[PATCH V2 4/4] CS89x0 : remove QQ2440 board support from the CS89x0 driver
Jaccon Bastiaansen
jaccon.bastiaansen at gmail.com
Tue Jan 10 18:14:54 EST 2012
The QQ2440 board isn't supported anymore in the kernel, so support
for this board can be removed from the CS89x0 driver.
Signed-off-by: Jaccon Bastiaansen <jaccon.bastiaansen at gmail.com>
---
drivers/net/Space.c | 2 +-
drivers/net/ethernet/cirrus/cs89x0.c | 11 ++---------
2 files changed, 3 insertions(+), 10 deletions(-)
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 04c4561..2e9c222 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -191,7 +191,7 @@ static struct devprobe2 isa_probes[] __initdata = {
#endif
#ifdef CONFIG_CS89x0
#if !defined(CONFIG_CS89x0_PLATFORM) || defined(CONFIG_MACH_IXDP2351) || \
- defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_MACH_QQ2440)
+ defined(CONFIG_ARCH_IXDP2X01)
{cs89x0_probe, 0},
#endif
#endif
diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c
index 9149974..af5042d 100644
--- a/drivers/net/ethernet/cirrus/cs89x0.c
+++ b/drivers/net/ethernet/cirrus/cs89x0.c
@@ -181,10 +181,6 @@ static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
#elif defined(CONFIG_ARCH_IXDP2X01)
static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
-#elif defined(CONFIG_MACH_QQ2440)
-#include <mach/qq2440.h>
-static unsigned int netcard_portlist[] __used __initdata = { QQ2440_CS8900_VIRT_BASE + 0x300, 0 };
-static unsigned int cs8900_irq_map[] = { QQ2440_CS8900_IRQ, 0, 0, 0 };
#endif
#else
static unsigned int netcard_portlist[] __used __initdata =
@@ -297,7 +293,7 @@ __setup("cs89x0_media=", media_fn);
#if !defined(CONFIG_CS89x0_PLATFORM) || defined(CONFIG_MACH_IXDP2351) || \
- defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_MACH_QQ2440)
+ defined(CONFIG_ARCH_IXDP2X01)
/* Check for a network adaptor of this type, and return '0' iff one exists.
If dev->base_addr == 0, probe all likely locations.
If dev->base_addr == 1, always return failure.
@@ -534,9 +530,6 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
lp->force = g_cs89x0_media__force;
#endif
-#if defined(CONFIG_MACH_QQ2440)
- lp->force |= FORCE_RJ45 | FORCE_FULL;
-#endif
}
/* Grab the region so we can find another board if autoIRQ fails. */
@@ -1173,7 +1166,7 @@ write_irq(struct net_device *dev, int chip_type, int irq)
if (chip_type == CS8900) {
#if !defined(CONFIG_CS89x0_PLATFORM) || defined(CONFIG_MACH_IXDP2351) || \
- defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_MACH_QQ2440)
+ defined(CONFIG_ARCH_IXDP2X01)
/* Search the mapping table for the corresponding IRQ pin. */
for (i = 0; i != ARRAY_SIZE(cs8900_irq_map); i++)
if (cs8900_irq_map[i] == irq)
--
1.7.1
More information about the linux-arm-kernel
mailing list