[PATCH V2 1/4] CS89x0 : add platform driver support

Jaccon Bastiaansen jaccon.bastiaansen at gmail.com
Tue Jan 10 18:13:17 EST 2012


The CS89x0 ethernet controller is used on a number of evaluation
boards, such as the MX31ADS. The current driver has memory address and
IRQ settings for each board on which this controller is used. Driver
updates are therefore required to support other boards that also use
the CS89x0. To avoid these driver updates, a better mechanism
(platform driver support) is added to communicate the board dependent
settings to the driver.

Signed-off-by: Jaccon Bastiaansen <jaccon.bastiaansen at gmail.com>
---
 drivers/net/Space.c                  |    4 +
 drivers/net/ethernet/cirrus/Kconfig  |   19 +++--
 drivers/net/ethernet/cirrus/cs89x0.c |  147 +++++++++++++++++++++++++++++-----
 3 files changed, 143 insertions(+), 27 deletions(-)

diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 068c356..00fe11b 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -190,8 +190,12 @@ static struct devprobe2 isa_probes[] __initdata = {
 	{seeq8005_probe, 0},
 #endif
 #ifdef CONFIG_CS89x0
+#if !defined(CONFIG_CS89x0_PLATFORM) || defined(CONFIG_MACH_IXDP2351) || \
+	defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_MACH_QQ2440) || \
+	defined(CONFIG_MACH_MX31ADS)
  	{cs89x0_probe, 0},
 #endif
+#endif
 #ifdef CONFIG_AT1700
 	{at1700_probe, 0},
 #endif
diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig
index 1f8648f..3784b1b 100644
--- a/drivers/net/ethernet/cirrus/Kconfig
+++ b/drivers/net/ethernet/cirrus/Kconfig
@@ -5,8 +5,7 @@
 config NET_VENDOR_CIRRUS
 	bool "Cirrus devices"
 	default y
-	depends on ISA || EISA || MACH_IXDP2351 || ARCH_IXDP2X01 \
-		|| MACH_MX31ADS || MACH_QQ2440 || (ARM && ARCH_EP93XX) || MAC
+	depends on ISA || EISA || ARM || (ARM && ARCH_EP93XX) || MAC
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
@@ -21,8 +20,7 @@ if NET_VENDOR_CIRRUS
 
 config CS89x0
 	tristate "CS89x0 support"
-	depends on (ISA || EISA || MACH_IXDP2351 \
-		|| ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440)
+	depends on ISA || EISA || ARM
 	---help---
 	  Support for CS89x0 chipset based Ethernet cards. If you have a
 	  network (Ethernet) card of this type, say Y and read the
@@ -33,10 +31,15 @@ config CS89x0
 	  To compile this driver as a module, choose M here. The module
 	  will be called cs89x0.
 
-config CS89x0_NONISA_IRQ
-	def_bool y
-	depends on CS89x0 != n
-	depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
+config CS89x0_PLATFORM
+	bool "CS89x0 platform driver support"
+	depends on CS89x0
+	help
+	  Say Y to compile the cs89x0 driver as a platform driver. This
+	  makes this driver suitable for use on certain evaluation boards
+	  such as the iMX21ADS.
+
+	  If you are unsure, say N.
 
 config EP93XX_ETH
 	tristate "EP93xx Ethernet support"
diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c
index f328da2..d6c6398 100644
--- a/drivers/net/ethernet/cirrus/cs89x0.c
+++ b/drivers/net/ethernet/cirrus/cs89x0.c
@@ -100,9 +100,6 @@
 
 */
 
-/* Always include 'config.h' first in case the user wants to turn on
-   or override something. */
-#include <linux/module.h>
 
 /*
  * Set this to zero to disable DMA code
@@ -131,9 +128,12 @@
 
 */
 
+#include <linux/module.h>
+#include <linux/printk.h>
 #include <linux/errno.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
+#include <linux/platform_device.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/fcntl.h>
@@ -151,13 +151,14 @@
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
+#include <linux/atomic.h>
 #if ALLOW_DMA
 #include <asm/dma.h>
 #endif
 
 #include "cs89x0.h"
 
-static char version[] __initdata =
+static char version[] =
 "cs89x0.c: v2.4.3-pre1 Russell Nelson <nelson at crynwr.com>, Andrew Morton\n";
 
 #define DRV_NAME "cs89x0"
@@ -173,6 +174,7 @@ static char version[] __initdata =
 /* The cs8900 has 4 IRQ pins, software selectable. cs8900_irq_map maps
    them to system IRQ numbers. This mapping is card specific and is set to
    the configuration of the Cirrus Eval board for this chip. */
+#if defined(CONFIG_CS89x0_PLATFORM)
 #if defined(CONFIG_MACH_IXDP2351)
 static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
@@ -189,6 +191,7 @@ static unsigned int netcard_portlist[] __used __initdata = {
 	PBC_BASE_ADDRESS + PBC_CS8900A_IOBASE + 0x300, 0
 };
 static unsigned cs8900_irq_map[] = {EXPIO_INT_ENET_INT, 0, 0, 0};
+#endif
 #else
 static unsigned int netcard_portlist[] __used __initdata =
    { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
@@ -236,6 +239,11 @@ struct net_local {
 	unsigned char *end_dma_buff;	/* points to the end of the buffer */
 	unsigned char *rx_dma_ptr;	/* points to the next packet  */
 #endif
+#ifdef CONFIG_CS89x0_PLATFORM
+	void *virt_addr;	/* Virtual address for accessing the CS890x. */
+	unsigned long phys_addr;/* Physical address for accessing the CS89x0. */
+	unsigned long size;	/* Length of CS89x0 memory region. */
+#endif
 };
 
