[PATCH v2 06/10] arm/dts: OMAP3: Add i2c controller nodes

[Grant Likely]

On Fri, Dec 09, 2011 at 03:02:37PM +0100, Benoit Cousson wrote:
> Add i2c controllers nodes into the main ocp bus.
> 
> Signed-off-by: Benoit Cousson <b-cousson at ti.com>
> Cc: Grant Likely <grant.likely at secretlab.ca>
> Cc: Rob Herring <rob.herring at calxeda.com>

Acked-by: Grant Likely <grant.likely at secretlab.ca>

> ---
>  arch/arm/boot/dts/omap3.dtsi |   28 ++++++++++++++++++++++++++++
>  1 files changed, 28 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index 6866dc7..81d8e2c 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -61,5 +61,33 @@
>  			ti,intc-size = <96>;
>  			reg = <0x48200000 0x1000>;
>  		};
> +
> +		/*
> +		 * Flags for all i2c instances: 0x118
> +		 * APPLY_ERRATA_I207 | RESET_REGS_POSTIDLE | BUS_SHIFT_2
> +		 */
> +		i2c1: i2c at 1 {
> +			compatible = "ti,omap3-i2c";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			ti,hwmods = "i2c1";
> +			ti,flags = <0x118>;
> +		};
> +
> +		i2c2: i2c at 2 {
> +			compatible = "ti,omap3-i2c";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			ti,hwmods = "i2c2";
> +			ti,flags = <0x118>;
> +		};
> +
> +		i2c3: i2c at 3 {
> +			compatible = "ti,omap3-i2c";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			ti,hwmods = "i2c3";
> +			ti,flags = <0x118>;
> +		};
>  	};
>  };
> -- 
> 1.7.0.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel