[PATCH 03/19] PCMCIA: pxa: convert PXA socket drivers to use new irq/gpio management
Russell King - ARM Linux
linux at arm.linux.org.uk
Fri Jan 20 05:18:10 EST 2012
Convert all the PXA platform socket drivers to use the new irq/gpio
management provided by soc_common. This relieves these drivers from
having to do anything with these GPIOs other than provide the numbers
to soc_common.
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
arch/arm/mach-pxa/include/mach/balloon3.h | 1 -
drivers/pcmcia/pxa2xx_balloon3.c | 21 ++-------
drivers/pcmcia/pxa2xx_cm_x255.c | 38 +++++-----------
drivers/pcmcia/pxa2xx_cm_x270.c | 22 ++-------
drivers/pcmcia/pxa2xx_colibri.c | 20 +-------
drivers/pcmcia/pxa2xx_e740.c | 70 +++++------------------------
drivers/pcmcia/pxa2xx_mainstone.c | 30 ++++++-------
drivers/pcmcia/pxa2xx_palmld.c | 7 +--
drivers/pcmcia/pxa2xx_palmtc.c | 7 +--
drivers/pcmcia/pxa2xx_palmtx.c | 7 +--
drivers/pcmcia/pxa2xx_sharpsl.c | 30 +-----------
drivers/pcmcia/pxa2xx_stargate2.c | 33 ++-----------
drivers/pcmcia/pxa2xx_trizeps4.c | 61 +++----------------------
drivers/pcmcia/pxa2xx_viper.c | 38 +++-------------
drivers/pcmcia/pxa2xx_vpac270.c | 53 +++------------------
15 files changed, 82 insertions(+), 356 deletions(-)
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index f02fa1e..954641e 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -174,7 +174,6 @@ enum balloon3_features {
#define BALLOON3_AUX_NIRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_AUX_NIRQ)
#define BALLOON3_CODEC_IRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ)
-#define BALLOON3_S0_CD_IRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_S0_CD)
#define BALLOON3_NR_IRQS (IRQ_BOARD_START + 16)
diff --git a/drivers/pcmcia/pxa2xx_balloon3.c b/drivers/pcmcia/pxa2xx_balloon3.c
index 22a75e6..12e38b4 100644
--- a/drivers/pcmcia/pxa2xx_balloon3.c
+++ b/drivers/pcmcia/pxa2xx_balloon3.c
@@ -29,15 +29,6 @@
#include "soc_common.h"
-/*
- * These are a list of interrupt sources that provokes a polled
- * check of status
- */
-static struct pcmcia_irqs irqs[] = {
- { 0, BALLOON3_S0_CD_IRQ, "PCMCIA0 CD" },
- { 0, BALLOON3_BP_NSTSCHG_IRQ, "PCMCIA0 STSCHG" },
-};
-
static int balloon3_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
uint16_t ver;
@@ -49,12 +40,12 @@ static int balloon3_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
ver);
skt->socket.pci_irq = BALLOON3_BP_CF_NRDY_IRQ;
- return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
-}
+ skt->stat[SOC_STAT_CD].gpio = BALLOON3_GPIO_S0_CD;
+ skt->stat[SOC_STAT_CD].name = "PCMCIA0 CD";
+ skt->stat[SOC_STAT_BVD1].irq = BALLOON3_BP_NSTSCHG_IRQ;
+ skt->stat[SOC_STAT_BVD1].name = "PCMCIA0 STSCHG";
-static void balloon3_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
- soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ return 0;
}
static unsigned long balloon3_pcmcia_status[2] = {
@@ -85,7 +76,6 @@ static void balloon3_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
disable_irq(BALLOON3_BP_NSTSCHG_IRQ);
}
- state->detect = !gpio_get_value(BALLOON3_GPIO_S0_CD);
state->ready = !!(status & BALLOON3_CF_nIRQ);
state->bvd1 = !!(status & BALLOON3_CF_nSTSCHG_BVD1);
state->bvd2 = 0; /* not available */
@@ -106,7 +96,6 @@ static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
static struct pcmcia_low_level balloon3_pcmcia_ops = {
.owner = THIS_MODULE,
.hw_init = balloon3_pcmcia_hw_init,
- .hw_shutdown = balloon3_pcmcia_hw_shutdown,
.socket_state = balloon3_pcmcia_socket_state,
.configure_socket = balloon3_pcmcia_configure_socket,
.first = 0,
diff --git a/drivers/pcmcia/pxa2xx_cm_x255.c b/drivers/pcmcia/pxa2xx_cm_x255.c
