[PATCH 19/19] PCMCIA: sa1111: rename sa1111 socket drivers to have sa1111_ prefix.
Russell King - ARM Linux
linux at arm.linux.org.uk
Fri Jan 20 05:23:36 EST 2012
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
drivers/pcmcia/Makefile | 8 +-
drivers/pcmcia/pxa2xx_lubbock.c | 236 ------------------------------------
drivers/pcmcia/sa1100_badge4.c | 166 -------------------------
drivers/pcmcia/sa1100_jornada720.c | 114 -----------------
drivers/pcmcia/sa1100_neponset.c | 134 --------------------
drivers/pcmcia/sa1111_badge4.c | 166 +++++++++++++++++++++++++
drivers/pcmcia/sa1111_jornada720.c | 114 +++++++++++++++++
drivers/pcmcia/sa1111_lubbock.c | 236 ++++++++++++++++++++++++++++++++++++
drivers/pcmcia/sa1111_neponset.c | 134 ++++++++++++++++++++
9 files changed, 654 insertions(+), 654 deletions(-)
delete mode 100644 drivers/pcmcia/pxa2xx_lubbock.c
delete mode 100644 drivers/pcmcia/sa1100_badge4.c
delete mode 100644 drivers/pcmcia/sa1100_jornada720.c
delete mode 100644 drivers/pcmcia/sa1100_neponset.c
create mode 100644 drivers/pcmcia/sa1111_badge4.c
create mode 100644 drivers/pcmcia/sa1111_jornada720.c
create mode 100644 drivers/pcmcia/sa1111_lubbock.c
create mode 100644 drivers/pcmcia/sa1111_neponset.c
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 49d79f7..47525de 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -40,10 +40,10 @@ obj-$(CONFIG_ELECTRA_CF) += electra_cf.o
obj-$(CONFIG_PCMCIA_ALCHEMY_DEVBOARD) += db1xxx_ss.o
sa1111_cs-y += sa1111_generic.o
-sa1111_cs-$(CONFIG_ASSABET_NEPONSET) += sa1100_neponset.o
-sa1111_cs-$(CONFIG_SA1100_BADGE4) += sa1100_badge4.o
-sa1111_cs-$(CONFIG_SA1100_JORNADA720) += sa1100_jornada720.o
-sa1111_cs-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock.o
+sa1111_cs-$(CONFIG_ASSABET_NEPONSET) += sa1111_neponset.o
+sa1111_cs-$(CONFIG_SA1100_BADGE4) += sa1111_badge4.o
+sa1111_cs-$(CONFIG_SA1100_JORNADA720) += sa1111_jornada720.o
+sa1111_cs-$(CONFIG_ARCH_LUBBOCK) += sa1111_lubbock.o
sa1100_cs-y += sa1100_generic.o
sa1100_cs-$(CONFIG_SA1100_ASSABET) += sa1100_assabet.o
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
deleted file mode 100644
index c5caf57..0000000
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * linux/drivers/pcmcia/pxa2xx_lubbock.c
- *
- * Author: George Davis
- * Created: Jan 10, 2002
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Originally based upon linux/drivers/pcmcia/sa1100_neponset.c
- *
- * Lubbock PCMCIA specific routines.
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <mach/hardware.h>
-#include <asm/hardware/sa1111.h>
-#include <asm/mach-types.h>
-#include <mach/lubbock.h>
-
-#include "sa1111_generic.h"
-
-static int
-lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
- const socket_state_t *state)
-{
- struct sa1111_pcmcia_socket *s = to_skt(skt);
- unsigned int pa_dwr_mask, pa_dwr_set, misc_mask, misc_set;
- int ret = 0;
-
- pa_dwr_mask = pa_dwr_set = misc_mask = misc_set = 0;
-
- /* Lubbock uses the Maxim MAX1602, with the following connections:
- *
- * Socket 0 (PCMCIA):
- * MAX1602 Lubbock Register
- * Pin Signal
- * ----- ------- ----------------------
- * A0VPP S0_PWR0 SA-1111 GPIO A<0>
- * A1VPP S0_PWR1 SA-1111 GPIO A<1>
- * A0VCC S0_PWR2 SA-1111 GPIO A<2>
- * A1VCC S0_PWR3 SA-1111 GPIO A<3>
- * VX VCC
- * VY +3.3V
- * 12IN +12V
- * CODE +3.3V Cirrus Code, CODE = High (VY)
- *
- * Socket 1 (CF):
- * MAX1602 Lubbock Register
- * Pin Signal
- * ----- ------- ----------------------
- * A0VPP GND VPP is not connected
- * A1VPP GND VPP is not connected
- * A0VCC S1_PWR0 MISC_WR<14>
- * A1VCC S1_PWR1 MISC_WR<15>
- * VX VCC
- * VY +3.3V
- * 12IN GND VPP is not connected
- * CODE +3.3V Cirrus Code, CODE = High (VY)
- *
- */
-
- again:
- switch (skt->nr) {
- case 0:
- pa_dwr_mask = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3;
-
- switch (state->Vcc) {
- case 0: /* Hi-Z */
- break;
-
- case 33: /* VY */
- pa_dwr_set |= GPIO_A3;
- break;
-
- case 50: /* VX */
- pa_dwr_set |= GPIO_A2;
- break;
-
- default:
- printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
- __func__, state->Vcc);
- ret = -1;
- }
-
- switch (state->Vpp) {
- case 0: /* Hi-Z */
- break;
-
- case 120: /* 12IN */
