[PATCH 0/6 v12] gpio: Add block GPIO
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Sat Dec 29 05:20:17 EST 2012
On 17:49 Sun 23 Dec , Roland Stigge wrote:
> This set of patches adds:
>
> * Block GPIO API to gpiolib
> * Sysfs support for GPIO API, to provide userland access
> * Device interface for userland access (alternative to sysfs)
> * Devicetree support to instantiate GPIO blocks via DT
> * Example implementations in several gpio drivers since they need
> special accessor functions for block wise GPIO access (only for some
> selected drivers since the feature is optional and not suitable for
> all GPIO hardware)
> * Fix for race condition in gpiolib on device creation
>
> Signed-off-by: Roland Stigge <stigge at antcom.de>
> Tested by: Wolfgang Grandegger <wg at grandegger.com>
> --
>
> Testing branch available at: git://git.antcom.de/linux-2.6.git blockgpio
>
> Changes since v11:
> * Removed support for at91, since this one is currently in the migration
> process to pinctrl implementation
already done for 3.8
in Linus tree
Best Regards,
J.
> * Fixed mask setting via sysfs
> * Device interface: declare gpio_block_fop_poll() static
>
> Changes since v10:
> * gpioblock-of.c: Catch <1 specified GPIOs
> * gpioblock-of.c: Fixed memory leak in probe()'s error path
> * gpioblock-of.c: Fixed block node's refcount via of_node_put()
> * Added driver support for samsung, mm-lantiq and sa1100
> * Added driver support for at91 (by Wolfgang Grandegger)
> * Added pinctrl driver support for pinctl-nomadik
>
> Changed since v9:
> * Changed IRQ flags for device interface's poll() from IRQF_TRIGGER_FALLING
> to IRQF_SHARED
> * Use block name on gpio_request
> * Added spinlock for ISR manipulated data (dev interface / poll())
>
> Changed since v8:
> * Added poll() function to dev interface for IRQ handling
> * Fixed gpio_block_register() in case of missing CONFIG_GPIO_SYSFS
> * Fixed mask handling in sysfs interface
> * Fixed get_user/put_user pointer (cast)
>
> Changes since v7:
> * Fixed error in API documentation (name arg missing in prototype)
> * Fixed compile error if sysfs is missing: Moved gpio_block_is_output()
> out of sysfs-ifdef
> * Added error handling to gpio_block_register()
> * Added mask attribute to sysfs (although dev interface exists now)
>
> Changes since v6:
> * Changed realloc to list handling
> * Added mask to kernel API
> * Added device interface as userspace API
> * Changed sizeof() to BITS_PER_LONG
> * Fixed multiline comment style
> * Documented direction setting by the user
> * Documented order of handled chips in case of multiple chips in one block
>
> Changes since v5:
> * Documented sysfs: elaborated on "exported" and "values" attributes
> * Documented sysfs: gpiochip is a separate class now
> * Aggregated driver support patches for block gpio into one single patch
> * Added gpio block driver support for twl6040 and pch
>
> Changes since v4:
> * Documented word width
> * Bugfix: export/unexport on register/unregister
> * Using default dev_attrs for gpio_block_class
> * Fix gpiolib: race condition on device creation
> * Added driver support for ucb14500, vt8500, xilinx
>
> Changes since v3:
> * Added driver support for pca953x, em, pl061, max732x, pcf857x
> * Coding style improvements
> * Fixed krealloc memory leak in error case
> * sysfs: values in hex
> * Register blocks in a list
> * Narrowing lock scope
> * Use S_IWUSR and S_IRUGO instead of direct octal values
> * Use for_each_set_bit()
> * Change from unsigned to unsigned long for masks and values
>
> Changes since v2:
> * Added sysfs support
> * Added devicetree support
> * Added support for lpc32xx, generic
> * Added functions for GPIO block registration
> * Added more error checking
> * Bit remapping bugfix
>
> Changes since v1:
> * API change to 32/64 bit word, bit masks
>
> Thanks to Ryan Mallon, Linus Walleij, Stijn Devriendt, Jean-Christophe
> Plagniol-Villard, Mark Brown, Greg Kroah-Hartman, Grant Likely, Stefan
> Roese, Wolfgang Grandegger, Tobias Rutz, Fengguang Wu and Mark Rutland
> for reviewing and testing!
>
> Roland Stigge (6):
> gpio: Add a block GPIO API to gpiolib
> gpio: Add sysfs support to block GPIO API
> gpio: Add userland device interface to block GPIO
> gpiolib: Fix default attributes for class
> gpio: Add device tree support to block GPIO API
> gpio: Add block gpio to several gpio drivers
>
> Documentation/ABI/testing/dev-gpioblock | 34
> Documentation/ABI/testing/sysfs-gpio | 31
> Documentation/devicetree/bindings/gpio/gpio-block.txt | 36
> Documentation/gpio.txt | 58 +
> drivers/gpio/Makefile | 1
> drivers/gpio/gpio-em.c | 23
> drivers/gpio/gpio-generic.c | 56 +
> drivers/gpio/gpio-lpc32xx.c | 82 +
> drivers/gpio/gpio-max730x.c | 61 +
> drivers/gpio/gpio-max732x.c | 59 +
> drivers/gpio/gpio-mm-lantiq.c | 22
> drivers/gpio/gpio-pca953x.c | 64 +
> drivers/gpio/gpio-pcf857x.c | 24
> drivers/gpio/gpio-pch.c | 27
> drivers/gpio/gpio-pl061.c | 17
> drivers/gpio/gpio-sa1100.c | 20
> drivers/gpio/gpio-samsung.c | 31
> drivers/gpio/gpio-twl6040.c | 32
> drivers/gpio/gpio-ucb1400.c | 23
> drivers/gpio/gpio-vt8500.c | 24
> drivers/gpio/gpio-xilinx.c | 44 +
> drivers/gpio/gpioblock-of.c | 100 ++
> drivers/gpio/gpiolib.c | 782 ++++++++++++++++--
> drivers/pinctrl/pinctrl-nomadik.c | 36
> include/asm-generic/gpio.h | 28
> include/linux/gpio.h | 125 ++
> 26 files changed, 1793 insertions(+), 47 deletions(-)
More information about the linux-arm-kernel
mailing list