[RFC v2 08/18] ARM: OMAP2+: AM33XX: hwmod: Fixup cpgmac0 hwmod entry

[Vaibhav Bedia]

The current HWMOD code expects the memory region with
the IP's SYSCONFIG register to be marked with ADDR_TYPE_RT
flag.

CPGMAC0 hwmod entry specifies two memory regions and marks
both with the flag ADDR_TYPE_RT although only the 2nd region
has the SYSCONFIG register. This leads to the HWMOD code
accessing the wrong memory address for idle and standby
operations. Fix this by removing the ADDR_TYPE_RT flag from
the 1st memory region in CPGMAC0 hwmod entry.

Signed-off-by: Vaibhav Bedia <vaibhav.bedia at ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar at ti.com>
Cc: Benoit Cousson <b-cousson at ti.com>
Cc: Paul Walmsley <paul at pwsan.com>
Cc: Kevin Hilman <khilman at deeprootsystems.com>
Cc: Vaibhav Hiremath <hvaibhav at ti.com>
---
v1->v2:
	Address review comments from Santosh and
	Vaibhav Hiremath. Previous discussion on the change
	is @ http://lists.infradead.org/pipermail/linux-arm-kernel/2012-November/129512.html

 arch/arm/mach-omap2/omap_hwmod_33xx_data.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 5c34d4b..863ce08 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -2496,7 +2496,6 @@ static struct omap_hwmod_addr_space am33xx_cpgmac0_addr_space[] = {
 	{
 		.pa_start	= 0x4a100000,
 		.pa_end		= 0x4a100000 + SZ_2K - 1,
-		.flags		= ADDR_TYPE_RT,
 	},
 	/* cpsw wr */
 	{
-- 
1.7.0.4