- pa_dwr_set |= GPIO_A1;
- break;
-
- default: /* VCC */
- if (state->Vpp == state->Vcc)
- pa_dwr_set |= GPIO_A0;
- else {
- printk(KERN_ERR "%s(): unrecognized Vpp %u\n",
- __func__, state->Vpp);
- ret = -1;
- break;
- }
- }
- break;
-
- case 1:
- misc_mask = (1 << 15) | (1 << 14);
-
- switch (state->Vcc) {
- case 0: /* Hi-Z */
- break;
-
- case 33: /* VY */
- misc_set |= 1 << 15;
- break;
-
- case 50: /* VX */
- misc_set |= 1 << 14;
- break;
-
- default:
- printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
- __func__, state->Vcc);
- ret = -1;
- break;
- }
-
- if (state->Vpp != state->Vcc && state->Vpp != 0) {
- printk(KERN_ERR "%s(): CF slot cannot support Vpp %u\n",
- __func__, state->Vpp);
- ret = -1;
- break;
- }
- break;
-
- default:
- ret = -1;
- }
-
- if (ret == 0)
- ret = sa1111_pcmcia_configure_socket(skt, state);
-
- if (ret == 0) {
- lubbock_set_misc_wr(misc_mask, misc_set);
- sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
- }
-
-#if 1
- if (ret == 0 && state->Vcc == 33) {
- struct pcmcia_state new_state;
-
- /*
- * HACK ALERT:
- * We can't sense the voltage properly on Lubbock before
- * actually applying some power to the socket (catch 22).
- * Resense the socket Voltage Sense pins after applying
- * socket power.
- *
- * Note: It takes about 2.5ms for the MAX1602 VCC output
- * to rise.
- */
- mdelay(3);
-
- sa1111_pcmcia_socket_state(skt, &new_state);
-
- if (!new_state.vs_3v && !new_state.vs_Xv) {
- /*
- * Switch to 5V, Configure socket with 5V voltage
- */
- lubbock_set_misc_wr(misc_mask, 0);
- sa1111_set_io(s->dev, pa_dwr_mask, 0);
-
- /*
- * It takes about 100ms to turn off Vcc.
- */
- mdelay(100);
-
- /*
- * We need to hack around the const qualifier as
- * well to keep this ugly workaround localized and
- * not force it to the rest of the code. Barf bags
- * available in the seat pocket in front of you!
- */
- ((socket_state_t *)state)->Vcc = 50;
- ((socket_state_t *)state)->Vpp = 50;
- goto again;
- }
- }
-#endif
-
- return ret;
-}
-
-static struct pcmcia_low_level lubbock_pcmcia_ops = {
- .owner = THIS_MODULE,
- .configure_socket = lubbock_pcmcia_configure_socket,
- .first = 0,
- .nr = 2,
-};
-
-#include "pxa2xx_base.h"
-
-int pcmcia_lubbock_init(struct sa1111_dev *sadev)
-{
- int ret = -ENODEV;
-
- if (machine_is_lubbock()) {
- /*
- * Set GPIO_A<3:0> to be outputs for the MAX1600,
- * and switch to standby mode.
- */
- sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
- sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
- sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
-
- /* Set CF Socket 1 power to standby mode. */
- lubbock_set_misc_wr((1 << 15) | (1 << 14), 0);
-
- pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops);
- pxa2xx_configure_sockets(&sadev->dev);
- ret = sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops,
- pxa2xx_drv_pcmcia_add_one);
- }
-
- return ret;
-}
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/sa1100_badge4.c b/drivers/pcmcia/sa1100_badge4.c
deleted file mode 100644
index 4d206f4..0000000
--- a/drivers/pcmcia/sa1100_badge4.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * linux/drivers/pcmcia/sa1100_badge4.c
- *
- * BadgePAD 4 PCMCIA specific routines
- *
- * Christopher Hoover <ch at hpl.hp.com>
- *
- * Copyright (C) 2002 Hewlett-Packard Company
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <mach/badge4.h>
-#include <asm/hardware/sa1111.h>
-
-#include "sa1111_generic.h"
-
-/*
- * BadgePAD 4 Details
- *
- * PCM Vcc:
- *
- * PCM Vcc on BadgePAD 4 can be jumpered for 3v3 (short pins 1 and 3
- * on JP6) or 5v0 (short pins 3 and 5 on JP6).
- *
- * PCM Vpp:
- *
- * PCM Vpp on BadgePAD 4 can be jumpered for 12v0 (short pins 4 and 6
- * on JP6) or tied to PCM Vcc (short pins 2 and 4 on JP6). N.B.,
- * 12v0 operation requires that the power supply actually supply 12v0
- * via pin 7 of JP7.
- *
- * CF Vcc:
- *
- * CF Vcc on BadgePAD 4 can be jumpered either for 3v3 (short pins 1
- * and 2 on JP10) or 5v0 (short pins 2 and 3 on JP10).
- *
- * Unfortunately there's no way programmatically to determine how a
- * given board is jumpered. This code assumes a default jumpering
- * as described below.