index 31ab6ddf..f90e7b1 100644
--- a/drivers/pcmcia/pxa2xx_cm_x255.c
+++ b/drivers/pcmcia/pxa2xx_cm_x255.c
@@ -25,17 +25,6 @@
#define GPIO_PCMCIA_S1_RDYINT (8)
#define GPIO_PCMCIA_RESET (9)
-#define PCMCIA_S0_CD_VALID gpio_to_irq(GPIO_PCMCIA_S0_CD_VALID)
-#define PCMCIA_S1_CD_VALID gpio_to_irq(GPIO_PCMCIA_S1_CD_VALID)
-#define PCMCIA_S0_RDYINT gpio_to_irq(GPIO_PCMCIA_S0_RDYINT)
-#define PCMCIA_S1_RDYINT gpio_to_irq(GPIO_PCMCIA_S1_RDYINT)
-
-
-static struct pcmcia_irqs irqs[] = {
- { .sock = 0, .str = "PCMCIA0 CD" },
- { .sock = 1, .str = "PCMCIA1 CD" },
-};
-
static int cmx255_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
int ret = gpio_request(GPIO_PCMCIA_RESET, "PCCard reset");
@@ -43,19 +32,23 @@ static int cmx255_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
return ret;
gpio_direction_output(GPIO_PCMCIA_RESET, 0);
- skt->socket.pci_irq = skt->nr == 0 ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
- irqs[0].irq = PCMCIA_S0_CD_VALID;
- irqs[1].irq = PCMCIA_S1_CD_VALID;
- ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
- if (!ret)
- gpio_free(GPIO_PCMCIA_RESET);
+ if (skt->nr == 0) {
+ skt->stat[SOC_STAT_CD].gpio = GPIO_PCMCIA_S0_CD_VALID;
+ skt->stat[SOC_STAT_CD].name = "PCMCIA0 CD";
+ skt->stat[SOC_STAT_RDY].gpio = GPIO_PCMCIA_S0_RDYINT;
+ skt->stat[SOC_STAT_RDY].name = "PCMCIA0 RDY";
+ } else {
+ skt->stat[SOC_STAT_CD].gpio = GPIO_PCMCIA_S1_CD_VALID;
+ skt->stat[SOC_STAT_CD].name = "PCMCIA1 CD";
+ skt->stat[SOC_STAT_RDY].gpio = GPIO_PCMCIA_S1_RDYINT;
+ skt->stat[SOC_STAT_RDY].name = "PCMCIA1 RDY";
+ }
- return ret;
+ return 0;
}
static void cmx255_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
{
- soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
gpio_free(GPIO_PCMCIA_RESET);
}
@@ -63,13 +56,6 @@ static void cmx255_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
static void cmx255_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
- int cd = skt->nr ? GPIO_PCMCIA_S1_CD_VALID : GPIO_PCMCIA_S0_CD_VALID;
- int rdy = skt->nr ? GPIO_PCMCIA_S1_RDYINT : GPIO_PCMCIA_S0_RDYINT;
-
- state->detect = !gpio_get_value(cd);
- state->ready = !!gpio_get_value(rdy);
- state->bvd1 = 1;
- state->bvd2 = 1;
state->vs_3v = 0;
state->vs_Xv = 0;
state->wrprot = 0; /* not available */
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index 3dc7621..efb5f13 100644
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -22,14 +22,6 @@
#define GPIO_PCMCIA_S0_RDYINT (82)
#define GPIO_PCMCIA_RESET (53)
-#define PCMCIA_S0_CD_VALID gpio_to_irq(GPIO_PCMCIA_S0_CD_VALID)
-#define PCMCIA_S0_RDYINT gpio_to_irq(GPIO_PCMCIA_S0_RDYINT)
-
-
-static struct pcmcia_irqs irqs[] = {
- { .sock = 0, .str = "PCMCIA0 CD" },
-};
-
static int cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
int ret = gpio_request(GPIO_PCMCIA_RESET, "PCCard reset");
@@ -37,18 +29,16 @@ static int cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
return ret;
gpio_direction_output(GPIO_PCMCIA_RESET, 0);
- skt->socket.pci_irq = PCMCIA_S0_RDYINT;
- irqs[0].irq = PCMCIA_S0_CD_VALID;
- ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
- if (!ret)
- gpio_free(GPIO_PCMCIA_RESET);
+ skt->stat[SOC_STAT_CD].gpio = GPIO_PCMCIA_S0_CD_VALID;
+ skt->stat[SOC_STAT_CD].name = "PCMCIA0 CD";
+ skt->stat[SOC_STAT_RDY].gpio = GPIO_PCMCIA_S0_RDYINT;
+ skt->stat[SOC_STAT_RDY].name = "PCMCIA0 RDY";
return ret;
}
static void cmx270_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
{
- soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
gpio_free(GPIO_PCMCIA_RESET);
}
@@ -56,10 +46,6 @@ static void cmx270_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
