[PATCH 3/8] dmaengine/amba-pl08x: Take flow controller info from DMA_SLAVE_CONFIG

[Viresh Kumar]

Flow controller information is passed now from DMA_SLAVE_CONFIG option. This
patch makes changes in pl08x driver to use device_fc from it instead of platform
data.

Signed-off-by: Viresh Kumar <viresh.kumar at st.com>
---
 drivers/dma/amba-pl08x.c   |    4 +++-
 include/linux/amba/pl08x.h |    8 ++++----
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 9ebceca..e1a71f0 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -1139,6 +1139,8 @@ static int dma_set_runtime_config(struct dma_chan *chan,
 	cctl |= burst << PL080_CONTROL_SB_SIZE_SHIFT;
 	cctl |= burst << PL080_CONTROL_DB_SIZE_SHIFT;
 
+	plchan->device_fc = config->device_fc;
+
 	if (plchan->runtime_direction == DMA_DEV_TO_MEM) {
 		plchan->src_addr = config->src_addr;
 		plchan->src_cctl = pl08x_cctl(cctl) | PL080_CONTROL_DST_INCR |
@@ -1370,7 +1372,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
 		return NULL;
 	}
 
-	if (plchan->cd->device_fc)
+	if (plchan->device_fc)
 		tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER_PER :
 			PL080_FLOW_PER2MEM_PER;
 	else
diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h
index 033f6aa..2c58853 100644
--- a/include/linux/amba/pl08x.h
+++ b/include/linux/amba/pl08x.h
@@ -47,9 +47,6 @@ enum {
  * @muxval: a number usually used to poke into some mux regiser to
  * mux in the signal to this channel
  * @cctl_opt: default options for the channel control register
- * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave
- * channels. Fill with 'true' if peripheral should be flow controller. Direction
- * will be selected at Runtime.
  * @addr: source/target address in physical memory for this DMA channel,
  * can be the address of a FIFO register for burst requests for example.
  * This can be left undefined if the PrimeCell API is used for configuring
@@ -68,7 +65,6 @@ struct pl08x_channel_data {
 	int max_signal;
 	u32 muxval;
 	u32 cctl;
-	bool device_fc;
 	dma_addr_t addr;
 	bool circular_buffer;
 	bool single;
@@ -183,6 +179,9 @@ enum pl08x_dma_chan_state {
  * @host: a pointer to the host (internal use)
  * @state: whether the channel is idle, paused, running etc
  * @slave: whether this channel is a device (slave) or for memcpy
+ * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave
+ * channels. Fill with 'true' if peripheral should be flow controller. Direction
+ * will be selected at Runtime.
  * @waiting: a TX descriptor on this channel which is waiting for a physical
  * channel to become available
  */
@@ -205,6 +204,7 @@ struct pl08x_dma_chan {
 	struct pl08x_driver_data *host;
 	enum pl08x_dma_chan_state state;
 	bool slave;
+	bool device_fc;
 	struct pl08x_txd *waiting;
 };
 
-- 
1.7.8.110.g4cb5d