- *
- * If the defaults aren't correct, you may override them with a pcmv
- * setup argument: pcmv=<pcm vcc>,<pcm vpp>,<cf vcc>. The units are
- * tenths of volts; e.g. pcmv=33,120,50 indicates 3v3 PCM Vcc, 12v0
- * PCM Vpp, and 5v0 CF Vcc.
- *
- */
-
-static int badge4_pcmvcc = 50; /* pins 3 and 5 jumpered on JP6 */
-static int badge4_pcmvpp = 50; /* pins 2 and 4 jumpered on JP6 */
-static int badge4_cfvcc = 33; /* pins 1 and 2 jumpered on JP10 */
-
-static void complain_about_jumpering(const char *whom,
- const char *supply,
- int given, int wanted)
-{
- printk(KERN_ERR
- "%s: %s %d.%dV wanted but board is jumpered for %s %d.%dV operation"
- "; re-jumper the board and/or use pcmv=xx,xx,xx\n",
- whom, supply,
- wanted / 10, wanted % 10,
- supply,
- given / 10, given % 10);
-}
-
-static int
-badge4_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
-{
- int ret;
-
- switch (skt->nr) {
- case 0:
- if ((state->Vcc != 0) &&
- (state->Vcc != badge4_pcmvcc)) {
- complain_about_jumpering(__func__, "pcmvcc",
- badge4_pcmvcc, state->Vcc);
- // Apply power regardless of the jumpering.
- // return -1;
- }
- if ((state->Vpp != 0) &&
- (state->Vpp != badge4_pcmvpp)) {
- complain_about_jumpering(__func__, "pcmvpp",
- badge4_pcmvpp, state->Vpp);
- return -1;
- }
- break;
-
- case 1:
- if ((state->Vcc != 0) &&
- (state->Vcc != badge4_cfvcc)) {
- complain_about_jumpering(__func__, "cfvcc",
- badge4_cfvcc, state->Vcc);
- return -1;
- }
- break;
-
- default:
- return -1;
- }
-
- ret = sa1111_pcmcia_configure_socket(skt, state);
- if (ret == 0) {
- unsigned long flags;
- int need5V;
-
- local_irq_save(flags);
-
- need5V = ((state->Vcc == 50) || (state->Vpp == 50));
-
- badge4_set_5V(BADGE4_5V_PCMCIA_SOCK(skt->nr), need5V);
-
- local_irq_restore(flags);
- }
-
- return ret;
-}
-
-static struct pcmcia_low_level badge4_pcmcia_ops = {
- .owner = THIS_MODULE,
- .configure_socket = badge4_pcmcia_configure_socket,
- .first = 0,
- .nr = 2,
-};
-
-int pcmcia_badge4_init(struct device *dev)
-{
- int ret = -ENODEV;
-
- if (machine_is_badge4()) {
- printk(KERN_INFO
- "%s: badge4_pcmvcc=%d, badge4_pcmvpp=%d, badge4_cfvcc=%d\n",
- __func__,
- badge4_pcmvcc, badge4_pcmvpp, badge4_cfvcc);
-
- sa11xx_drv_pcmcia_ops(&badge4_pcmcia_ops);
- ret = sa1111_pcmcia_add(dev, &badge4_pcmcia_ops,
- sa11xx_drv_pcmcia_add_one);
- }
-
- return ret;
-}
-
-static int __init pcmv_setup(char *s)
-{
- int v[4];
-
- s = get_options(s, ARRAY_SIZE(v), v);
-
- if (v[0] >= 1) badge4_pcmvcc = v[1];
- if (v[0] >= 2) badge4_pcmvpp = v[2];
- if (v[0] >= 3) badge4_cfvcc = v[3];
-
- return 1;
-}
-
-__setup("pcmv=", pcmv_setup);
diff --git a/drivers/pcmcia/sa1100_jornada720.c b/drivers/pcmcia/sa1100_jornada720.c
deleted file mode 100644
index 69428d1..0000000
--- a/drivers/pcmcia/sa1100_jornada720.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * drivers/pcmcia/sa1100_jornada720.c
- *
- * Jornada720 PCMCIA specific routines
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/hardware/sa1111.h>
-#include <asm/mach-types.h>
-
-#include "sa1111_generic.h"
-
-/* Does SOCKET1_3V actually do anything? */
-#define SOCKET0_POWER GPIO_GPIO0
-#define SOCKET0_3V GPIO_GPIO2
-#define SOCKET1_POWER (GPIO_GPIO1 | GPIO_GPIO3)
-#define SOCKET1_3V GPIO_GPIO3
-
-static int
-jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
-{
- struct sa1111_pcmcia_socket *s = to_skt(skt);
- unsigned int pa_dwr_mask, pa_dwr_set;
- int ret;
-
- printk(KERN_INFO "%s(): config socket %d vcc %d vpp %d\n", __func__,
- skt->nr, state->Vcc, state->Vpp);
-
- switch (skt->nr) {
- case 0:
- pa_dwr_mask = SOCKET0_POWER | SOCKET0_3V;
-
- switch (state->Vcc) {
- default:
- case 0:
- pa_dwr_set = 0;
- break;
- case 33:
- pa_dwr_set = SOCKET0_POWER | SOCKET0_3V;
- break;
- case 50:
- pa_dwr_set = SOCKET0_POWER;
- break;
- }
- break;
-
- case 1:
- pa_dwr_mask = SOCKET1_POWER;
-
- switch (state->Vcc) {
- default:
- case 0:
- pa_dwr_set = 0;
- break;
- case 33:
- pa_dwr_set = SOCKET1_POWER;
