[PATCH] ARM: OMAP: fix MMC2 loopback clock handling

[Igor Grinberg]

On 01/12/12 16:26, Grazvydas Ignotas wrote:
> Currently MMC2 setup code can only enable loopback clock and
> relies on reset value for boards that need to have it disabled.
> This causes a problem with certain bootloaders that always enable
> that clock, resulting with unwanted bootloader dependencies.
> 
> Fix this by making it disable the clock if board data says so.
> 
> Signed-off-by: Grazvydas Ignotas <notasas at gmail.com>

Acked-by: Igor Grinberg <grinberg at compulab.co.il>

> ---
> depends on "ARM: OMAP: fix erroneous mmc2 clock change on mmc3 setup"
> http://marc.info/?l=linux-omap&m=132416866125291&w=2
> 
>  arch/arm/mach-omap2/hsmmc.c |    9 +++++----
>  1 files changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
> index 8658bd7..ad0adb5 100644
> --- a/arch/arm/mach-omap2/hsmmc.c
> +++ b/arch/arm/mach-omap2/hsmmc.c
> @@ -175,11 +175,12 @@ static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc)
>  {
>  	u32 reg;
>  
> -	if (mmc->slots[0].internal_clock) {
> -		reg = omap_ctrl_readl(control_devconf1_offset);
> +	reg = omap_ctrl_readl(control_devconf1_offset);
> +	if (mmc->slots[0].internal_clock)
>  		reg |= OMAP2_MMCSDIO2ADPCLKISEL;
> -		omap_ctrl_writel(reg, control_devconf1_offset);
> -	}
> +	else
> +		reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
> +	omap_ctrl_writel(reg, control_devconf1_offset);
>  }
>  
>  static void hsmmc2_before_set_reg(struct device *dev, int slot,

-- 
Regards,
Igor.