- state->detect = (gpio_get_value(GPIO_PCMCIA_S0_CD_VALID) == 0) ? 1 : 0;
- state->ready = (gpio_get_value(GPIO_PCMCIA_S0_RDYINT) == 0) ? 0 : 1;
- state->bvd1 = 1;
- state->bvd2 = 1;
state->vs_3v = 0;
state->vs_Xv = 0;
state->wrprot = 0; /* not available */
diff --git a/drivers/pcmcia/pxa2xx_colibri.c b/drivers/pcmcia/pxa2xx_colibri.c
index c6dec57..3565169 100644
--- a/drivers/pcmcia/pxa2xx_colibri.c
+++ b/drivers/pcmcia/pxa2xx_colibri.c
@@ -53,13 +53,6 @@ static struct gpio colibri_pcmcia_gpios[] = {
{ 0, GPIOF_INIT_HIGH,"PCMCIA Reset" },
};
-static struct pcmcia_irqs colibri_irqs[] = {
- {
- .sock = 0,
- .str = "PCMCIA CD"
- },
-};
-
static int colibri_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
int ret;
@@ -69,19 +62,10 @@ static int colibri_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
if (ret)
goto err1;
- colibri_irqs[0].irq = gpio_to_irq(colibri_pcmcia_gpios[DETECT].gpio);
skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpios[READY].gpio);
+ skt->stat[SOC_STAT_CD].irq = gpio_to_irq(colibri_pcmcia_gpios[DETECT].gpio);
+ skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
- ret = soc_pcmcia_request_irqs(skt, colibri_irqs,
- ARRAY_SIZE(colibri_irqs));
- if (ret)
- goto err2;
-
- return ret;
-
-err2:
- gpio_free_array(colibri_pcmcia_gpios,
- ARRAY_SIZE(colibri_pcmcia_gpios));
err1:
return ret;
}
diff --git a/drivers/pcmcia/pxa2xx_e740.c b/drivers/pcmcia/pxa2xx_e740.c
index 17cd2ce..24e00a5 100644
--- a/drivers/pcmcia/pxa2xx_e740.c
+++ b/drivers/pcmcia/pxa2xx_e740.c
@@ -23,52 +23,27 @@
#include "soc_common.h"
-static struct pcmcia_irqs cd_irqs[] = {
- {
- .sock = 0,
- .str = "CF card detect"
- },
- {
- .sock = 1,
- .str = "Wifi switch"
- },
-};
-
static int e740_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
- if (skt->nr == 0)
- skt->socket.pci_irq = gpio_to_irq(GPIO_E740_PCMCIA_RDY0);
- else
- skt->socket.pci_irq = gpio_to_irq(GPIO_E740_PCMCIA_RDY1);
-
- cd_irqs[0].irq = gpio_to_irq(GPIO_E740_PCMCIA_CD0);
- cd_irqs[1].irq = gpio_to_irq(GPIO_E740_PCMCIA_CD1);
-
- return soc_pcmcia_request_irqs(skt, &cd_irqs[skt->nr], 1);
-}
+ if (skt->nr == 0) {
+ skt->stat[SOC_STAT_CD].gpio = GPIO_E740_PCMCIA_CD0;
+ skt->stat[SOC_STAT_CD].name = "CF card detect";
+ skt->stat[SOC_STAT_RDY].gpio = GPIO_E740_PCMCIA_RDY0;
+ skt->stat[SOC_STAT_RDY].name = "CF ready";
+ } else {
+ skt->stat[SOC_STAT_CD].gpio = GPIO_E740_PCMCIA_CD1;
+ skt->stat[SOC_STAT_CD].name = "Wifi switch";
+ skt->stat[SOC_STAT_RDY].gpio = GPIO_E740_PCMCIA_RDY1;
+ skt->stat[SOC_STAT_RDY].name = "Wifi ready";
+ }
-/*
- * Release all resources.
- */
-static void e740_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
- soc_pcmcia_free_irqs(skt, &cd_irqs[skt->nr], 1);
+ return 0;
}
static void e740_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
- if (skt->nr == 0) {
- state->detect = gpio_get_value(GPIO_E740_PCMCIA_CD0) ? 0 : 1;
- state->ready = gpio_get_value(GPIO_E740_PCMCIA_RDY0) ? 1 : 0;
- } else {
- state->detect = gpio_get_value(GPIO_E740_PCMCIA_CD1) ? 0 : 1;
- state->ready = gpio_get_value(GPIO_E740_PCMCIA_RDY1) ? 1 : 0;
- }
-
state->vs_3v = 1;
- state->bvd1 = 1;
- state->bvd2 = 1;
state->wrprot = 0;
state->vs_Xv = 0;
}
@@ -109,32 +84,11 @@ static int e740_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
return 0;
}
-/*
- * Enable card status IRQs on (re-)initialisation. This can
- * be called at initialisation, power management event, or
- * pcmcia event.
- */
-static void e740_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
-{
- soc_pcmcia_enable_irqs(skt, cd_irqs, ARRAY_SIZE(cd_irqs));
-}
-
-/*
- * Disable card status IRQs on suspend.