- break;
- case 50:
- pa_dwr_set = SOCKET1_POWER;
- break;
- }
- break;
-
- default:
- return -1;
- }
-
- if (state->Vpp != state->Vcc && state->Vpp != 0) {
- printk(KERN_ERR "%s(): slot cannot support VPP %u\n",
- __func__, state->Vpp);
- return -EPERM;
- }
-
- ret = sa1111_pcmcia_configure_socket(skt, state);
- if (ret == 0)
- sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
-
- return ret;
-}
-
-static struct pcmcia_low_level jornada720_pcmcia_ops = {
- .owner = THIS_MODULE,
- .configure_socket = jornada720_pcmcia_configure_socket,
- .first = 0,
- .nr = 2,
-};
-
-int __devinit pcmcia_jornada720_init(struct device *dev)
-{
- int ret = -ENODEV;
-
- if (machine_is_jornada720()) {
- unsigned int pin = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3;
-
- GRER |= 0x00000002;
-
- /* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */
- sa1111_set_io_dir(dev, pin, 0, 0);
- sa1111_set_io(dev, pin, 0);
- sa1111_set_sleep_io(dev, pin, 0);
-
- sa11xx_drv_pcmcia_ops(&jornada720_pcmcia_ops);
- ret = sa1111_pcmcia_add(dev, &jornada720_pcmcia_ops,
- sa11xx_drv_pcmcia_add_one);
- }
-
- return ret;
-}
diff --git a/drivers/pcmcia/sa1100_neponset.c b/drivers/pcmcia/sa1100_neponset.c
deleted file mode 100644
index 50f297d..0000000
--- a/drivers/pcmcia/sa1100_neponset.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * linux/drivers/pcmcia/sa1100_neponset.c
- *
- * Neponset PCMCIA specific routines
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <mach/neponset.h>
-#include <asm/hardware/sa1111.h>
-
-#include "sa1111_generic.h"
-
-/*
- * Neponset uses the Maxim MAX1600, with the following connections:
- *
- * MAX1600 Neponset
- *
- * A0VCC SA-1111 GPIO A<1>
- * A1VCC SA-1111 GPIO A<0>
- * A0VPP CPLD NCR A0VPP
- * A1VPP CPLD NCR A1VPP
- * B0VCC SA-1111 GPIO A<2>
- * B1VCC SA-1111 GPIO A<3>
- * B0VPP ground (slot B is CF)
- * B1VPP ground (slot B is CF)
- *
- * VX VCC (5V)
- * VY VCC3_3 (3.3V)
- * 12INA 12V
- * 12INB ground (slot B is CF)
- *
- * The MAX1600 CODE pin is tied to ground, placing the device in
- * "Standard Intel code" mode. Refer to the Maxim data sheet for
- * the corresponding truth table.
- */
-
-static int
-neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
-{
- struct sa1111_pcmcia_socket *s = to_skt(skt);
- unsigned int ncr_mask, ncr_set, pa_dwr_mask, pa_dwr_set;
- int ret;
-
- switch (skt->nr) {
- case 0:
- pa_dwr_mask = GPIO_A0 | GPIO_A1;
- ncr_mask = NCR_A0VPP | NCR_A1VPP;
-
- if (state->Vpp == 0)
- ncr_set = 0;
- else if (state->Vpp == 120)
- ncr_set = NCR_A1VPP;
- else if (state->Vpp == state->Vcc)
- ncr_set = NCR_A0VPP;
- else {
- printk(KERN_ERR "%s(): unrecognized VPP %u\n",
- __func__, state->Vpp);
- return -1;
- }
- break;
-
- case 1:
- pa_dwr_mask = GPIO_A2 | GPIO_A3;
- ncr_mask = 0;
- ncr_set = 0;
-
- if (state->Vpp != state->Vcc && state->Vpp != 0) {
- printk(KERN_ERR "%s(): CF slot cannot support VPP %u\n",
- __func__, state->Vpp);
- return -1;
- }
- break;
-
- default:
- return -1;
- }
-
- /*
- * pa_dwr_set is the mask for selecting Vcc on both sockets.
- * pa_dwr_mask selects which bits (and therefore socket) we change.
- */
- switch (state->Vcc) {
- default:
- case 0: pa_dwr_set = 0; break;
- case 33: pa_dwr_set = GPIO_A1|GPIO_A2; break;
- case 50: pa_dwr_set = GPIO_A0|GPIO_A3; break;
- }
-
- ret = sa1111_pcmcia_configure_socket(skt, state);
- if (ret == 0) {
- unsigned long flags;
-
- local_irq_save(flags);
- NCR_0 = (NCR_0 & ~ncr_mask) | ncr_set;
-
- local_irq_restore(flags);
- sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
- }
-
- return ret;
-}
-
-static struct pcmcia_low_level neponset_pcmcia_ops = {
- .owner = THIS_MODULE,
- .configure_socket = neponset_pcmcia_configure_socket,
- .first = 0,
- .nr = 2,
-};
-
-int pcmcia_neponset_init(struct sa1111_dev *sadev)
-{
- int ret = -ENODEV;
-
- if (machine_is_assabet()) {
- /*
- * Set GPIO_A<3:0> to be outputs for the MAX1600,
- * and switch to standby mode.
