[PATCH 00/10] patch set about the MXS-DMA
Huang Shijie
b32955 at freescale.com
Thu Jan 19 01:15:57 EST 2012
This patch set does two things about the MXS-DMA:
[1] patch 1 ~ patch 5: move the mxs dma header to a more common place.
Beside the mx23/mx28, the APBH-DMA is also used by MX50 and MX6Q.
So move the mxs dma header file to a more common place, and rename
it to mxs-dma.h
[2] patch 6 ~ patch 10: rewrite the last parameter of mxs_dma_prep_slave_sg().
In the new GPMI version, some hardware behavior changes.
The WAIT4END bit should be set in the middle one of the ECC READ page DMA chain.
The DMA chain should be set like this:
+-----+ +-----+ +-----+
| cmd | ------------> | cmd | ------------------> | cmd |
+-----+ +-----+ +-----+
^ ^
| |
| |
set WAIT4END here too set WAIT4END here
Please read the comment in patch "MXS-DMA : add more flags for MXS-DMA".
Huang Shijie (10):
MXS-DMA : move the mxs-dma.h to a more common place
MXS-DMA : change the header
MXS-MMC : change the DMA header file
MTD/GPMI : change the DMA header file
ASoc : change the DMA header file
MXS-DMA : add more flags for MXS-DMA
MXS-DMA : change the last parameter of mxs_dma_prep_slave_sg()
MXS-MMC : use the new DMA flags
MTD/GPMI : add a new field `gpmi_version`
MTD/GPMI : change the code for new DMA interface
arch/arm/mach-mxs/include/mach/dma.h | 28 ----------------
drivers/dma/mxs-dma.c | 12 ++++---
drivers/mmc/host/mxs-mmc.c | 12 +++---
drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 23 ++++++++++---
drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 6 +++-
drivers/mtd/nand/gpmi-nand/gpmi-regs.h | 2 +
include/linux/mxs-dma.h | 54 ++++++++++++++++++++++++++++++++
sound/soc/mxs/mxs-pcm.c | 2 +-
sound/soc/mxs/mxs-pcm.h | 2 +-
sound/soc/mxs/mxs-saif.c | 2 +-
10 files changed, 94 insertions(+), 49 deletions(-)
delete mode 100644 arch/arm/mach-mxs/include/mach/dma.h
create mode 100644 include/linux/mxs-dma.h
More information about the linux-arm-kernel
mailing list