 /* Index to functions, as function prototypes. */
@@ -294,6 +302,9 @@ static int __init media_fn(char *str)
 __setup("cs89x0_media=", media_fn);
 
 
+#if !defined(CONFIG_CS89x0_PLATFORM) || defined(CONFIG_MACH_IXDP2351) || \
+	defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_MACH_QQ2440) ||  \
+	defined(CONFIG_MACH_MX31ADS)
 /* Check for a network adaptor of this type, and return '0' iff one exists.
    If dev->base_addr == 0, probe all likely locations.
    If dev->base_addr == 1, always return failure.
@@ -343,6 +354,7 @@ out:
 	return ERR_PTR(err);
 }
 #endif
+#endif
 
 #if defined(CONFIG_MACH_IXDP2351)
 static u16
@@ -424,7 +436,7 @@ writereg(struct net_device *dev, u16 regno, u16 value)
 	writeword(dev->base_addr, DATA_PORT, value);
 }
 
-static int __init
+static int
 wait_eeprom_ready(struct net_device *dev)
 {
 	int timeout = jiffies;
@@ -437,7 +449,7 @@ wait_eeprom_ready(struct net_device *dev)
 	return 0;
 }
 
-static int __init
+static int
 get_eeprom_data(struct net_device *dev, int off, int len, int *buffer)
 {
 	int i;
@@ -455,7 +467,7 @@ get_eeprom_data(struct net_device *dev, int off, int len, int *buffer)
         return 0;
 }
 
-static int  __init
+static int
 get_eeprom_cksum(int off, int len, int *buffer)
 {
 	int i, cksum;
@@ -503,7 +515,7 @@ static const struct net_device_ops net_ops = {
    Return 0 on success.
  */
 
-static int __init
+static int
 cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 {
 	struct net_local *lp = netdev_priv(dev);
@@ -736,10 +748,8 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 			dev->irq = i;
 	} else {
 		i = lp->isa_config & INT_NO_MASK;
+#ifndef CONFIG_CS89x0_PLATFORM
 		if (lp->chip_type == CS8900) {
-#ifdef CONFIG_CS89x0_NONISA_IRQ
-		        i = cs8900_irq_map[0];
-#else
 			/* Translate the IRQ using the IRQ mapping table. */
 			if (i >= ARRAY_SIZE(cs8900_irq_map))
 				printk("\ncs89x0: invalid ISA interrupt number %d\n", i);
@@ -747,6 +757,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 				i = cs8900_irq_map[i];
 
 			lp->irq_map = CS8900_IRQ_MAP; /* fixed IRQ map for CS8900 */
+
 		} else {
 			int irq_map_buff[IRQ_MAP_LEN/2];
 
@@ -756,8 +767,8 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 				if ((irq_map_buff[0] & 0xff) == PNP_IRQ_FRMT)
 					lp->irq_map = (irq_map_buff[0]>>8) | (irq_map_buff[1] << 8);
 			}
-#endif
 		}
+#endif
 		if (!dev->irq)
 			dev->irq = i;
 	}
@@ -954,10 +965,10 @@ skip_this_frame:
 static void __init reset_chip(struct net_device *dev)
 {
 #if !defined(CONFIG_MACH_MX31ADS)
-#if !defined(CS89x0_NONISA_IRQ)
+#if !defined(CONFIG_CS89x0_PLATFORM)
 	struct net_local *lp = netdev_priv(dev);
 	int ioaddr = dev->base_addr;
-#endif /* CS89x0_NONISA_IRQ */
+#endif /* CONFIG_CS89x0_PLATFORM */
 	int reset_start_time;
 
 	writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET);
@@ -965,7 +976,7 @@ static void __init reset_chip(struct net_device *dev)
 	/* wait 30 ms */
 	msleep(30);
 
-#if !defined(CS89x0_NONISA_IRQ)
+#if !defined(CONFIG_CS89x0_PLATFORM)
 	if (lp->chip_type != CS8900) {
 		/* Hardware problem requires PNP registers to be reconfigured after a reset */
 		writeword(ioaddr, ADD_PORT, PP_CS8920_ISAINT);
@@ -976,7 +987,7 @@ static void __init reset_chip(struct net_device *dev)
 		outb((dev->mem_start >> 16) & 0xff, ioaddr + DATA_PORT);
 		outb((dev->mem_start >> 8) & 0xff,   ioaddr + DATA_PORT + 1);
 	}
-#endif /* CS89x0_NONISA_IRQ */
+#endif /* CONFIG_CS89x0_PLATFORM */
 