- */
- sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
- sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
- sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
- sa11xx_drv_pcmcia_ops(&neponset_pcmcia_ops);
- ret = sa1111_pcmcia_add(sadev, &neponset_pcmcia_ops,
- sa11xx_drv_pcmcia_add_one);
- }
-
- return ret;
-}
diff --git a/drivers/pcmcia/sa1111_badge4.c b/drivers/pcmcia/sa1111_badge4.c
new file mode 100644
index 0000000..4d206f4
--- /dev/null
+++ b/drivers/pcmcia/sa1111_badge4.c
@@ -0,0 +1,166 @@
+/*
+ * linux/drivers/pcmcia/sa1100_badge4.c
+ *
+ * BadgePAD 4 PCMCIA specific routines
+ *
+ * Christopher Hoover <ch at hpl.hp.com>
+ *
+ * Copyright (C) 2002 Hewlett-Packard Company
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <mach/badge4.h>
+#include <asm/hardware/sa1111.h>
+
+#include "sa1111_generic.h"
+
+/*
+ * BadgePAD 4 Details
+ *
+ * PCM Vcc:
+ *
+ * PCM Vcc on BadgePAD 4 can be jumpered for 3v3 (short pins 1 and 3
+ * on JP6) or 5v0 (short pins 3 and 5 on JP6).
+ *
+ * PCM Vpp:
+ *
+ * PCM Vpp on BadgePAD 4 can be jumpered for 12v0 (short pins 4 and 6
+ * on JP6) or tied to PCM Vcc (short pins 2 and 4 on JP6). N.B.,
+ * 12v0 operation requires that the power supply actually supply 12v0
+ * via pin 7 of JP7.
+ *
+ * CF Vcc:
+ *
+ * CF Vcc on BadgePAD 4 can be jumpered either for 3v3 (short pins 1
+ * and 2 on JP10) or 5v0 (short pins 2 and 3 on JP10).
+ *
+ * Unfortunately there's no way programmatically to determine how a
+ * given board is jumpered. This code assumes a default jumpering
+ * as described below.
+ *
+ * If the defaults aren't correct, you may override them with a pcmv
+ * setup argument: pcmv=<pcm vcc>,<pcm vpp>,<cf vcc>. The units are
+ * tenths of volts; e.g. pcmv=33,120,50 indicates 3v3 PCM Vcc, 12v0
+ * PCM Vpp, and 5v0 CF Vcc.
+ *
+ */
+
+static int badge4_pcmvcc = 50; /* pins 3 and 5 jumpered on JP6 */
+static int badge4_pcmvpp = 50; /* pins 2 and 4 jumpered on JP6 */
+static int badge4_cfvcc = 33; /* pins 1 and 2 jumpered on JP10 */
+
+static void complain_about_jumpering(const char *whom,
+ const char *supply,
+ int given, int wanted)
+{
+ printk(KERN_ERR
+ "%s: %s %d.%dV wanted but board is jumpered for %s %d.%dV operation"
+ "; re-jumper the board and/or use pcmv=xx,xx,xx\n",
+ whom, supply,
+ wanted / 10, wanted % 10,
+ supply,
+ given / 10, given % 10);
+}
+
+static int
+badge4_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
+{
+ int ret;
+
+ switch (skt->nr) {
+ case 0:
+ if ((state->Vcc != 0) &&
+ (state->Vcc != badge4_pcmvcc)) {
+ complain_about_jumpering(__func__, "pcmvcc",
+ badge4_pcmvcc, state->Vcc);
+ // Apply power regardless of the jumpering.
