[PATCH] ARM: mx28: Clear CLKGATE bit prior to changing DIV field

[Marek Vasut]

> MX28 Reference Manual states the following about the CLKGATE bit of
> register HW_CLKCTRL_SAIF0:
> 
> "The DIV field can change ONLY when this clock gate bit field is low."
> 
> So clear this bit prior to writing to the DIV field as required.
> 
> This also fixes the following error during mxs-sgtl5000 probe.
> 
> [    0.660000] saif0_clk_set_rate: divider writing timeout
> [    0.670000] mxs-sgtl5000: probe of mxs-sgtl5000.0 failed with error -110
> [    0.670000] ALSA device list:
> [    0.680000]   No soundcards found.
> 
> Audio is functional after this change.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>  arch/arm/mach-mxs/clock-mx28.c |    2 ++
>  1 files changed, 2 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-mxs/clock-mx28.c
> b/arch/arm/mach-mxs/clock-mx28.c index 5d68e41..f85c09d 100644
> --- a/arch/arm/mach-mxs/clock-mx28.c
> +++ b/arch/arm/mach-mxs/clock-mx28.c
> @@ -475,6 +475,8 @@ static int name##_set_rate(struct clk *clk, unsigned
> long rate)		\ return -EINVAL;						
\
>  									\
>  	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
> +									\
> +	reg &= ~BM_CLKCTRL_##rs##_CLKGATE;				\
>  	reg &= ~BM_CLKCTRL_##rs##_DIV;					\
>  	reg |= div << BP_CLKCTRL_##rs##_DIV;				\
>  	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\

Can you really do this in one swipe ? Or do you need to actually do one register 
write to ungate and another to do the configuration?

M