[PATCH 30/31] ARM: amba: spear: use common amba device initializers

Viresh Kumar viresh.kumar at st.com
Fri Jan 20 04:38:32 EST 2012


On 1/20/2012 3:02 PM, Russell King - ARM Linux wrote:
> Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
> ---
>  arch/arm/mach-spear3xx/spear300.c |   14 ++------------
>  arch/arm/mach-spear3xx/spear3xx.c |   27 ++++-----------------------
>  2 files changed, 6 insertions(+), 35 deletions(-)
> 
> diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
> index 6fdeec9..9da50e281 100644
> --- a/arch/arm/mach-spear3xx/spear300.c
> +++ b/arch/arm/mach-spear3xx/spear300.c
> @@ -430,18 +430,8 @@ static struct pl061_platform_data gpio1_plat_data = {
>  	.irq_base	= SPEAR300_GPIO1_INT_BASE,
>  };
>  
> -struct amba_device spear300_gpio1_device = {
> -	.dev = {
> -		.init_name = "gpio1",
> -		.platform_data = &gpio1_plat_data,
> -	},
> -	.res = {
> -		.start = SPEAR300_GPIO_BASE,
> -		.end = SPEAR300_GPIO_BASE + SZ_4K - 1,
> -		.flags = IORESOURCE_MEM,
> -	},
> -	.irq = {SPEAR300_VIRQ_GPIO1},
> -};
> +AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE,
> +	{SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data);
>  
>  /* spear300 routines */
>  void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
> diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
> index bc4f1c6..b1733c3 100644
> --- a/arch/arm/mach-spear3xx/spear3xx.c
> +++ b/arch/arm/mach-spear3xx/spear3xx.c
> @@ -28,31 +28,12 @@ static struct pl061_platform_data gpio_plat_data = {
>  	.irq_base	= SPEAR3XX_GPIO_INT_BASE,
>  };
>  
> -struct amba_device spear3xx_gpio_device = {
> -	.dev = {
> -		.init_name = "gpio",
> -		.platform_data = &gpio_plat_data,
> -	},
> -	.res = {
> -		.start = SPEAR3XX_ICM3_GPIO_BASE,
> -		.end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1,
> -		.flags = IORESOURCE_MEM,
> -	},
> -	.irq = {SPEAR3XX_IRQ_BASIC_GPIO},
> -};
> +AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE,
> +	{SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data);
>  
>  /* uart device registration */
> -struct amba_device spear3xx_uart_device = {
> -	.dev = {
> -		.init_name = "uart",
> -	},
> -	.res = {
> -		.start = SPEAR3XX_ICM1_UART_BASE,
> -		.end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1,
> -		.flags = IORESOURCE_MEM,
> -	},
> -	.irq = {SPEAR3XX_IRQ_UART},
> -};
> +AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE,
> +	{SPEAR3XX_IRQ_UART}, NULL);
>  
>  /* Do spear3xx familiy common initialization part here */
>  void __init spear3xx_init(void)

Acked-by: Viresh Kumar <viresh.kumar at st.com>

-- 
viresh



More information about the linux-arm-kernel mailing list