+ // return -1;
+ }
+ if ((state->Vpp != 0) &&
+ (state->Vpp != badge4_pcmvpp)) {
+ complain_about_jumpering(__func__, "pcmvpp",
+ badge4_pcmvpp, state->Vpp);
+ return -1;
+ }
+ break;
+
+ case 1:
+ if ((state->Vcc != 0) &&
+ (state->Vcc != badge4_cfvcc)) {
+ complain_about_jumpering(__func__, "cfvcc",
+ badge4_cfvcc, state->Vcc);
+ return -1;
+ }
+ break;
+
+ default:
+ return -1;
+ }
+
+ ret = sa1111_pcmcia_configure_socket(skt, state);
+ if (ret == 0) {
+ unsigned long flags;
+ int need5V;
+
+ local_irq_save(flags);
+
+ need5V = ((state->Vcc == 50) || (state->Vpp == 50));
+
+ badge4_set_5V(BADGE4_5V_PCMCIA_SOCK(skt->nr), need5V);
+
+ local_irq_restore(flags);
+ }
+
+ return ret;
+}
+
+static struct pcmcia_low_level badge4_pcmcia_ops = {
+ .owner = THIS_MODULE,
+ .configure_socket = badge4_pcmcia_configure_socket,
+ .first = 0,
+ .nr = 2,
+};
+
+int pcmcia_badge4_init(struct device *dev)
+{
+ int ret = -ENODEV;
+
+ if (machine_is_badge4()) {
+ printk(KERN_INFO
+ "%s: badge4_pcmvcc=%d, badge4_pcmvpp=%d, badge4_cfvcc=%d\n",
+ __func__,
+ badge4_pcmvcc, badge4_pcmvpp, badge4_cfvcc);
+
+ sa11xx_drv_pcmcia_ops(&badge4_pcmcia_ops);
+ ret = sa1111_pcmcia_add(dev, &badge4_pcmcia_ops,
+ sa11xx_drv_pcmcia_add_one);
+ }
+
+ return ret;
+}
+
+static int __init pcmv_setup(char *s)
+{
+ int v[4];
+
+ s = get_options(s, ARRAY_SIZE(v), v);
+
+ if (v[0] >= 1) badge4_pcmvcc = v[1];
+ if (v[0] >= 2) badge4_pcmvpp = v[2];
+ if (v[0] >= 3) badge4_cfvcc = v[3];
+
+ return 1;
+}
+
+__setup("pcmv=", pcmv_setup);
diff --git a/drivers/pcmcia/sa1111_jornada720.c b/drivers/pcmcia/sa1111_jornada720.c
new file mode 100644
index 0000000..69428d1
--- /dev/null
+++ b/drivers/pcmcia/sa1111_jornada720.c
@@ -0,0 +1,114 @@
+/*
+ * drivers/pcmcia/sa1100_jornada720.c
+ *
+ * Jornada720 PCMCIA specific routines
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+
+#include <mach/hardware.h>
+#include <asm/hardware/sa1111.h>
+#include <asm/mach-types.h>
+
+#include "sa1111_generic.h"
+
+/* Does SOCKET1_3V actually do anything? */
+#define SOCKET0_POWER GPIO_GPIO0
+#define SOCKET0_3V GPIO_GPIO2
+#define SOCKET1_POWER (GPIO_GPIO1 | GPIO_GPIO3)
+#define SOCKET1_3V GPIO_GPIO3
+
+static int
+jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
+{
+ struct sa1111_pcmcia_socket *s = to_skt(skt);
+ unsigned int pa_dwr_mask, pa_dwr_set;
+ int ret;
+
+ printk(KERN_INFO "%s(): config socket %d vcc %d vpp %d\n", __func__,
+ skt->nr, state->Vcc, state->Vpp);
+
+ switch (skt->nr) {
+ case 0:
+ pa_dwr_mask = SOCKET0_POWER | SOCKET0_3V;
+
+ switch (state->Vcc) {
+ default:
+ case 0:
+ pa_dwr_set = 0;
+ break;
+ case 33:
+ pa_dwr_set = SOCKET0_POWER | SOCKET0_3V;
+ break;
+ case 50:
+ pa_dwr_set = SOCKET0_POWER;
+ break;
+ }
+ break;
+
+ case 1:
+ pa_dwr_mask = SOCKET1_POWER;
+
+ switch (state->Vcc) {
+ default:
+ case 0:
+ pa_dwr_set = 0;
+ break;
+ case 33:
+ pa_dwr_set = SOCKET1_POWER;
+ break;
+ case 50:
+ pa_dwr_set = SOCKET1_POWER;
+ break;
+ }
+ break;
+
+ default:
+ return -1;
+ }
+
+ if (state->Vpp != state->Vcc && state->Vpp != 0) {
+ printk(KERN_ERR "%s(): slot cannot support VPP %u\n",
+ __func__, state->Vpp);
+ return -EPERM;
+ }
+
+ ret = sa1111_pcmcia_configure_socket(skt, state);
+ if (ret == 0)
+ sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
+
+ return ret;
+}
+
+static struct pcmcia_low_level jornada720_pcmcia_ops = {
+ .owner = THIS_MODULE,
+ .configure_socket = jornada720_pcmcia_configure_socket,
+ .first = 0,
+ .nr = 2,
+};
+
+int __devinit pcmcia_jornada720_init(struct device *dev)
+{
+ int ret = -ENODEV;
+
+ if (machine_is_jornada720()) {
+ unsigned int pin = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3;
+
+ GRER |= 0x00000002;
+
+ /* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */
+ sa1111_set_io_dir(dev, pin, 0, 0);
+ sa1111_set_io(dev, pin, 0);
+ sa1111_set_sleep_io(dev, pin, 0);
+
+ sa11xx_drv_pcmcia_ops(&jornada720_pcmcia_ops);
+ ret = sa1111_pcmcia_add(dev, &jornada720_pcmcia_ops,
+ sa11xx_drv_pcmcia_add_one);
+ }
+
+ return ret;
+}
diff --git a/drivers/pcmcia/sa1111_lubbock.c b/drivers/pcmcia/sa1111_lubbock.c
new file mode 100644
index 0000000..c5caf57
--- /dev/null
+++ b/drivers/pcmcia/sa1111_lubbock.c
@@ -0,0 +1,236 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_lubbock.c
+ *
+ * Author: George Davis
+ * Created: Jan 10, 2002
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Originally based upon linux/drivers/pcmcia/sa1100_neponset.c
+ *
+ * Lubbock PCMCIA specific routines.
