[PATCH 5/6] ARM: SAMSUNG: Correct M-5MOLS sensor clock frequency on Nuri board

[Sylwester Nawrocki]

In order to keep the sensor's master clock frequency in valid range
when FIMC parent clock is xusbxti, the specified frequency must be
exactly 24MHZ, otherwise it's being set to too low value due to
rounding.

Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
 arch/arm/mach-exynos/mach-universal_c210.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 44fc43e..0e3aeb9 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -973,7 +973,7 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = {
 		.bus_type	= FIMC_MIPI_CSI2,
 		.board_info	= &m5mols_board_info,
 		.i2c_bus_num	= 0,
-		.clk_frequency	= 21600000UL,
+		.clk_frequency	= 24000000UL,
 		.csi_data_align	= 32,
 	},
 };
-- 
1.7.8.3