[PATCH v2 3/6] ARM: at91/gpio: add DT support
Grant Likely
grant.likely at secretlab.ca
Wed Jan 4 14:45:08 EST 2012
On Tue, Jan 03, 2012 at 07:34:48PM +0100, Nicolas Ferre wrote:
> From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
>
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> [nicolas.ferre at atmel.com: modify DT initialization]
> Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
Acked-by: Grant Likely <grant.likely at secretlab.ca>
> ---
> v2: - no BUG_ON() anymore in case of an "interrupts" property missing
> just stop configuring the gpio bank
> - review error path in both of_at91_gpio_init_one() and
> at91_gpio_init_one()
> - use for_each_compatible_node() iterator instead of a homemade loop
>
> .../devicetree/bindings/gpio/gpio_at91.txt | 20 +++
> arch/arm/boot/dts/at91sam9g20.dtsi | 28 ++++
> arch/arm/boot/dts/at91sam9g45.dtsi | 45 ++++++
> arch/arm/mach-at91/gpio.c | 144 +++++++++++++++++---
> 4 files changed, 215 insertions(+), 22 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/gpio/gpio_at91.txt
>
> diff --git a/Documentation/devicetree/bindings/gpio/gpio_at91.txt b/Documentation/devicetree/bindings/gpio/gpio_at91.txt
> new file mode 100644
> index 0000000..a7bcaec
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/gpio_at91.txt
> @@ -0,0 +1,20 @@
> +* Atmel GPIO controller (PIO)
> +
> +Required properties:
> +- compatible: "atmel,at91rm9200-gpio"
> +- reg: Should contain GPIO controller registers location and length
> +- interrupts: Should be the port interrupt shared by all the pins.
> +- #gpio-cells: Should be two. The first cell is the pin number and
> + the second cell is used to specify optional parameters (currently
> + unused).
> +- gpio-controller: Marks the device node as a GPIO controller.
> +
> +Example:
> + pioA: gpio at fffff200 {
> + compatible = "atmel,at91rm9200-gpio";
> + reg = <0xfffff200 0x100>;
> + interrupts = <2 4>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + };
> +
> diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
> index 0782f80..ea942b5 100644
> --- a/arch/arm/boot/dts/at91sam9g20.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g20.dtsi
> @@ -23,6 +23,9 @@
> serial4 = &usart3;
> serial5 = &usart4;
> serial6 = &usart5;
> + gpio0 = &pioA;
> + gpio1 = &pioB;
> + gpio2 = &pioC;
> };
> cpus {
> cpu at 0 {
> @@ -54,6 +57,31 @@
> reg = <0xfffff000 0x200>;
> };
>
> +
> + pioA: gpio at fffff400 {
> + compatible = "atmel,at91rm9200-gpio";
> + reg = <0xfffff400 0x100>;
> + interrupts = <2 4>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + };
> +
> + pioB: gpio at fffff600 {
> + compatible = "atmel,at91rm9200-gpio";
> + reg = <0xfffff600 0x100>;
> + interrupts = <3 4>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + };
> +
> + pioC: gpio at fffff800 {
> + compatible = "atmel,at91rm9200-gpio";
> + reg = <0xfffff800 0x100>;
> + interrupts = <4 4>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + };
> +
> dbgu: serial at fffff200 {
> compatible = "atmel,at91sam9260-usart";
> reg = <0xfffff200 0x200>;
> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
> index e89b1d7..ebc9617 100644
> --- a/arch/arm/boot/dts/at91sam9g45.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
> @@ -22,6 +22,11 @@
> serial2 = &usart1;
> serial3 = &usart2;
> serial4 = &usart3;
> + gpio0 = &pioA;
> + gpio1 = &pioB;
> + gpio2 = &pioC;
> + gpio3 = &pioD;
> + gpio4 = &pioE;
> };
> cpus {
> cpu at 0 {
> @@ -59,6 +64,46 @@
> interrupts = <21 4>;
> };
>
> + pioA: gpio at fffff200 {
> + compatible = "atmel,at91rm9200-gpio";
> + reg = <0xfffff200 0x100>;
> + interrupts = <2 4>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + };
> +
> + pioB: gpio at fffff400 {
> + compatible = "atmel,at91rm9200-gpio";
> + reg = <0xfffff400 0x100>;
> + interrupts = <3 4>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + };
> +
> + pioC: gpio at fffff600 {
> + compatible = "atmel,at91rm9200-gpio";
> + reg = <0xfffff600 0x100>;
> + interrupts = <4 4>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + };
> +
> + pioD: gpio at fffff800 {
> + compatible = "atmel,at91rm9200-gpio";
> + reg = <0xfffff800 0x100>;
> + interrupts = <5 4>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + };
> +
> + pioE: gpio at fffffa00 {
> + compatible = "atmel,at91rm9200-gpio";
> + reg = <0xfffffa00 0x100>;
> + interrupts = <5 4>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + };
> +
> dbgu: serial at ffffee00 {
> compatible = "atmel,at91sam9260-usart";
> reg = <0xffffee00 0x200>;
> diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
> index 7ffb893..4e1cab1 100644
> --- a/arch/arm/mach-at91/gpio.c
