[PATCH] cpuidle: kirkwood: Move out of mach directory, add DT.
Andrew Lunn
andrew at lunn.ch
Fri Dec 28 09:35:17 EST 2012
On Fri, Dec 28, 2012 at 08:18:42AM -0600, Rob Herring wrote:
> On 12/28/2012 06:47 AM, Andrew Lunn wrote:
> > Move the Kirkwood cpuidle driver out of arch/arm/mach-kirkwood and
> > into drivers/cpuidle. Convert the driver into a platform driver and
> > add a device tree binding. Add a DT node to instantiate the driver for
> > boards converted to DT, and a platform data for old style boards.
>
> Is this an old comment? I don't see any platform data.
There is no platform data, since all the driver needs is an address of
the DDR control register. The code to create a platform device entry
is in common.c hunk.
>
> >
> > Signed-off-by: Andrew Lunn <andrew at lunn.ch>
> > ---
> > .../devicetree/bindings/power/qnap-poweroff.txt | 14 +++
> > arch/arm/boot/dts/kirkwood.dtsi | 5 +
> > arch/arm/configs/kirkwood_defconfig | 1 +
> > arch/arm/mach-kirkwood/Makefile | 1 -
> > arch/arm/mach-kirkwood/common.c | 23 ++++
> > arch/arm/mach-kirkwood/cpuidle.c | 73 -------------
> > arch/arm/mach-kirkwood/include/mach/kirkwood.h | 3 +-
> > drivers/cpuidle/Kconfig | 6 ++
> > drivers/cpuidle/Makefile | 1 +
> > drivers/cpuidle/cpuidle-kirkwood.c | 114 ++++++++++++++++++++
> > 10 files changed, 166 insertions(+), 75 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/power/qnap-poweroff.txt
> > delete mode 100644 arch/arm/mach-kirkwood/cpuidle.c
> > create mode 100644 drivers/cpuidle/cpuidle-kirkwood.c
> >
> > diff --git a/Documentation/devicetree/bindings/power/qnap-poweroff.txt b/Documentation/devicetree/bindings/power/qnap-poweroff.txt
> > new file mode 100644
> > index 0000000..e15a334
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/power/qnap-poweroff.txt
> > @@ -0,0 +1,14 @@
> > +* QNAP Power Off
>
> This doesn't match the rest of the patch.
Yep, does not belong here. It should be in one of the next patches.
> > --- a/arch/arm/boot/dts/kirkwood.dtsi
> > +++ b/arch/arm/boot/dts/kirkwood.dtsi
> > @@ -23,6 +23,11 @@
> > #address-cells = <1>;
> > #size-cells = <1>;
> >
> > + cpuidle at 1418 {
> > + compatible = "marvell,kirkwood-cpuidle";
> > + reg = <0x1418 0x4>;
> > + };
> > +
>
> This is describing what linux wants, not the hardware. This is a common
> problem with cpuidle drivers in that they use shared registers. I don't
> have a good solution, but this doesn't belong in DTS.
Do you have a bad solution?
I could just hard code the address, since its the same for all
kirkwood SoCs. Also, the register is not being used by any other
code on kirkwood, so its not shared.
>
> Rob
>
> > core_clk: core-clocks at 10030 {
> > compatible = "marvell,kirkwood-core-clock";
> > reg = <0x10030 0x4>;
> > diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
> > index 93f3794..13482ea 100644
> > --- a/arch/arm/configs/kirkwood_defconfig
> > +++ b/arch/arm/configs/kirkwood_defconfig
> > @@ -56,6 +56,7 @@ CONFIG_AEABI=y
> > CONFIG_ZBOOT_ROM_TEXT=0x0
> > CONFIG_ZBOOT_ROM_BSS=0x0
> > CONFIG_CPU_IDLE=y
> > +CONFIG_CPU_IDLE_KIRKWOOD=y
> > CONFIG_NET=y
> > CONFIG_PACKET=y
> > CONFIG_UNIX=y
> > diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
> > index 8d2e5a9..d665309 100644
> > --- a/arch/arm/mach-kirkwood/Makefile
> > +++ b/arch/arm/mach-kirkwood/Makefile
> > @@ -19,7 +19,6 @@ obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
> > obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
> > obj-$(CONFIG_MACH_T5325) += t5325-setup.o
> >
> > -obj-$(CONFIG_CPU_IDLE) += cpuidle.o
> > obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
> > obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
> > obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o
> > diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
> > index bac21a5..e8a2978 100644
> > --- a/arch/arm/mach-kirkwood/common.c
> > +++ b/arch/arm/mach-kirkwood/common.c
> > @@ -499,6 +499,28 @@ void __init kirkwood_wdt_init(void)
> > orion_wdt_init();
> > }
> >
> > +/*****************************************************************************
> > + * CPU idle
> > + ****************************************************************************/
> > +static struct resource kirkwood_cpuidle_resource[] = {
> > + {
> > + .flags = IORESOURCE_MEM,
> > + .start = DDR_OPERATION_BASE,
> > + .end = 3,
> > + },
> > +};
> > +
> > +static struct platform_device kirkwood_cpuidle = {
> > + .name = "kirkwood_cpuidle",
> > + .id = -1,
> > + .resource = kirkwood_cpuidle_resource,
> > + .num_resources = 1,
> > +};
> > +
> > +static void __init kirkwood_cpuidle_init(void)
> > +{
> > + platform_device_register(&kirkwood_cpuidle);
> > +}
> >
> > /*****************************************************************************
> > * Time handling
> > @@ -671,6 +693,7 @@ void __init kirkwood_init(void)
> > kirkwood_xor1_init();
> > kirkwood_crypto_init();
> >
> > + kirkwood_cpuidle_init();
> > #ifdef CONFIG_KEXEC
> > kexec_reinit = kirkwood_enable_pcie;
> > #endif
> > diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c
> > deleted file mode 100644
> > index f730467..0000000
> > --- a/arch/arm/mach-kirkwood/cpuidle.c
> > +++ /dev/null
> > @@ -1,73 +0,0 @@
> > -/*
> > - * arch/arm/mach-kirkwood/cpuidle.c
> > - *
> > - * CPU idle Marvell Kirkwood SoCs
> > - *
> > - * This file is licensed under the terms of the GNU General Public
> > - * License version 2. This program is licensed "as is" without any
> > - * warranty of any kind, whether express or implied.
> > - *
> > - * The cpu idle uses wait-for-interrupt and DDR self refresh in order
> > - * to implement two idle states -
> > - * #1 wait-for-interrupt
> > - * #2 wait-for-interrupt and DDR self refresh
> > - */
> > -
> > -#include <linux/kernel.h>
> > -#include <linux/init.h>
> > -#include <linux/platform_device.h>
> > -#include <linux/cpuidle.h>
> > -#include <linux/io.h>
> > -#include <linux/export.h>
> > -#include <asm/proc-fns.h>
> > -#include <asm/cpuidle.h>
> > -#include <mach/kirkwood.h>
> > -
> > -#define KIRKWOOD_MAX_STATES 2
> > -
> > -/* Actual code that puts the SoC in different idle states */
> > -static int kirkwood_enter_idle(struct cpuidle_device *dev,
> > - struct cpuidle_driver *drv,
> > - int index)
> > -{
> > - writel(0x7, DDR_OPERATION_BASE);
> > - cpu_do_idle();
> > -
> > - return index;
> > -}
> > -
> > -static struct cpuidle_driver kirkwood_idle_driver = {
> > - .name = "kirkwood_idle",
> > - .owner = THIS_MODULE,
> > - .en_core_tk_irqen = 1,
> > - .states[0] = ARM_CPUIDLE_WFI_STATE,
> > - .states[1] = {
> > - .enter = kirkwood_enter_idle,
> > - .exit_latency = 10,
> > - .target_residency = 100000,
> > - .flags = CPUIDLE_FLAG_TIME_VALID,
> > - .name = "DDR SR",
> > - .desc = "WFI and DDR Self Refresh",
> > - },
> > - .state_count = KIRKWOOD_MAX_STATES,
> > -};
> > -
> > -static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device);
> > -
> > -/* Initialize CPU idle by registering the idle states */
> > -static int kirkwood_init_cpuidle(void)
> > -{
> > - struct cpuidle_device *device;
> > -
> > - device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id());
> > - device->state_count = KIRKWOOD_MAX_STATES;
> > -
> > - cpuidle_register_driver(&kirkwood_idle_driver);
> > - if (cpuidle_register_device(device)) {
> > - pr_err("kirkwood_init_cpuidle: Failed registering\n");
> > - return -EIO;
> > - }
> > - return 0;
> > -}
> > -
> > -device_initcall(kirkwood_init_cpuidle);
> > diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
> > index 041653a..a05563a 100644
> > --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
> > +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
> > @@ -60,8 +60,9 @@
> > * Register Map
> > */
> > #define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000)
> > +#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
> > #define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE + 0x1500)
> > -#define DDR_OPERATION_BASE (DDR_VIRT_BASE + 0x1418)
> > +#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418)
> >
> > #define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000)
> > #define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000)
> > diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
> > index c4cc27e..071e2c3 100644
> > --- a/drivers/cpuidle/Kconfig
> > +++ b/drivers/cpuidle/Kconfig
> > @@ -39,4 +39,10 @@ config CPU_IDLE_CALXEDA
> > help
> > Select this to enable cpuidle on Calxeda processors.
> >
> > +config CPU_IDLE_KIRKWOOD
> > + bool "CPU Idle Driver for Kirkwood processors"
> > + depends on ARCH_KIRKWOOD
> > + help
> > + Select this to enable cpuidle on Kirkwood processors.
