[PATCH v2 6/7] ARM: highbank: remove incorrect BSYM usage

[Rob Herring]

From: Rob Herring <rob.herring at calxeda.com>

BSYM macro is only needed for assembly files and its usage in c files is
wrong, so remove it. The linker will correctly set bit 0 for Thumb2
kernels.

Signed-off-by: Rob Herring <rob.herring at calxeda.com>
Cc: Dave Martin <dave.martin at linaro.org>
---
 arch/arm/mach-highbank/highbank.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 804c4a5..7afbe1e 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -25,7 +25,6 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
-#include <asm/unified.h>
 #include <asm/smp_scu.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/timer-sp.h>
@@ -76,7 +75,7 @@ void highbank_set_cpu_jump(int cpu, void *jump_addr)
 #ifdef CONFIG_SMP
 	cpu = cpu_logical_map(cpu);
 #endif
-	writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
+	writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
 	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
 	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
 			  HB_JUMP_TABLE_PHYS(cpu) + 15);
-- 
1.7.5.4