[PATCH v3] ARM: at91: pit add DT support

[Rob Herring]

On 01/05/2012 11:25 AM, Nicolas Ferre wrote:
> From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> 
> Retreive registers address and IRQ from device tree entry. Fall back
> to built-in values if an error occurs.
> 
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> [nicolas.ferre at atmel.com: change error path and interrupts property handling]
> Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
> ---
> v3: - use irq_of_parse_and_map() for handling irq numbers specified by DT.
>       Correction proposed by Jamie Iles.
> 
> v2: - new specification of irq numbers in DT (due to modification of AIC code)
>     - new error path in of_at91sam926x_pit_init()
>     - fall back to built-in values if an error occurs
>     - use of of_property_read_u32() to get irq property
> 
>  .../devicetree/bindings/arm/atmel-at91.txt         |    8 +++
>  arch/arm/boot/dts/at91sam9g20.dtsi                 |    5 ++
>  arch/arm/boot/dts/at91sam9g45.dtsi                 |    6 ++
>  arch/arm/mach-at91/at91sam926x_time.c              |   53 +++++++++++++++++++-
>  4 files changed, 70 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/arm/atmel-at91.txt
> 
> diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
> new file mode 100644
> index 0000000..380f711
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
> @@ -0,0 +1,8 @@
> +Atmel AT91 device tree bindings.
> +================================
> +
> +PIT Timer required properties:
> +- compatible: Should be "atmel,at91sam9260-pit"
> +- reg: Should contain registers location and length
> +- interrupts: Should contain interrupt for the PIT which is the IRQ line
> +  shared across all System Controller members.
> diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
> index 0d21872..5c4be7e 100644
> --- a/arch/arm/boot/dts/at91sam9g20.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g20.dtsi
> @@ -57,6 +57,11 @@
>  				reg = <0xfffff000 0x200>;
>  			};
>  
> +			pit: timer at fffffd30 {
> +				compatible = "atmel,at91sam9260-pit";
> +				reg = <0xfffffd30 0xf>;
> +				interrupts = <1 4>;
> +			};
>  
>  			pioA: gpio at fffff400 {
>  				compatible = "atmel,at91rm9200-gpio";
> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
> index b977a79..0d21c8e 100644
> --- a/arch/arm/boot/dts/at91sam9g45.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
> @@ -58,6 +58,12 @@
>  				reg = <0xfffff000 0x200>;
>  			};
>  
> +			pit: timer at fffffd30 {
> +				compatible = "atmel,at91sam9260-pit";
> +				reg = <0xfffffd30 0xf>;
> +				interrupts = <1 4>;
> +			};
> +
>  			dma: dma-controller at ffffec00 {
>  				compatible = "atmel,at91sam9g45-dma";
>  				reg = <0xffffec00 0x200>;
> diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
> index d89ead7..534a992 100644
> --- a/arch/arm/mach-at91/at91sam926x_time.c
> +++ b/arch/arm/mach-at91/at91sam926x_time.c
> @@ -14,6 +14,9 @@
>  #include <linux/kernel.h>
>  #include <linux/clk.h>
>  #include <linux/clockchips.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
>  
>  #include <asm/mach/time.h>
>  
> @@ -133,7 +136,8 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
>  static struct irqaction at91sam926x_pit_irq = {
>  	.name		= "at91_tick",
>  	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
> -	.handler	= at91sam926x_pit_interrupt
> +	.handler	= at91sam926x_pit_interrupt,
> +	.irq		= AT91_ID_SYS,
>  };
>  
>  static void at91sam926x_pit_reset(void)
> @@ -149,6 +153,49 @@ static void at91sam926x_pit_reset(void)
>  	pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
>  }
>  
> +#ifdef CONFIG_OF
> +static struct of_device_id timer_ids[] = {
> +	{ .compatible = "atmel,at91sam9260-pit" },
> +	{ /* sentinel */ }
> +};
> +
> +static int __init of_at91sam926x_pit_init(void)
> +{
> +	struct device_node	*np;
> +	int			ret;
> +
> +	np = of_find_matching_node(NULL, timer_ids);
> +	if (!np)
> +		goto err;
> +
> +	pit_base_addr = of_iomap(np, 0);
> +	if (!pit_base_addr)
> +		goto node_err;
> +
> +	/* Get the interrupts property */
> +	ret = irq_of_parse_and_map(np, 0);
> +	if (ret <= 0)
> +		goto ioremap_err;
> +	at91sam926x_pit_irq.irq = ret;
> +
> +	of_node_put(np);
> +
> +	return 0;
> +
> +ioremap_err:
> +	iounmap(pit_base_addr);
> +node_err:
> +	of_node_put(np);
> +err:
> +	return -EINVAL;
> +}
> +#else
> +static int __init of_at91sam926x_pit_init(void)
> +{
> +	return -EINVAL;
> +}
> +#endif
> +
>  /*
>   * Set up both clocksource and clockevent support.
>   */
> @@ -177,7 +224,7 @@ static void __init at91sam926x_pit_init(void)
>  	clocksource_register_hz(&pit_clk, pit_rate);
>  
>  	/* Set up irq handler */
> -	setup_irq(AT91_ID_SYS, &at91sam926x_pit_irq);
> +	setup_irq(at91sam926x_pit_irq.irq, &at91sam926x_pit_irq);
>  
>  	/* Set up and register clockevents */
>  	pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift);
> @@ -193,6 +240,8 @@ static void at91sam926x_pit_suspend(void)
>  
>  void __init at91sam926x_ioremap_pit(u32 addr)
>  {
> +	if (!of_at91sam926x_pit_init())
> +		return;

This seems backwards to me. I don't have the ioremap changes in my tree,
but shouldn't the caller of at91sam926x_ioremap_pit be changed to
something like this:

	if (of_at91sam926x_pit_init() < 0)
		at91sam926x_ioremap_pit(addr);

Otherwise,

Acked-by: Rob Herring <rob.herring at calxeda.com>

Rob

>  	pit_base_addr = ioremap(addr, 16);
>  
>  	if (!pit_base_addr)