- */
-static void e740_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
-{
- soc_pcmcia_disable_irqs(skt, cd_irqs, ARRAY_SIZE(cd_irqs));
-}
-
static struct pcmcia_low_level e740_pcmcia_ops = {
.owner = THIS_MODULE,
.hw_init = e740_pcmcia_hw_init,
- .hw_shutdown = e740_pcmcia_hw_shutdown,
.socket_state = e740_pcmcia_socket_state,
.configure_socket = e740_pcmcia_configure_socket,
- .socket_init = e740_pcmcia_socket_init,
- .socket_suspend = e740_pcmcia_socket_suspend,
.nr = 2,
};
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
index aded706c..b0ea4d3 100644
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ b/drivers/pcmcia/pxa2xx_mainstone.c
@@ -30,27 +30,26 @@
#include "soc_common.h"
-static struct pcmcia_irqs irqs[] = {
- { 0, MAINSTONE_S0_CD_IRQ, "PCMCIA0 CD" },
- { 1, MAINSTONE_S1_CD_IRQ, "PCMCIA1 CD" },
- { 0, MAINSTONE_S0_STSCHG_IRQ, "PCMCIA0 STSCHG" },
- { 1, MAINSTONE_S1_STSCHG_IRQ, "PCMCIA1 STSCHG" },
-};
-
static int mst_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
/*
* Setup default state of GPIO outputs
* before we enable them as outputs.
*/
-
- skt->socket.pci_irq = (skt->nr == 0) ? MAINSTONE_S0_IRQ : MAINSTONE_S1_IRQ;
- return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
-}
-
-static void mst_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
- soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ if (skt->nr == 0) {
+ skt->socket.pci_irq = MAINSTONE_S0_IRQ;
+ skt->stat[SOC_STAT_CD].irq = MAINSTONE_S0_CD_IRQ;
+ skt->stat[SOC_STAT_CD].name = "PCMCIA0 CD";
+ skt->stat[SOC_STAT_BVD1].irq = MAINSTONE_S0_STSCHG_IRQ;
+ skt->stat[SOC_STAT_BVD1].name = "PCMCIA0 STSCHG";
+ } else {
+ skt->socket.pci_irq = MAINSTONE_S1_IRQ;
+ skt->stat[SOC_STAT_CD].irq = MAINSTONE_S1_CD_IRQ;
+ skt->stat[SOC_STAT_CD].name = "PCMCIA1 CD";
+ skt->stat[SOC_STAT_BVD1].irq = MAINSTONE_S1_STSCHG_IRQ;
+ skt->stat[SOC_STAT_BVD1].name = "PCMCIA1 STSCHG";
+ }
+ return 0;
}
static unsigned long mst_pcmcia_status[2];
@@ -131,7 +130,6 @@ static int mst_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
static struct pcmcia_low_level mst_pcmcia_ops __initdata = {
.owner = THIS_MODULE,
.hw_init = mst_pcmcia_hw_init,
- .hw_shutdown = mst_pcmcia_hw_shutdown,
.socket_state = mst_pcmcia_socket_state,
.configure_socket = mst_pcmcia_configure_socket,
.nr = 2,
diff --git a/drivers/pcmcia/pxa2xx_palmld.c b/drivers/pcmcia/pxa2xx_palmld.c
index 6a8e011..4bf6814 100644
--- a/drivers/pcmcia/pxa2xx_palmld.c
+++ b/drivers/pcmcia/pxa2xx_palmld.c
@@ -23,7 +23,6 @@
static struct gpio palmld_pcmcia_gpios[] = {
{ GPIO_NR_PALMLD_PCMCIA_POWER, GPIOF_INIT_LOW, "PCMCIA Power" },
{ GPIO_NR_PALMLD_PCMCIA_RESET, GPIOF_INIT_HIGH,"PCMCIA Reset" },
- { GPIO_NR_PALMLD_PCMCIA_READY, GPIOF_IN, "PCMCIA Ready" },
};
static int palmld_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
@@ -33,7 +32,8 @@ static int palmld_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
ret = gpio_request_array(palmld_pcmcia_gpios,
ARRAY_SIZE(palmld_pcmcia_gpios));
- skt->socket.pci_irq = gpio_to_irq(GPIO_NR_PALMLD_PCMCIA_READY);
+ skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMLD_PCMCIA_READY;
+ skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
return ret;
}
@@ -47,9 +47,6 @@ static void palmld_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
state->detect = 1; /* always inserted */
- state->ready = !!gpio_get_value(GPIO_NR_PALMLD_PCMCIA_READY);
- state->bvd1 = 1;
- state->bvd2 = 1;
state->wrprot = 0;
state->vs_3v = 1;
state->vs_Xv = 0;
diff --git a/drivers/pcmcia/pxa2xx_palmtc.c b/drivers/pcmcia/pxa2xx_palmtc.c
index 9e38de7..b32d05f 100644
--- a/drivers/pcmcia/pxa2xx_palmtc.c
+++ b/drivers/pcmcia/pxa2xx_palmtc.c
