[PATCH v2] ARM: at91: pit add DT support

[Jamie Iles]

Hi Nicolas, Jean-Christophe,

On Thu, Jan 05, 2012 at 02:48:28PM +0100, Nicolas Ferre wrote:
> From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> 
> Retreive registers address and IRQ from device tree entry. Fall back
> to built-in values if an error occurs.
> 
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> [nicolas.ferre at atmel.com: change error path and interrupts property handling]
> Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
> ---
[...]
> diff --git a/arch/arm/mach-at91/at91sam926x_time.c 
> b/arch/arm/mach-at91/at91sam926x_time.c
> index d89ead7..5d4c308 100644
> --- a/arch/arm/mach-at91/at91sam926x_time.c
> +++ b/arch/arm/mach-at91/at91sam926x_time.c
> @@ -14,6 +14,8 @@
[...]
> +static int __init of_at91sam926x_pit_init(void)
> +{
> +	struct device_node *np;
> +
> +	np = of_find_matching_node(NULL, timer_ids);
> +	if (!np)
> +		goto err;
> +
> +	pit_base_addr = of_iomap(np, 0);
> +	if (!pit_base_addr)
> +		goto node_err;
> +
> +	/* Get the interrupts property */
> +	if (of_property_read_u32(np, "interrupts", &at91sam926x_pit_irq.irq))
> +		goto ioremap_err;

I think you want:

	at91sam926x_pit_irq.irq = irq_of_parse_and_map(np, 0);

to make sure the IRQ is converted to a Linux IRQ and not a hwirq.  Other 
than that looks fine to me.

Jamie