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <mach/hardware.h>
+#include <asm/hardware/sa1111.h>
+#include <asm/mach-types.h>
+#include <mach/lubbock.h>
+
+#include "sa1111_generic.h"
+
+static int
+lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ struct sa1111_pcmcia_socket *s = to_skt(skt);
+ unsigned int pa_dwr_mask, pa_dwr_set, misc_mask, misc_set;
+ int ret = 0;
+
+ pa_dwr_mask = pa_dwr_set = misc_mask = misc_set = 0;
+
+ /* Lubbock uses the Maxim MAX1602, with the following connections:
+ *
+ * Socket 0 (PCMCIA):
+ * MAX1602 Lubbock Register
+ * Pin Signal
+ * ----- ------- ----------------------
+ * A0VPP S0_PWR0 SA-1111 GPIO A<0>
+ * A1VPP S0_PWR1 SA-1111 GPIO A<1>
+ * A0VCC S0_PWR2 SA-1111 GPIO A<2>
+ * A1VCC S0_PWR3 SA-1111 GPIO A<3>
+ * VX VCC
+ * VY +3.3V
+ * 12IN +12V
+ * CODE +3.3V Cirrus Code, CODE = High (VY)
+ *
+ * Socket 1 (CF):
+ * MAX1602 Lubbock Register
+ * Pin Signal
+ * ----- ------- ----------------------
+ * A0VPP GND VPP is not connected
+ * A1VPP GND VPP is not connected
+ * A0VCC S1_PWR0 MISC_WR<14>
+ * A1VCC S1_PWR1 MISC_WR<15>
+ * VX VCC
+ * VY +3.3V
+ * 12IN GND VPP is not connected
+ * CODE +3.3V Cirrus Code, CODE = High (VY)
+ *
+ */
+
+ again:
+ switch (skt->nr) {
+ case 0:
+ pa_dwr_mask = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3;
+
+ switch (state->Vcc) {
+ case 0: /* Hi-Z */
+ break;
+
+ case 33: /* VY */
+ pa_dwr_set |= GPIO_A3;
+ break;
+
+ case 50: /* VX */
+ pa_dwr_set |= GPIO_A2;
+ break;
+
+ default:
+ printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
+ __func__, state->Vcc);
+ ret = -1;
+ }
+
+ switch (state->Vpp) {
+ case 0: /* Hi-Z */
+ break;
+
+ case 120: /* 12IN */
+ pa_dwr_set |= GPIO_A1;
+ break;
+
+ default: /* VCC */
+ if (state->Vpp == state->Vcc)
+ pa_dwr_set |= GPIO_A0;
+ else {
+ printk(KERN_ERR "%s(): unrecognized Vpp %u\n",
+ __func__, state->Vpp);
+ ret = -1;
+ break;
+ }
+ }
+ break;
+
+ case 1:
+ misc_mask = (1 << 15) | (1 << 14);
+
+ switch (state->Vcc) {
+ case 0: /* Hi-Z */
+ break;
+
+ case 33: /* VY */
+ misc_set |= 1 << 15;
+ break;
+
+ case 50: /* VX */
+ misc_set |= 1 << 14;
+ break;
+
+ default:
+ printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
+ __func__, state->Vcc);
+ ret = -1;
+ break;
+ }
+
+ if (state->Vpp != state->Vcc && state->Vpp != 0) {
+ printk(KERN_ERR "%s(): CF slot cannot support Vpp %u\n",
+ __func__, state->Vpp);
+ ret = -1;
+ break;
+ }
+ break;
+
+ default:
+ ret = -1;
+ }
+
+ if (ret == 0)
+ ret = sa1111_pcmcia_configure_socket(skt, state);
+
+ if (ret == 0) {
+ lubbock_set_misc_wr(misc_mask, misc_set);
+ sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
+ }
+
+#if 1
+ if (ret == 0 && state->Vcc == 33) {
+ struct pcmcia_state new_state;
+
+ /*
+ * HACK ALERT:
+ * We can't sense the voltage properly on Lubbock before
+ * actually applying some power to the socket (catch 22).
+ * Resense the socket Voltage Sense pins after applying
+ * socket power.
+ *
+ * Note: It takes about 2.5ms for the MAX1602 VCC output
+ * to rise.
+ */
+ mdelay(3);
+
+ sa1111_pcmcia_socket_state(skt, &new_state);
+
+ if (!new_state.vs_3v && !new_state.vs_Xv) {
+ /*
+ * Switch to 5V, Configure socket with 5V voltage
+ */
+ lubbock_set_misc_wr(misc_mask, 0);
+ sa1111_set_io(s->dev, pa_dwr_mask, 0);
+
+ /*
+ * It takes about 100ms to turn off Vcc.
+ */
+ mdelay(100);
+
+ /*
+ * We need to hack around the const qualifier as
+ * well to keep this ugly workaround localized and
+ * not force it to the rest of the code. Barf bags
+ * available in the seat pocket in front of you!
+ */
+ ((socket_state_t *)state)->Vcc = 50;
+ ((socket_state_t *)state)->Vpp = 50;
+ goto again;
+ }
+ }
+#endif
+
+ return ret;
+}
+
+static struct pcmcia_low_level lubbock_pcmcia_ops = {
+ .owner = THIS_MODULE,
+ .configure_socket = lubbock_pcmcia_configure_socket,
+ .first = 0,
+ .nr = 2,
+};
+
+#include "pxa2xx_base.h"
+
+int pcmcia_lubbock_init(struct sa1111_dev *sadev)
+{
+ int ret = -ENODEV;
+
+ if (machine_is_lubbock()) {
+ /*
+ * Set GPIO_A<3:0> to be outputs for the MAX1600,
+ * and switch to standby mode.