@@ -26,7 +26,6 @@ static struct gpio palmtc_pcmcia_gpios[] = {
{ GPIO_NR_PALMTC_PCMCIA_POWER2, GPIOF_INIT_LOW, "PCMCIA Power 2" },
{ GPIO_NR_PALMTC_PCMCIA_POWER3, GPIOF_INIT_LOW, "PCMCIA Power 3" },
{ GPIO_NR_PALMTC_PCMCIA_RESET, GPIOF_INIT_HIGH,"PCMCIA Reset" },
- { GPIO_NR_PALMTC_PCMCIA_READY, GPIOF_IN, "PCMCIA Ready" },
{ GPIO_NR_PALMTC_PCMCIA_PWRREADY, GPIOF_IN, "PCMCIA Power Ready" },
};
@@ -37,7 +36,8 @@ static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
ret = gpio_request_array(palmtc_pcmcia_gpios,
ARRAY_SIZE(palmtc_pcmcia_gpios));
- skt->socket.pci_irq = gpio_to_irq(GPIO_NR_PALMTC_PCMCIA_READY);
+ skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMTC_PCMCIA_READY;
+ skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
return ret;
}
@@ -51,9 +51,6 @@ static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
state->detect = 1; /* always inserted */
- state->ready = !!gpio_get_value(GPIO_NR_PALMTC_PCMCIA_READY);
- state->bvd1 = 1;
- state->bvd2 = 1;
state->wrprot = 0;
state->vs_3v = 1;
state->vs_Xv = 0;
diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c
index 80645a6..ee024ff 100644
--- a/drivers/pcmcia/pxa2xx_palmtx.c
+++ b/drivers/pcmcia/pxa2xx_palmtx.c
@@ -23,7 +23,6 @@ static struct gpio palmtx_pcmcia_gpios[] = {
{ GPIO_NR_PALMTX_PCMCIA_POWER1, GPIOF_INIT_LOW, "PCMCIA Power 1" },
{ GPIO_NR_PALMTX_PCMCIA_POWER2, GPIOF_INIT_LOW, "PCMCIA Power 2" },
{ GPIO_NR_PALMTX_PCMCIA_RESET, GPIOF_INIT_HIGH,"PCMCIA Reset" },
- { GPIO_NR_PALMTX_PCMCIA_READY, GPIOF_IN, "PCMCIA Ready" },
};
static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
@@ -33,7 +32,8 @@ static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
ret = gpio_request_array(palmtx_pcmcia_gpios,
ARRAY_SIZE(palmtx_pcmcia_gpios));
- skt->socket.pci_irq = gpio_to_irq(GPIO_NR_PALMTX_PCMCIA_READY);
+ skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMTX_PCMCIA_READY;
+ skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
return ret;
}
@@ -47,9 +47,6 @@ static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
state->detect = 1; /* always inserted */
- state->ready = !!gpio_get_value(GPIO_NR_PALMTX_PCMCIA_READY);
- state->bvd1 = 1;
- state->bvd2 = 1;
state->wrprot = 0;
state->vs_3v = 1;
state->vs_Xv = 0;
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index 69ae2fd..b066273 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -46,21 +46,9 @@ static void sharpsl_pcmcia_init_reset(struct soc_pcmcia_socket *skt)
static int sharpsl_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
- int ret;
-
- /* Register interrupts */
if (SCOOP_DEV[skt->nr].cd_irq >= 0) {
- struct pcmcia_irqs cd_irq;
-
- cd_irq.sock = skt->nr;
- cd_irq.irq = SCOOP_DEV[skt->nr].cd_irq;
- cd_irq.str = SCOOP_DEV[skt->nr].cd_irq_str;
- ret = soc_pcmcia_request_irqs(skt, &cd_irq, 1);
-
- if (ret) {
- printk(KERN_ERR "Request for Compact Flash IRQ failed\n");
- return ret;
- }
+ skt->stat[SOC_STAT_CD].irq = SCOOP_DEV[skt->nr].cd_irq;
+ skt->stat[SOC_STAT_CD].name = SCOOP_DEV[skt->nr].cd_irq_str;
}
skt->socket.pci_irq = SCOOP_DEV[skt->nr].irq;
@@ -68,19 +56,6 @@ static int sharpsl_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
return 0;
}
-static void sharpsl_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
- if (SCOOP_DEV[skt->nr].cd_irq >= 0) {
- struct pcmcia_irqs cd_irq;
-
- cd_irq.sock = skt->nr;
- cd_irq.irq = SCOOP_DEV[skt->nr].cd_irq;
- cd_irq.str = SCOOP_DEV[skt->nr].cd_irq_str;
- soc_pcmcia_free_irqs(skt, &cd_irq, 1);
- }
-}
-
-
static void sharpsl_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
@@ -222,7 +197,6 @@ static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
static struct pcmcia_low_level sharpsl_pcmcia_ops __initdata = {
.owner = THIS_MODULE,
.hw_init = sharpsl_pcmcia_hw_init,
- .hw_shutdown = sharpsl_pcmcia_hw_shutdown,
.socket_state = sharpsl_pcmcia_socket_state,
.configure_socket = sharpsl_pcmcia_configure_socket,
.socket_init = sharpsl_pcmcia_socket_init,
diff --git a/drivers/pcmcia/pxa2xx_stargate2.c b/drivers/pcmcia/pxa2xx_stargate2.c
index 6c2366b..e7c7eb5 100644
--- a/drivers/pcmcia/pxa2xx_stargate2.c
+++ b/drivers/pcmcia/pxa2xx_stargate2.c
@@ -33,10 +33,6 @@
#define SG2_S0_GPIO_DETECT 53
#define SG2_S0_GPIO_READY 81
-static struct pcmcia_irqs irqs[] = {
- {.sock = 0, .str = "PCMCIA0 CD" },
-};
-
static struct gpio sg2_pcmcia_gpios[] = {
{ SG2_S0_GPIO_RESET, GPIOF_OUT_INIT_HIGH, "PCMCIA Reset" },
{ SG2_S0_POWER_CTL, GPIOF_OUT_INIT_HIGH, "PCMCIA Power Ctrl" },
@@ -44,22 +40,16 @@ static struct gpio sg2_pcmcia_gpios[] = {
static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
- skt->socket.pci_irq = gpio_to_irq(SG2_S0_GPIO_READY);
- irqs[0].irq = gpio_to_irq(SG2_S0_GPIO_DETECT);
-
- return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
-}
-
-static void sg2_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
- soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ skt->stat[SOC_STAT_CD].gpio = SG2_S0_GPIO_DETECT;
+ skt->stat[SOC_STAT_CD].name = "PCMCIA0 CD";
+ skt->stat[SOC_STAT_RDY].gpio = SG2_S0_GPIO_READY;
+ skt->stat[SOC_STAT_RDY].name = "PCMCIA0 RDY";
+ return 0;
}
static void sg2_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
- state->detect = !gpio_get_value(SG2_S0_GPIO_DETECT);
- state->ready = !!gpio_get_value(SG2_S0_GPIO_READY);
state->bvd1 = 0; /* not available - battery detect on card */
state->bvd2 = 0; /* not available */
state->vs_3v = 1; /* not available - voltage detect for card */
@@ -94,24 +84,11 @@ static int sg2_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
return 0;
}
-static void sg2_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
-{
- soc_pcmcia_enable_irqs(skt, irqs, ARRAY_SIZE(irqs));
-}
-
-static void sg2_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
-{
- soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs));
-}
-
static struct pcmcia_low_level sg2_pcmcia_ops __initdata = {
.owner = THIS_MODULE,
.hw_init = sg2_pcmcia_hw_init,
- .hw_shutdown = sg2_pcmcia_hw_shutdown,
.socket_state = sg2_pcmcia_socket_state,
.configure_socket = sg2_pcmcia_configure_socket,
- .socket_init = sg2_pcmcia_socket_init,
- .socket_suspend = sg2_pcmcia_socket_suspend,
.nr = 1,
};
diff --git a/drivers/pcmcia/pxa2xx_trizeps4.c b/drivers/pcmcia/pxa2xx_trizeps4.c
index 7c33f89..aeda98e 100644
--- a/drivers/pcmcia/pxa2xx_trizeps4.c
+++ b/drivers/pcmcia/pxa2xx_trizeps4.c
@@ -29,32 +29,18 @@
extern void board_pcmcia_power(int power);
-static struct pcmcia_irqs irqs[] = {
- { .sock = 0, .str = "cs0_cd" }
- /* on other baseboards we can have more inputs */
-};
-
static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
- int ret, i;
/* we dont have voltage/card/ready detection
* so we dont need interrupts for it
*/
switch (skt->nr) {
case 0:
- if (gpio_request(GPIO_PRDY, "cf_irq") < 0) {
- pr_err("%s: sock %d unable to request gpio %d\n", __func__,
- skt->nr, GPIO_PRDY);
- return -EBUSY;
- }
- if (gpio_direction_input(GPIO_PRDY) < 0) {
- pr_err("%s: sock %d unable to set input gpio %d\n", __func__,
- skt->nr, GPIO_PRDY);
- gpio_free(GPIO_PRDY);
- return -EINVAL;
- }
- skt->socket.pci_irq = gpio_to_irq(GPIO_PRDY);
- irqs[0].irq = gpio_to_irq(GPIO_PCD);
+ skt->socket.pci_irq = IRQ_GPIO(GPIO_PRDY);
+ skt->stat[SOC_STAT_CD].gpio = GPIO_PCD;
+ skt->stat[SOC_STAT_CD].name = "cs0_cd";
+ skt->stat[SOC_STAT_RDY].gpio = GPIO_PRDY;
+ skt->stat[SOC_STAT_RDY].name = "cs0_rdy";
break;
default:
break;
