[PATCH v4] ARM: at91: pit add DT support
Nicolas Ferre
nicolas.ferre at atmel.com
Tue Jan 10 03:34:00 EST 2012
On 01/09/2012 06:39 PM, Jean-Christophe PLAGNIOL-VILLARD :
> On 09:47 Fri 06 Jan , Rob Herring wrote:
>> On 01/06/2012 10:20 AM, Nicolas Ferre wrote:
>>> From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
>>>
>>> Retreive registers address and IRQ from device tree entry. Fall back
>>> to built-in values if an error occurs.
>>>
>>> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
>>> [nicolas.ferre at atmel.com: change error path and interrupts property handling]
>>> Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
>>> Reviewed-by: Jamie Iles <jamie at jamieiles.com>
>>> Acked-by: Rob Herring <rob.herring at calxeda.com>
>>> ---
>>> v4: - change of_at91sam926x_pit_init() return value usage logic as
>>> suggested by Rob Herring
>>> - irq_of_parse_and_map() returns 0 on error: change test according to
>>> Grant Likely note.
>>>
>>> v3: - use irq_of_parse_and_map() for handling irq numbers specified by DT.
>>> Correction proposed by Jamie Iles.
>>>
>>> v2: - new specification of irq numbers in DT (due to modification of AIC code)
>>> - new error path in of_at91sam926x_pit_init()
>>> - fall back to built-in values if an error occurs
>>> - use of of_property_read_u32() to get irq property
>>>
>>> .../devicetree/bindings/arm/atmel-at91.txt | 8 +++
>>> arch/arm/boot/dts/at91sam9g20.dtsi | 5 ++
>>> arch/arm/boot/dts/at91sam9g45.dtsi | 6 ++
>>> arch/arm/mach-at91/at91sam926x_time.c | 60 ++++++++++++++++++--
>>> 4 files changed, 73 insertions(+), 6 deletions(-)
>>> create mode 100644 Documentation/devicetree/bindings/arm/atmel-at91.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
>>> new file mode 100644
>>> index 0000000..380f711
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
>>> @@ -0,0 +1,8 @@
>>> +Atmel AT91 device tree bindings.
>>> +================================
>>> +
>>> +PIT Timer required properties:
>>> +- compatible: Should be "atmel,at91sam9260-pit"
>>> +- reg: Should contain registers location and length
>>> +- interrupts: Should contain interrupt for the PIT which is the IRQ line
>>> + shared across all System Controller members.
>>> diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
>>> index ea942b5..e10842a 100644
>>> --- a/arch/arm/boot/dts/at91sam9g20.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9g20.dtsi
>>> @@ -57,6 +57,11 @@
>>> reg = <0xfffff000 0x200>;
>>> };
>>>
>>> + pit: timer at fffffd30 {
>>> + compatible = "atmel,at91sam9260-pit";
>>> + reg = <0xfffffd30 0xf>;
>>> + interrupts = <1 4>;
>>> + };
>>>
>>> pioA: gpio at fffff400 {
>>> compatible = "atmel,at91rm9200-gpio";
>>> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
>>> index ebc9617..28a678f 100644
>>> --- a/arch/arm/boot/dts/at91sam9g45.dtsi
>>> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
>>> @@ -58,6 +58,12 @@
>>> reg = <0xfffff000 0x200>;
>>> };
>>>
>>> + pit: timer at fffffd30 {
>>> + compatible = "atmel,at91sam9260-pit";
>>> + reg = <0xfffffd30 0xf>;
>>> + interrupts = <1 4>;
>>> + };
>>> +
>>> dma: dma-controller at ffffec00 {
>>> compatible = "atmel,at91sam9g45-dma";
>>> reg = <0xffffec00 0x200>;
>>> diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
>>> index d89ead7..802fea3 100644