 	/* Wait until the chip is reset */
 	reset_start_time = jiffies;
@@ -1168,6 +1179,9 @@ write_irq(struct net_device *dev, int chip_type, int irq)
 	int i;
 
 	if (chip_type == CS8900) {
+#if !defined(CONFIG_CS89x0_PLATFORM) || defined(CONFIG_MACH_IXDP2351) || \
+	defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_MACH_QQ2440) ||  \
+	defined(CONFIG_MACH_MX31ADS)
 		/* Search the mapping table for the corresponding IRQ pin. */
 		for (i = 0; i != ARRAY_SIZE(cs8900_irq_map); i++)
 			if (cs8900_irq_map[i] == irq)
@@ -1175,6 +1189,10 @@ write_irq(struct net_device *dev, int chip_type, int irq)
 		/* Not found */
 		if (i == ARRAY_SIZE(cs8900_irq_map))
 			i = 3;
+#else
+		/* INTRQ0 pin is used for interrupt generation. */
+		i = 0;
+#endif
 		writereg(dev, PP_CS8900_ISAINT, i);
 	} else {
 		writereg(dev, PP_CS8920_ISAINT, irq);
@@ -1228,7 +1246,7 @@ net_open(struct net_device *dev)
 	}
 	else
 	{
-#ifndef CONFIG_CS89x0_NONISA_IRQ
+#ifndef CONFIG_CS89x0_PLATFORM
 		if (((1 << dev->irq) & lp->irq_map) == 0) {
 			printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
                                dev->name, dev->irq, lp->irq_map);
@@ -1746,7 +1764,7 @@ static int set_mac_address(struct net_device *dev, void *p)
 	return 0;
 }
 
-#ifdef MODULE
+#if defined(MODULE) && !defined(CONFIG_CS89x0_PLATFORM)
 
 static struct net_device *dev_cs89x0;
 
@@ -1900,7 +1918,98 @@ cleanup_module(void)
 	release_region(dev_cs89x0->base_addr, NETCARD_IO_EXTENT);
 	free_netdev(dev_cs89x0);
 }
-#endif /* MODULE */
+#endif /* MODULE && !CONFIG_CS89x0_PLATFORM */
+
+#ifdef CONFIG_CS89x0_PLATFORM
+static int cs89x0_platform_probe(struct platform_device *pdev)
+{
+	struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
+	struct net_local *lp = netdev_priv(dev);
+	struct resource *mem_res;
+	struct resource *irq_res;
+	int err;
+
+	if (!dev)
+		return -ENODEV;
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (mem_res == NULL || irq_res == NULL) {
+		dev_warn(&dev->dev, "memory/interrupt resource missing.\n");
+		err = -ENOENT;
+		goto free;
+	}
+
+	lp->phys_addr = mem_res->start;
+	lp->size = mem_res->end - mem_res->start + 1;
+	if (!request_mem_region(lp->phys_addr, lp->size, DRV_NAME)) {
+		dev_warn(&dev->dev, "request_mem_region() failed.\n");
+		err = -ENOMEM;
+		goto free;
+	}
+
+	lp->virt_addr = ioremap(lp->phys_addr, lp->size);
+	if (!lp->virt_addr) {
+		dev_warn(&dev->dev, "ioremap() failed.\n");
+		err = -ENOMEM;
+		goto release;
+	}
+
+	dev->irq = irq_res->start;
+	err = cs89x0_probe1(dev, (int)lp->virt_addr, 0);
+	if (err) {
+		dev_warn(&dev->dev, "no cs8900 or cs8920 detected.\n");
+		goto unmap;
+	}
+
+	platform_set_drvdata(pdev, dev);
+	return 0;
+
+unmap:
+	iounmap(lp->virt_addr);
+release:
+	release_mem_region(lp->phys_addr, lp->size);
+free:
+	free_netdev(dev);
+	return err;
+}
+
+static int cs89x0_platform_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct net_local *lp = netdev_priv(dev);
+
+	unregister_netdev(dev);
+	iounmap(lp->virt_addr);
+	release_mem_region(lp->phys_addr, lp->size);
+	free_netdev(dev);
+	return 0;
+}
+
+static struct platform_driver cs89x0_platform_driver = {
+	.driver = {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe	= cs89x0_platform_probe,
+	.remove	= cs89x0_platform_remove,
+};
+
+static int __init cs89x0_init(void)
+{
+	return platform_driver_register(&cs89x0_platform_driver);
+}
+
+module_init(cs89x0_init);
+
+static void __exit cs89x0_cleanup(void)
+{
+	platform_driver_unregister(&cs89x0_platform_driver);
+}
+
+module_exit(cs89x0_cleanup);
+
+#endif /* CONFIG_CS89x0_PLATFORM */
 
 /*
  * Local variables:
-- 
1.7.1




More information about the linux-arm-kernel mailing list