[PATCH] ARM: dts: imx23-olinuxino: Fix IOMUX settings

[Shawn Guo]

On Mon, Dec 24, 2012 at 04:01:39PM -0200, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> On the imx23-olinuxino board GPIO2_1 is connected to the LED and GPIO0_17
> is the USB PHY reset.
> 
> So make the IOMUX assignment properly.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Applied, thanks.

Shawn