[PATCH v3 1/2] PM / Domains: Add OF support
Thomas Abraham
thomas.abraham at linaro.org
Thu Jan 12 02:50:08 EST 2012
A device node pointer is added to generic pm domain structure to associate
the domain with a node in the device tree. The platform code parses the
device tree to find available nodes representing the generic power domain,
instantiates the available domains and initializes them by calling
pm_genpd_init().
Nodes representing the devices include a phandle of the power domain to
which it belongs. As these devices get instantiated, the driver code
checkes for availability of a power domain phandle, converts the phandle
to a device node and uses the new pm_genpd_of_add_device() api to
associate the device with a power domain.
pm_genpd_of_add_device() runs through its list of registered power domains
and matches the OF node of the domain with the one specified as the
parameter. If a match is found, the device is associated with the matched
domain.
Cc: Rafael J. Wysocki <rjw at sisk.pl>
Cc: Rob Herring <rob.herring at calxeda.com>
Cc: Grant Likely <grant.likely at secretlab.ca>
Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
---
drivers/base/power/domain.c | 32 ++++++++++++++++++++++++++++++++
include/linux/pm_domain.h | 12 ++++++++++++
2 files changed, 44 insertions(+), 0 deletions(-)
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 92e6a90..9ee1f7b 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -1171,6 +1171,38 @@ int __pm_genpd_add_device(struct generic_pm_domain *genpd, struct device *dev,
}
/**
+ * __pm_genpd_of_add_device - Add a device to an I/O PM domain.
+ * @genpd_node: Device tree node pointer representing a PM domain to which the
+ * the device is added to.
+ * @dev: Device to be added.
+ * @td: Set of PM QoS timing parameters to attach to the device.
+ */
+int __pm_genpd_of_add_device(struct device_node *genpd_node, struct device *dev,
+ struct gpd_timing_data *td)
+{
+ struct generic_pm_domain *genpd = NULL, *gpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ if (IS_ERR_OR_NULL(genpd_node) || IS_ERR_OR_NULL(dev))
+ return -EINVAL;
+
+ mutex_lock(&gpd_list_lock);
+ list_for_each_entry(gpd, &gpd_list, gpd_list_node) {
+ if (gpd->of_node == genpd_node) {
+ genpd = gpd;
+ break;
+ }
+ }
+ mutex_unlock(&gpd_list_lock);
+
+ if (!genpd)
+ return -EINVAL;
+
+ return __pm_genpd_add_device(genpd, dev, td);
+}
+
+/**
* pm_genpd_remove_device - Remove a device from an I/O PM domain.
* @genpd: PM domain to remove the device from.
* @dev: Device to be removed.
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index a03a0ad..e3ff875 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -11,6 +11,7 @@
#include <linux/device.h>
#include <linux/err.h>
+#include <linux/of.h>
enum gpd_status {
GPD_STATE_ACTIVE = 0, /* PM domain is active */
@@ -70,6 +71,7 @@ struct generic_pm_domain {
s64 break_even_ns; /* Power break even for the entire domain. */
s64 max_off_time_ns; /* Maximum allowed "suspended" time. */
ktime_t power_off_time;
+ struct device_node *of_node; /* Node in device tree */
};
static inline struct generic_pm_domain *pd_to_genpd(struct dev_pm_domain *pd)
@@ -117,12 +119,22 @@ extern int __pm_genpd_add_device(struct generic_pm_domain *genpd,
struct device *dev,
struct gpd_timing_data *td);
+extern int __pm_genpd_of_add_device(struct device_node *genpd_node,
+ struct device *dev,
+ struct gpd_timing_data *td);
+
static inline int pm_genpd_add_device(struct generic_pm_domain *genpd,
struct device *dev)
{
return __pm_genpd_add_device(genpd, dev, NULL);
}
+static inline int pm_genpd_of_add_device(struct device_node *genpd_node,
+ struct device *dev)
+{
+ return __pm_genpd_of_add_device(genpd_node, dev, NULL);
+}
+
extern int pm_genpd_remove_device(struct generic_pm_domain *genpd,
struct device *dev);
extern int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
--
1.6.6.rc2
More information about the linux-arm-kernel
mailing list