[PATCH 2/3] ARM: at91/tc: add device tree support to atmel_tclib
Nicolas Ferre
nicolas.ferre at atmel.com
Thu Jan 19 13:05:11 EST 2012
Device tree support added to atmel_tclib: the generic Timer Counter
library. This is used by the clocksource/clockevent driver tcb_clksrc.
The current DT enabled platforms are also modified to use it:
- .dtsi files are modified to add Timer Counter Block entries
- alias are created to allow identification of each block
- clkdev lookup tables are added for clocks identification.
Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
---
arch/arm/boot/dts/at91sam9g20.dtsi | 14 ++++++++++++++
arch/arm/boot/dts/at91sam9g45.dtsi | 15 +++++++++++++++
arch/arm/mach-at91/at91sam9260.c | 7 +++++++
arch/arm/mach-at91/at91sam9260_devices.c | 17 +++++++++++++++++
arch/arm/mach-at91/at91sam9g45.c | 3 +++
arch/arm/mach-at91/at91sam9g45_devices.c | 17 +++++++++++++++++
drivers/misc/atmel_tclib.c | 27 +++++++++++++++++++++++++--
7 files changed, 98 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index 4cd2749..073a538 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -26,6 +26,8 @@
gpio0 = &pioA;
gpio1 = &pioB;
gpio2 = &pioC;
+ tcb0 = &tcb0;
+ tcb1 = &tcb1;
};
cpus {
cpu at 0 {
@@ -63,6 +65,18 @@
interrupts = <1 4>;
};
+ tcb0: timer at fffa0000 {
+ compatible = "atmel,at91rm9200-tcb";
+ reg = <0xfffa0000 0x100>;
+ interrupts = <17 4 18 4 19 4>;
+ };
+
+ tcb1: timer at fffdc000 {
+ compatible = "atmel,at91rm9200-tcb";
+ reg = <0xfffdc000 0x100>;
+ interrupts = <26 4 27 4 28 4>;
+ };
+
pioA: gpio at fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x100>;
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 0d21c8e..9406062 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -27,6 +27,8 @@
gpio2 = &pioC;
gpio3 = &pioD;
gpio4 = &pioE;
+ tcb0 = &tcb0;
+ tcb1 = &tcb1;
};
cpus {
cpu at 0 {
@@ -64,6 +66,19 @@
interrupts = <1 4>;
};
+
+ tcb0: timer at fff7c000 {
+ compatible = "atmel,at91rm9200-tcb";
+ reg = <0xfff7c000 0x100>;
+ interrupts = <18 4>;
+ };
+
+ tcb1: timer at fffd4000 {
+ compatible = "atmel,at91rm9200-tcb";
+ reg = <0xfffd4000 0x100>;
+ interrupts = <18 4>;
+ };
+
dma: dma-controller at ffffec00 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>;
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index aad68b1..69b1cc1 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -208,6 +208,13 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk),
CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk),
CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk),
+ /* more tc lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "fffdc000.timer", &tc3_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index ea66087..39cb6f2 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -698,8 +698,25 @@ static struct platform_device at91sam9260_tcb1_device = {
.num_resources = ARRAY_SIZE(tcb1_resources),
};
+#if defined(CONFIG_OF)
+static struct of_device_id tcb_ids[] = {
+ { .compatible = "atmel,at91rm9200-tcb" },
+ { /*sentinel*/ }
+};
+#endif
+
static void __init at91_add_device_tc(void)
{
+#if defined(CONFIG_OF)
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, tcb_ids);
+ if (np) {
+ of_node_put(np);
+ return;
+ }
+#endif
+
platform_device_register(&at91sam9260_tcb0_device);
platform_device_register(&at91sam9260_tcb1_device);
}
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 4895b04..0e30a75 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -230,6 +230,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk),
+ /* more tc lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb0_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 545bbe9..a0a217d 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -995,8 +995,25 @@ static struct platform_device at91sam9g45_tcb1_device = {
.num_resources = ARRAY_SIZE(tcb1_resources),
};
+#if defined(CONFIG_OF)
+static struct of_device_id tcb_ids[] = {
+ { .compatible = "atmel,at91rm9200-tcb" },
+ { /*sentinel*/ }
+};
+#endif
+
static void __init at91_add_device_tc(void)
{
+#if defined(CONFIG_OF)
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, tcb_ids);
+ if (np) {
+ of_node_put(np);
+ return;
+ }
+#endif
+
platform_device_register(&at91sam9g45_tcb0_device);
platform_device_register(&at91sam9g45_tcb1_device);
}
diff --git a/drivers/misc/atmel_tclib.c b/drivers/misc/atmel_tclib.c
index 7a6512a..de6dea7 100644
--- a/drivers/misc/atmel_tclib.c
+++ b/drivers/misc/atmel_tclib.c
@@ -6,8 +6,10 @@
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/export.h>
+#include <linux/of.h>
/*
* This is a thin library to solve the problem of how to portably allocate
@@ -48,7 +50,13 @@ struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name)
spin_lock(&tc_list_lock);
list_for_each_entry(tc, &tc_list, node) {
- if (tc->pdev->id == block) {
+ if (tc->pdev->dev.of_node) {
+ if (of_alias_get_id(tc->pdev->dev.of_node, "tcb")
+ == block) {
+ pdev = tc->pdev;
+ break;
+ }
+ } else if (tc->pdev->id == block) {
pdev = tc->pdev;
break;
}
@@ -105,6 +113,18 @@ void atmel_tc_free(struct atmel_tc *tc)
}
EXPORT_SYMBOL_GPL(atmel_tc_free);
+#if defined(CONFIG_OF)
+static const struct of_device_id atmel_tcb_dt_ids[] = {
+ {
+ .compatible = "atmel,at91rm9200-tcb",
+ }, {
+ /* sentinel */
+ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_tcb_dt_ids);
+#endif
+
static int __init tc_probe(struct platform_device *pdev)
{
struct atmel_tc *tc;
@@ -154,7 +174,10 @@ static int __init tc_probe(struct platform_device *pdev)
}
static struct platform_driver tc_driver = {
- .driver.name = "atmel_tcb",
+ .driver = {
+ .name = "atmel_tcb",
+ .of_match_table = of_match_ptr(atmel_tcb_dt_ids),
+ },
};
static int __init tc_init(void)
--
1.7.5.4
More information about the linux-arm-kernel
mailing list