>>> --- a/arch/arm/mach-at91/at91sam926x_time.c
>>> +++ b/arch/arm/mach-at91/at91sam926x_time.c
>>> @@ -14,6 +14,9 @@
>>> #include <linux/kernel.h>
>>> #include <linux/clk.h>
>>> #include <linux/clockchips.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_address.h>
>>> +#include <linux/of_irq.h>
>>>
>>> #include <asm/mach/time.h>
>>>
>>> @@ -133,7 +136,8 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
>>> static struct irqaction at91sam926x_pit_irq = {
>>> .name = "at91_tick",
>>> .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
>>> - .handler = at91sam926x_pit_interrupt
>>> + .handler = at91sam926x_pit_interrupt,
>>> + .irq = AT91_ID_SYS,
>>> };
>>>
>>> static void at91sam926x_pit_reset(void)
>>> @@ -149,6 +153,49 @@ static void at91sam926x_pit_reset(void)
>>> pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
>>> }
>>>
>>> +#ifdef CONFIG_OF
>>> +static struct of_device_id timer_ids[] = {
>>> + { .compatible = "atmel,at91sam9260-pit" },
>>> + { /* sentinel */ }
>>> +};
>>> +
>>> +static int __init of_at91sam926x_pit_init(void)
>>> +{
>>> + struct device_node *np;
>>> + int ret;
>>> +
>>> + np = of_find_matching_node(NULL, timer_ids);
>>> + if (!np)
>>> + goto err;
>>> +
>>> + pit_base_addr = of_iomap(np, 0);
>>> + if (!pit_base_addr)
>>> + goto node_err;
>>> +
>>> + /* Get the interrupts property */
>>> + ret = irq_of_parse_and_map(np, 0);
>>> + if (!ret)
>>> + goto ioremap_err;
>>> + at91sam926x_pit_irq.irq = ret;
>>> +
>>> + of_node_put(np);
>>> +
>>> + return 0;
>>> +
>>> +ioremap_err:
>>> + iounmap(pit_base_addr);
>>> +node_err:
>>> + of_node_put(np);
>>> +err:
>>> + return -EINVAL;
>>> +}
>>> +#else
>>> +static int __init of_at91sam926x_pit_init(void)
>>> +{
>>> + return -EINVAL;
>>> +}
>>> +#endif
>>> +
>>> /*
>>> * Set up both clocksource and clockevent support.
>>> */
>>> @@ -177,7 +224,7 @@ static void __init at91sam926x_pit_init(void)
>>> clocksource_register_hz(&pit_clk, pit_rate);
>>>
>>> /* Set up irq handler */
>>> - setup_irq(AT91_ID_SYS, &at91sam926x_pit_irq);
>>> + setup_irq(at91sam926x_pit_irq.irq, &at91sam926x_pit_irq);
>>>
>>> /* Set up and register clockevents */
>>> pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift);
>>> @@ -193,10 +240,11 @@ static void at91sam926x_pit_suspend(void)
>>>
>>> void __init at91sam926x_ioremap_pit(u32 addr)
>>> {
>>> - pit_base_addr = ioremap(addr, 16);
>>> -
>>> - if (!pit_base_addr)
>>> - panic("Impossible to ioremap PIT\n");
>>> + if (of_at91sam926x_pit_init() < 0) {
>>> + pit_base_addr = ioremap(addr, 16);
>>> + if (!pit_base_addr)
>>> + panic("Impossible to ioremap PIT\n");
>>> + }
>>
>> This is not what I meant. I meant call either at91sam926x_ioremap_pit or
>> of_at91sam926x_pit_init. Don't nest the calls and keep the OF and non-OF
>> init somewhat separate. The fact that you are passing in the physical
>> address and then ignoring it for the OF case is what I have issue with.
>
> the DT pure soc will pass NULL for soc that support both or only non of we
> pass the PHY addr
Yes, but don't your prefer to have another call that we can use as the
interface? In the future we will only have DT enabled SoC so maintaining
the need for this NULL parameter does not make much sense...
Bye,
--
Nicolas Ferre
More information about the linux-arm-kernel
mailing list