> +++ b/arch/arm/mach-at91/gpio.c
> @@ -21,6 +21,7 @@
> #include <linux/module.h>
> #include <linux/io.h>
> #include <linux/irqdomain.h>
> +#include <linux/of_address.h>
>
> #include <mach/hardware.h>
> #include <mach/at91_pio.h>
> @@ -624,40 +625,139 @@ static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
> }
> }
>
> +#ifdef CONFIG_OF_GPIO
> +static void __init of_at91_gpio_init_one(struct device_node *np)
> +{
> + int alias_id;
> + struct at91_gpio_chip *at91_gpio;
> +
> + if (!np)
> + return;
> +
> + alias_id = of_alias_get_id(np, "gpio");
> + if (alias_id >= MAX_GPIO_BANKS) {
> + pr_err("at91_gpio, failed alias id(%d) > MAX_GPIO_BANKS(%d), ignoring.\n",
> + alias_id, MAX_GPIO_BANKS);
> + return;
> + }
> +
> + at91_gpio = &gpio_chip[alias_id];
> + at91_gpio->chip.base = alias_id * at91_gpio->chip.ngpio;
> +
> + at91_gpio->regbase = of_iomap(np, 0);
> + if (!at91_gpio->regbase) {
> + pr_err("at91_gpio.%d, failed to map registers, ignoring.\n",
> + alias_id);
> + return;
> + }
> +
> + /* Get the interrupts property */
> + if (of_property_read_u32(np, "interrupts", &at91_gpio->id)) {
> + pr_err("at91_gpio.%d, failed to get interrupts property, ignoring.\n",
> + alias_id);
> + goto ioremap_err;
> + }
> +
> + at91_gpio->clock = clk_get_sys(NULL, at91_gpio->chip.label);
> + if (!at91_gpio->clock) {
> + pr_err("at91_gpio.%d, failed to get clock, ignoring.\n",
> + alias_id);
> + goto ioremap_err;
> + }
> +
> + /* enable PIO controller's clock */
> + if(clk_enable(at91_gpio->clock)) {
> + pr_err("at91_gpio.%d, failed to enable clock, ignoring.\n",
> + alias_id);
> + goto clk_err;
> + }
> +
> + at91_gpio->chip.of_node = np;
> + gpio_banks = max(gpio_banks, alias_id + 1);
> + return;
> +
> +clk_err:
> + clk_put(at91_gpio->clock);
> +ioremap_err:
> + iounmap(at91_gpio->regbase);
> +}
> +
> +static int __init of_at91_gpio_init(void)
> +{
> + struct device_node *np = NULL;
> +
> + /*
> + * This isn't ideal, but it gets things hooked up until this
> + * driver is converted into a platform_device
> + */
> + for_each_compatible_node(np, NULL, "atmel,at91rm9200-gpio")
> + of_at91_gpio_init_one(np);
> +
> + return gpio_banks > 0 ? 0 : -EINVAL;
> +}
> +#else
> +static int __init of_at91_gpio_init(void)
> +{
> + return -EINVAL;
> +}
> +#endif
> +
> +static void __init at91_gpio_init_one(int i, u32 regbase, int id)
> +{
> + struct at91_gpio_chip *at91_gpio = &gpio_chip[i];
> +
> + at91_gpio->chip.base = i * at91_gpio->chip.ngpio;
> + at91_gpio->id = id;
> +
> + at91_gpio->regbase = ioremap(regbase, 512);
> + if (!at91_gpio->regbase) {
> + pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", i);
> + return;
> + }
> +
> + at91_gpio->clock = clk_get_sys(NULL, at91_gpio->chip.label);
> + if (!at91_gpio->clock) {
> + pr_err("at91_gpio.%d, failed to get clock, ignoring.\n", i);
> + goto ioremap_err;
> + }
> +
> + if(clk_enable(at91_gpio->clock)) {
> + pr_err("at91_gpio.%d, failed to enable clock, ignoring.\n", i);
> + goto clk_err;
> + }
> +
> + gpio_banks = max(gpio_banks, i + 1);
> + return;
> +
> +clk_err:
> + clk_put(at91_gpio->clock);
> +ioremap_err:
> + iounmap(at91_gpio->regbase);
> +}
> +
> /*
> * Called from the processor-specific init to enable GPIO pin support.
> */
> void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
> {
> - unsigned i;
> + unsigned i;
> struct at91_gpio_chip *at91_gpio, *last = NULL;
>
> BUG_ON(nr_banks > MAX_GPIO_BANKS);
>
> - gpio_banks = nr_banks;
> + if (of_at91_gpio_init() < 0) {
> + /* no GPIO controller found in device tree */
> + for (i = 0; i < nr_banks; i++)
> + at91_gpio_init_one(i, data[i].regbase, data[i].id);
> + }
>
> - for (i = 0; i < nr_banks; i++) {
> + for (i = 0; i < gpio_banks; i++) {
> at91_gpio = &gpio_chip[i];
>
> - at91_gpio->id = data[i].id;
> - at91_gpio->chip.base = i * 32;
> -
> - at91_gpio->regbase = ioremap(data[i].regbase, 512);
> - if (!at91_gpio->regbase) {
> - pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", i);
> - continue;
> - }
> -
> - at91_gpio->clock = clk_get_sys(NULL, at91_gpio->chip.label);
> - if (!at91_gpio->clock) {
> - pr_err("at91_gpio.%d, failed to get clock, ignoring.\n", i);
> - continue;
> - }
> -
> - /* enable PIO controller's clock */
> - clk_enable(at91_gpio->clock);
> -
> - /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
> + /*
> + * GPIO controller are grouped on some SoC:
> + * PIOC, PIOD and PIOE can share the same IRQ line
> + */
> if (last && last->id == at91_gpio->id)
> last->next = at91_gpio;
> last = at91_gpio;
> --
> 1.7.5.4
>
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
More information about the linux-arm-kernel
mailing list