[PATCH v3 2/3] ARM: mmp: enable pinmux in mmp platform

[Linus Walleij]

On Thu, Dec 22, 2011 at 9:17 AM, Haojian Zhuang
<haojian.zhuang at marvell.com> wrote:

> Configuring pinmux in brownstone, aspenite & ttc dkb platform. The functions
> of pins are initialized in platform driver.
>
> Signed-off-by: Haojian Zhuang <haojian.zhuang at marvell.com>

Deleting platform data and moving complex stuff to the pinctrl
subsystem where it belongs - great!

>        select CPU_MOHAWK
> +       select PINCTRL
> +       select PINMUX_PXA168

Will need to be renamed PINCTRL_PXA168 etc, sorry for the
painful renaming, just want to keep things consistent.

>        help
>          Select code specific to PXA168
>
>  config CPU_PXA910
>        bool
>        select CPU_MOHAWK
> +       select PINCTRL
> +       select PINMUX_PXA910

Here too.

>        help
>          Select code specific to PXA910
>
>  config CPU_MMP2
>        bool
>        select CPU_PJ4
> +       select PINCTRL
> +       select PINMUX_MMP2

Here too.

> +#define P168_CTRL              "pxa168-pinmux"
> +
> +static struct pinmux_map aspenite_pmx_map[] = {
> +       PINMUX_MAP_SYS_HOG("SSP1 SYSCLK", P168_CTRL, "ac97 sysclk"),
> +       PINMUX_MAP_SYS_HOG("SSP1 RX", P168_CTRL, "ssp1 rx"),
> +       PINMUX_MAP_SYS_HOG("SSP1 TX", P168_CTRL, "ssp1 tx"),
> +       PINMUX_MAP_SYS_HOG("DFIO", P168_CTRL, "dfio"),
> +       PINMUX_MAP_SYS_HOG("SMC CS0", P168_CTRL, "smc cs0"),
> +       PINMUX_MAP_SYS_HOG("SMC CS1", P168_CTRL, "smc cs1"),
> +       PINMUX_MAP_SYS_HOG("SMC RDY", P168_CTRL, "smc rdy"),
> +       PINMUX_MAP_SYS_HOG("SMC", P168_CTRL, "smc"),
> +       PINMUX_MAP_SYS_HOG("LCD", P168_CTRL, "lcd"),
> +       PINMUX_MAP_SYS_HOG("KP MKIN", P168_CTRL, "kpmkin"),
> +       PINMUX_MAP_SYS_HOG("KP MKOUT", P168_CTRL, "kpmkout"),
> +       PINMUX_MAP_SYS_HOG_GROUP("UART1 RX", P168_CTRL, "uart1 rx", "uart1rx-1"),
> +       PINMUX_MAP_SYS_HOG_GROUP("UART1 TX", P168_CTRL, "uart1 tx", "uart1tx-1"),
>  };

Excellent.

> -       mfp_config(ARRAY_AND_SIZE(common_pin_config));
> +       int ret;
> +
> +       ret = pinmux_register_mappings(ARRAY_AND_SIZE(aspenite_pmx_map));
> +       if (ret < 0)
> +               goto out;

Oh I never saw the ARRAY_AND_SIZE() macro before, cool!

Mostly same comments for the other board, thanks!

Yours,
Linus Walleij