@@ -62,39 +48,7 @@ static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
/* release the reset of this card */
pr_debug("%s: sock %d irq %d\n", __func__, skt->nr, skt->socket.pci_irq);
- /* supplementory irqs for the socket */
- for (i = 0; i < ARRAY_SIZE(irqs); i++) {
- if (irqs[i].sock != skt->nr)
- continue;
- if (gpio_request(irq_to_gpio(irqs[i].irq), irqs[i].str) < 0) {
- pr_err("%s: sock %d unable to request gpio %d\n",
- __func__, skt->nr, irq_to_gpio(irqs[i].irq));
- ret = -EBUSY;
- goto error;
- }
- if (gpio_direction_input(irq_to_gpio(irqs[i].irq)) < 0) {
- pr_err("%s: sock %d unable to set input gpio %d\n",
- __func__, skt->nr, irq_to_gpio(irqs[i].irq));
- ret = -EINVAL;
- goto error;
- }
- }
- return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
-
-error:
- for (; i >= 0; i--) {
- gpio_free(irq_to_gpio(irqs[i].irq));
- }
- return (ret);
-}
-
-static void trizeps_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
- int i;
- /* free allocated gpio's */
- gpio_free(GPIO_PRDY);
- for (i = 0; i < ARRAY_SIZE(irqs); i++)
- gpio_free(irq_to_gpio(irqs[i].irq));
+ return 0;
}
static unsigned long trizeps_pcmcia_status[2];
@@ -118,8 +72,6 @@ static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
switch (skt->nr) {
case 0:
/* just fill in fix states */
- state->detect = gpio_get_value(GPIO_PCD) ? 0 : 1;
- state->ready = gpio_get_value(GPIO_PRDY) ? 1 : 0;
state->bvd1 = (status & ConXS_CFSR_BVD1) ? 1 : 0;
state->bvd2 = (status & ConXS_CFSR_BVD2) ? 1 : 0;
state->vs_3v = (status & ConXS_CFSR_VS1) ? 0 : 1;
@@ -204,7 +156,6 @@ static void trizeps_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
static struct pcmcia_low_level trizeps_pcmcia_ops = {
.owner = THIS_MODULE,
.hw_init = trizeps_pcmcia_hw_init,
- .hw_shutdown = trizeps_pcmcia_hw_shutdown,
.socket_state = trizeps_pcmcia_socket_state,
.configure_socket = trizeps_pcmcia_configure_socket,
.socket_init = trizeps_pcmcia_socket_init,
diff --git a/drivers/pcmcia/pxa2xx_viper.c b/drivers/pcmcia/pxa2xx_viper.c
index 1064b1c..6100ef8 100644
--- a/drivers/pcmcia/pxa2xx_viper.c
+++ b/drivers/pcmcia/pxa2xx_viper.c
@@ -32,13 +32,6 @@
static struct platform_device *arcom_pcmcia_dev;
-static struct pcmcia_irqs irqs[] = {
- {
- .sock = 0,
- .str = "PCMCIA_CD",
- },
-};
-
static inline struct arcom_pcmcia_pdata *viper_get_pdata(void)
{
return arcom_pcmcia_dev->dev.platform_data;
@@ -49,38 +42,28 @@ static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
unsigned long flags;
- skt->socket.pci_irq = gpio_to_irq(pdata->rdy_gpio);
- irqs[0].irq = gpio_to_irq(pdata->cd_gpio);
-
- if (gpio_request(pdata->cd_gpio, "CF detect"))
- goto err_request_cd;
-
- if (gpio_request(pdata->rdy_gpio, "CF ready"))
- goto err_request_rdy;
+ skt->stat[SOC_STAT_CD].gpio = pdata->cd_gpio;
+ skt->stat[SOC_STAT_CD].name = "PCMCIA_CD";
+ skt->stat[SOC_STAT_RDY].gpio = pdata->rdy_gpio;
+ skt->stat[SOC_STAT_RDY].name = "CF ready";
if (gpio_request(pdata->pwr_gpio, "CF power"))
goto err_request_pwr;
local_irq_save(flags);
- if (gpio_direction_output(pdata->pwr_gpio, 0) ||
- gpio_direction_input(pdata->cd_gpio) ||
- gpio_direction_input(pdata->rdy_gpio)) {
+ if (gpio_direction_output(pdata->pwr_gpio, 0)) {
local_irq_restore(flags);
goto err_dir;
}
local_irq_restore(flags);
- return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ return 0;
err_dir:
gpio_free(pdata->pwr_gpio);
err_request_pwr:
- gpio_free(pdata->rdy_gpio);
-err_request_rdy:
- gpio_free(pdata->cd_gpio);
-err_request_cd:
dev_err(&arcom_pcmcia_dev->dev, "Failed to setup PCMCIA GPIOs\n");
return -1;
}
@@ -92,21 +75,12 @@ static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
- soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
gpio_free(pdata->pwr_gpio);
- gpio_free(pdata->rdy_gpio);
- gpio_free(pdata->cd_gpio);
}
static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
- struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
-
- state->detect = !gpio_get_value(pdata->cd_gpio);
- state->ready = !!gpio_get_value(pdata->rdy_gpio);
- state->bvd1 = 1;
- state->bvd2 = 1;
state->wrprot = 0;
state->vs_3v = 1; /* Can only apply 3.3V */
state->vs_Xv = 0;
diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c
index 61b17d2..cf07d88 100644
--- a/drivers/pcmcia/pxa2xx_vpac270.c
+++ b/drivers/pcmcia/pxa2xx_vpac270.c
@@ -23,29 +23,14 @@
#include "soc_common.h"
static struct gpio vpac270_pcmcia_gpios[] = {
- { GPIO84_VPAC270_PCMCIA_CD, GPIOF_IN, "PCMCIA Card Detect" },
- { GPIO35_VPAC270_PCMCIA_RDY, GPIOF_IN, "PCMCIA Ready" },
{ GPIO107_VPAC270_PCMCIA_PPEN, GPIOF_INIT_LOW, "PCMCIA PPEN" },
{ GPIO11_VPAC270_PCMCIA_RESET, GPIOF_INIT_LOW, "PCMCIA Reset" },
};
static struct gpio vpac270_cf_gpios[] = {
- { GPIO17_VPAC270_CF_CD, GPIOF_IN, "CF Card Detect" },
- { GPIO12_VPAC270_CF_RDY, GPIOF_IN, "CF Ready" },
{ GPIO16_VPAC270_CF_RESET, GPIOF_INIT_LOW, "CF Reset" },
};
-static struct pcmcia_irqs cd_irqs[] = {
- {
- .sock = 0,
- .str = "PCMCIA CD"
- },
- {
- .sock = 1,
- .str = "CF CD"
- },
-};
-
static int vpac270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
int ret;
@@ -54,20 +39,18 @@ static int vpac270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
ret = gpio_request_array(vpac270_pcmcia_gpios,
ARRAY_SIZE(vpac270_pcmcia_gpios));
- skt->socket.pci_irq = gpio_to_irq(GPIO35_VPAC270_PCMCIA_RDY);
- cd_irqs[0].irq = gpio_to_irq(GPIO84_VPAC270_PCMCIA_CD);
-
- if (!ret)
- ret = soc_pcmcia_request_irqs(skt, &cd_irqs[0], 1);
+ skt->stat[SOC_STAT_CD].gpio = GPIO84_VPAC270_PCMCIA_CD;
+ skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
+ skt->stat[SOC_STAT_RDY].gpio = GPIO35_VPAC270_PCMCIA_RDY;
+ skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
} else {
ret = gpio_request_array(vpac270_cf_gpios,
ARRAY_SIZE(vpac270_cf_gpios));
- skt->socket.pci_irq = gpio_to_irq(GPIO12_VPAC270_CF_RDY);
- cd_irqs[1].irq = gpio_to_irq(GPIO17_VPAC270_CF_CD);
-
- if (!ret)
- ret = soc_pcmcia_request_irqs(skt, &cd_irqs[1], 1);
+ skt->stat[SOC_STAT_CD].gpio = GPIO17_VPAC270_CF_CD;
+ skt->stat[SOC_STAT_CD].name = "CF CD";
+ skt->stat[SOC_STAT_RDY].gpio = GPIO12_VPAC270_CF_RDY;
+ skt->stat[SOC_STAT_RDY].name = "CF Ready";
}
return ret;
@@ -86,15 +69,6 @@ static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
static void vpac270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
- if (skt->nr == 0) {
- state->detect = !gpio_get_value(GPIO84_VPAC270_PCMCIA_CD);
- state->ready = !!gpio_get_value(GPIO35_VPAC270_PCMCIA_RDY);
- } else {
- state->detect = !gpio_get_value(GPIO17_VPAC270_CF_CD);
- state->ready = !!gpio_get_value(GPIO12_VPAC270_CF_RDY);
- }
- state->bvd1 = 1;
- state->bvd2 = 1;
state->wrprot = 0;
state->vs_3v = 1;
state->vs_Xv = 0;
@@ -117,14 +91,6 @@ vpac270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
return 0;
}
-static void vpac270_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
-{
-}
-
-static void vpac270_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
-{
-}
-
static struct pcmcia_low_level vpac270_pcmcia_ops = {
.owner = THIS_MODULE,
@@ -136,9 +102,6 @@ static struct pcmcia_low_level vpac270_pcmcia_ops = {
.socket_state = vpac270_pcmcia_socket_state,
.configure_socket = vpac270_pcmcia_configure_socket,
-
- .socket_init = vpac270_pcmcia_socket_init,
- .socket_suspend = vpac270_pcmcia_socket_suspend,
};
static struct platform_device *vpac270_pcmcia_device;
--
1.7.4.4
More information about the linux-arm-kernel
mailing list