> > +
> > endif
> > diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
> > index 03ee874..24c6e7d 100644
> > --- a/drivers/cpuidle/Makefile
> > +++ b/drivers/cpuidle/Makefile
> > @@ -6,3 +6,4 @@ obj-y += cpuidle.o driver.o governor.o sysfs.o governors/
> > obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o
> >
> > obj-$(CONFIG_CPU_IDLE_CALXEDA) += cpuidle-calxeda.o
> > +obj-$(CONFIG_CPU_IDLE_KIRKWOOD) += cpuidle-kirkwood.o
> > diff --git a/drivers/cpuidle/cpuidle-kirkwood.c b/drivers/cpuidle/cpuidle-kirkwood.c
> > new file mode 100644
> > index 0000000..2d9d5b3
> > --- /dev/null
> > +++ b/drivers/cpuidle/cpuidle-kirkwood.c
> > @@ -0,0 +1,114 @@
> > +/*
> > + * arch/arm/mach-kirkwood/cpuidle.c
> > + *
> > + * CPU idle Marvell Kirkwood SoCs
> > + *
> > + * This file is licensed under the terms of the GNU General Public
> > + * License version 2. This program is licensed "as is" without any
> > + * warranty of any kind, whether express or implied.
> > + *
> > + * The cpu idle uses wait-for-interrupt and DDR self refresh in order
> > + * to implement two idle states -
> > + * #1 wait-for-interrupt
> > + * #2 wait-for-interrupt and DDR self refresh
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/init.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/cpuidle.h>
> > +#include <linux/io.h>
> > +#include <linux/export.h>
> > +#include <linux/of.h>
> > +#include <asm/proc-fns.h>
> > +#include <asm/cpuidle.h>
> > +
> > +#define KIRKWOOD_MAX_STATES 2
> > +
> > +static void __iomem *ddr_operation_base;
> > +
> > +/* Actual code that puts the SoC in different idle states */
> > +static int kirkwood_enter_idle(struct cpuidle_device *dev,
> > + struct cpuidle_driver *drv,
> > + int index)
> > +{
> > + writel(0x7, ddr_operation_base);
> > + cpu_do_idle();
> > +
> > + return index;
> > +}
> > +
> > +static struct cpuidle_driver kirkwood_idle_driver = {
> > + .name = "kirkwood_idle",
> > + .owner = THIS_MODULE,
> > + .en_core_tk_irqen = 1,
> > + .states[0] = ARM_CPUIDLE_WFI_STATE,
> > + .states[1] = {
> > + .enter = kirkwood_enter_idle,
> > + .exit_latency = 10,
> > + .target_residency = 100000,
> > + .flags = CPUIDLE_FLAG_TIME_VALID,
> > + .name = "DDR SR",
> > + .desc = "WFI and DDR Self Refresh",
> > + },
> > + .state_count = KIRKWOOD_MAX_STATES,
> > +};
> > +static struct cpuidle_device *device;
> > +
> > +static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device);
> > +
> > +/* Initialize CPU idle by registering the idle states */
> > +static int kirkwood_cpuidle_probe(struct platform_device *pdev)
> > +{
> > + struct resource *res;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + if (res == NULL)
> > + return -EINVAL;
> > +
> > + ddr_operation_base = devm_ioremap(&pdev->dev, res->start,
> > + resource_size(res));
> > + if (ddr_operation_base == NULL)
> > + return -EINVAL;
> > +
> > + device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id());
> > + device->state_count = KIRKWOOD_MAX_STATES;
> > +
> > + cpuidle_register_driver(&kirkwood_idle_driver);
> > + if (cpuidle_register_device(device)) {
> > + pr_err("kirkwood_init_cpuidle: Failed registering\n");
> > + return -EIO;
> > + }
> > + return 0;
> > +}
> > +
> > +int kirkwood_cpuidle_remove(struct platform_device *pdev)
> > +{
> > + cpuidle_unregister_device(device);
> > + cpuidle_unregister_driver(&kirkwood_idle_driver);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id of_kirkwood_cpuidle_match[] = {
> > + { .compatible = "marvell,kirkwood-cpuidle", },
> > + {},
> > +};
> > +
> > +static struct platform_driver kirkwood_cpuidle_driver = {
> > + .probe = kirkwood_cpuidle_probe,
> > + .remove = __devexit_p(kirkwood_cpuidle_remove),
> > + .driver = {
> > + .name = "kirkwood_cpuidle",
> > + .owner = THIS_MODULE,
> > + .of_match_table = of_kirkwood_cpuidle_match,
> > + },
> > +};
> > +
> > +module_platform_driver(kirkwood_cpuidle_driver);
> > +
> > +MODULE_AUTHOR("Andrew Lunn <andrew at lunn.ch>");
> > +MODULE_DESCRIPTION("Kirkwood cpu idle driver");
> > +MODULE_LICENSE("GPLv2");
> > +MODULE_ALIAS("platform:kirkwood-cpuidle");
> >
>
More information about the linux-arm-kernel
mailing list