucb->irq_base, 16);
device_unregister(&ucb->dev);
if (pdata && pdata->reset)
@@ -772,11 +720,6 @@ EXPORT_SYMBOL(ucb1x00_adc_enable);
EXPORT_SYMBOL(ucb1x00_adc_read);
EXPORT_SYMBOL(ucb1x00_adc_disable);
-EXPORT_SYMBOL(ucb1x00_hook_irq);
-EXPORT_SYMBOL(ucb1x00_free_irq);
-EXPORT_SYMBOL(ucb1x00_enable_irq);
-EXPORT_SYMBOL(ucb1x00_disable_irq);
-
EXPORT_SYMBOL(ucb1x00_register_driver);
EXPORT_SYMBOL(ucb1x00_unregister_driver);
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index 742d0c7..1e0e20c 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -20,8 +20,9 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
-#include <linux/smp.h>
+#include <linux/interrupt.h>
#include <linux/sched.h>
+#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/string.h>
@@ -41,6 +42,8 @@ struct ucb1x00_ts {
struct input_dev *idev;
struct ucb1x00 *ucb;
+ spinlock_t irq_lock;
+ unsigned irq_disabled;
wait_queue_head_t irq_wait;
struct task_struct *rtask;
u16 x_res;
@@ -237,7 +240,12 @@ static int ucb1x00_thread(void *_ts)
if (ucb1x00_ts_pen_down(ts)) {
set_current_state(TASK_INTERRUPTIBLE);
- ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, machine_is_collie() ? UCB_RISING : UCB_FALLING);
+ spin_lock_irq(&ts->irq_lock);
+ if (ts->irq_disabled) {
+ ts->irq_disabled = 0;
+ enable_irq(ts->ucb->irq_base + UCB_IRQ_TSPX);
+ }
+ spin_unlock_irq(&ts->irq_lock);
ucb1x00_disable(ts->ucb);
/*
@@ -280,23 +288,37 @@ static int ucb1x00_thread(void *_ts)
* We only detect touch screen _touches_ with this interrupt
* handler, and even then we just schedule our task.
*/
-static void ucb1x00_ts_irq(int idx, void *id)
+static irqreturn_t ucb1x00_ts_irq(int irq, void *id)
{
struct ucb1x00_ts *ts = id;
- ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_FALLING);
+ spin_lock(&ts->irq_lock);
+ ts->irq_disabled = 1;
+ disable_irq_nosync(ts->ucb->irq_base + UCB_IRQ_TSPX);
+ spin_unlock(&ts->irq_lock);
wake_up(&ts->irq_wait);
+
+ return IRQ_HANDLED;
}
static int ucb1x00_ts_open(struct input_dev *idev)
{
struct ucb1x00_ts *ts = input_get_drvdata(idev);
+ unsigned long flags = 0;
int ret = 0;
BUG_ON(ts->rtask);
+ if (machine_is_collie())
+ flags = IRQF_TRIGGER_RISING;
+ else
+ flags = IRQF_TRIGGER_FALLING;
+
+ ts->irq_disabled = 0;
+
init_waitqueue_head(&ts->irq_wait);
- ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_TSPX, ucb1x00_ts_irq, ts);
+ ret = request_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ucb1x00_ts_irq,
+ flags, "ucb1x00-ts", ts);
if (ret < 0)
goto out;
@@ -313,7 +335,7 @@ static int ucb1x00_ts_open(struct input_dev *idev)
if (!IS_ERR(ts->rtask)) {
ret = 0;
} else {
- ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
+ free_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ts);
ts->rtask = NULL;
ret = -EFAULT;
}
@@ -333,7 +355,7 @@ static void ucb1x00_ts_close(struct input_dev *idev)
kthread_stop(ts->rtask);
ucb1x00_enable(ts->ucb);
- ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
+ free_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ts);
ucb1x00_reg_write(ts->ucb, UCB_TS_CR, 0);
ucb1x00_disable(ts->ucb);
}
@@ -358,6 +380,7 @@ static int ucb1x00_ts_add(struct ucb1x00_dev *dev)
ts->ucb = dev->ucb;
ts->idev = idev;
ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC;
+ spin_lock_init(&ts->irq_lock);
idev->name = "Touchscreen panel";
idev->id.product = ts->ucb->id;
diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h
index 253c12c..6fb9074 100644
--- a/include/linux/mfd/ucb1x00.h
+++ b/include/linux/mfd/ucb1x00.h
@@ -112,18 +112,15 @@ enum ucb1x00_reset {
struct ucb1x00_plat_data {
void (*reset)(enum ucb1x00_reset);
+ unsigned irq_base;
int gpio_base;
};
-struct ucb1x00_irq {
- void *devid;
- void (*fn)(int, void *);
-};
-
struct ucb1x00 {
- spinlock_t lock;
+ raw_spinlock_t irq_lock;
struct mcp *mcp;
unsigned int irq;
+ int irq_base;
struct mutex adc_mutex;
spinlock_t io_lock;
u16 id;
@@ -132,7 +129,7 @@ struct ucb1x00 {
u16 adc_cr;
u16 irq_fal_enbl;
u16 irq_ris_enbl;
- struct ucb1x00_irq irq_handler[16];
+ u16 irq_mask;
struct device dev;
struct list_head node;
struct list_head devs;
@@ -255,15 +252,4 @@ unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync);
void ucb1x00_adc_enable(struct ucb1x00 *ucb);
void ucb1x00_adc_disable(struct ucb1x00 *ucb);
-/*
- * Which edges of the IRQ do you want to control today?
- */
-#define UCB_RISING (1 << 0)
-#define UCB_FALLING (1 << 1)
-
-int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid);
-void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
-void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
-int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid);
-
#endif
--
1.7.4.4
More information about the linux-arm-kernel
mailing list