+ */
+ sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
+ sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
+ sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
+
+ /* Set CF Socket 1 power to standby mode. */
+ lubbock_set_misc_wr((1 << 15) | (1 << 14), 0);
+
+ pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops);
+ pxa2xx_configure_sockets(&sadev->dev);
+ ret = sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops,
+ pxa2xx_drv_pcmcia_add_one);
+ }
+
+ return ret;
+}
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/sa1111_neponset.c b/drivers/pcmcia/sa1111_neponset.c
new file mode 100644
index 0000000..50f297d
--- /dev/null
+++ b/drivers/pcmcia/sa1111_neponset.c
@@ -0,0 +1,134 @@
+/*
+ * linux/drivers/pcmcia/sa1100_neponset.c
+ *
+ * Neponset PCMCIA specific routines
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <mach/neponset.h>
+#include <asm/hardware/sa1111.h>
+
+#include "sa1111_generic.h"
+
+/*
+ * Neponset uses the Maxim MAX1600, with the following connections:
+ *
+ * MAX1600 Neponset
+ *
+ * A0VCC SA-1111 GPIO A<1>
+ * A1VCC SA-1111 GPIO A<0>
+ * A0VPP CPLD NCR A0VPP
+ * A1VPP CPLD NCR A1VPP
+ * B0VCC SA-1111 GPIO A<2>
+ * B1VCC SA-1111 GPIO A<3>
+ * B0VPP ground (slot B is CF)
+ * B1VPP ground (slot B is CF)
+ *
+ * VX VCC (5V)
+ * VY VCC3_3 (3.3V)
+ * 12INA 12V
+ * 12INB ground (slot B is CF)
+ *
+ * The MAX1600 CODE pin is tied to ground, placing the device in
+ * "Standard Intel code" mode. Refer to the Maxim data sheet for
+ * the corresponding truth table.
+ */
+
+static int
+neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
+{
+ struct sa1111_pcmcia_socket *s = to_skt(skt);
+ unsigned int ncr_mask, ncr_set, pa_dwr_mask, pa_dwr_set;
+ int ret;
+
+ switch (skt->nr) {
+ case 0:
+ pa_dwr_mask = GPIO_A0 | GPIO_A1;
+ ncr_mask = NCR_A0VPP | NCR_A1VPP;
+
+ if (state->Vpp == 0)
+ ncr_set = 0;
+ else if (state->Vpp == 120)
+ ncr_set = NCR_A1VPP;
+ else if (state->Vpp == state->Vcc)
+ ncr_set = NCR_A0VPP;
+ else {
+ printk(KERN_ERR "%s(): unrecognized VPP %u\n",
+ __func__, state->Vpp);
+ return -1;
+ }
+ break;
+
+ case 1:
+ pa_dwr_mask = GPIO_A2 | GPIO_A3;
+ ncr_mask = 0;
+ ncr_set = 0;
+
+ if (state->Vpp != state->Vcc && state->Vpp != 0) {
+ printk(KERN_ERR "%s(): CF slot cannot support VPP %u\n",
+ __func__, state->Vpp);
+ return -1;
+ }
+ break;
+
+ default:
+ return -1;
+ }
+
+ /*
+ * pa_dwr_set is the mask for selecting Vcc on both sockets.
+ * pa_dwr_mask selects which bits (and therefore socket) we change.
+ */
+ switch (state->Vcc) {
+ default:
+ case 0: pa_dwr_set = 0; break;
+ case 33: pa_dwr_set = GPIO_A1|GPIO_A2; break;
+ case 50: pa_dwr_set = GPIO_A0|GPIO_A3; break;
+ }
+
+ ret = sa1111_pcmcia_configure_socket(skt, state);
+ if (ret == 0) {
+ unsigned long flags;
+
+ local_irq_save(flags);
+ NCR_0 = (NCR_0 & ~ncr_mask) | ncr_set;
+
+ local_irq_restore(flags);
+ sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
+ }
+
+ return ret;
+}
+
+static struct pcmcia_low_level neponset_pcmcia_ops = {
+ .owner = THIS_MODULE,
+ .configure_socket = neponset_pcmcia_configure_socket,
+ .first = 0,
+ .nr = 2,
+};
+
+int pcmcia_neponset_init(struct sa1111_dev *sadev)
+{
+ int ret = -ENODEV;
+
+ if (machine_is_assabet()) {
+ /*
+ * Set GPIO_A<3:0> to be outputs for the MAX1600,
+ * and switch to standby mode.
+ */
+ sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
+ sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
+ sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
+ sa11xx_drv_pcmcia_ops(&neponset_pcmcia_ops);
+ ret = sa1111_pcmcia_add(sadev, &neponset_pcmcia_ops,
+ sa11xx_drv_pcmcia_add_one);
+ }
+
+ return ret;
+}
--
1.7.4.4
More information about the linux-arm-kernel
mailing list