[PATCH 2/9] crypto: omap-sham - Convert to use pm_runtime API
Mark A. Greer
mgreer at animalcreek.com
Fri Dec 21 12:04:02 EST 2012
From: "Mark A. Greer" <mgreer at animalcreek.com>
Convert the omap-sham crypto driver to use the
pm_runtime API instead of the clk API.
CC: Kevin Hilman <khilman at deeprootsystems.com>
CC: Dmitry Kasatkin <dmitry.kasatkin at intel.com>
Signed-off-by: Mark A. Greer <mgreer at animalcreek.com>
---
drivers/crypto/omap-sham.c | 28 +++++++++++-----------------
1 file changed, 11 insertions(+), 17 deletions(-)
diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index 2df7a54..777eb9f 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -22,12 +22,12 @@
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
-#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/scatterlist.h>
#include <linux/dma-mapping.h>
+#include <linux/pm_runtime.h>
#include <linux/delay.h>
#include <linux/crypto.h>
#include <linux/cryptohash.h>
@@ -140,7 +140,6 @@ struct omap_sham_dev {
struct device *dev;
void __iomem *io_base;
int irq;
- struct clk *iclk;
spinlock_t lock;
int err;
int dma;
@@ -237,7 +236,7 @@ static void omap_sham_copy_ready_hash(struct ahash_request *req)
static int omap_sham_hw_init(struct omap_sham_dev *dd)
{
- clk_enable(dd->iclk);
+ pm_runtime_get_sync(dd->dev);
if (!test_bit(FLAGS_INIT, &dd->flags)) {
omap_sham_write_mask(dd, SHA_REG_MASK,
@@ -652,7 +651,8 @@ static void omap_sham_finish_req(struct ahash_request *req, int err)
/* atomic operation is not needed here */
dd->flags &= ~(BIT(FLAGS_BUSY) | BIT(FLAGS_FINAL) | BIT(FLAGS_CPU) |
BIT(FLAGS_DMA_READY) | BIT(FLAGS_OUTPUT_READY));
- clk_disable(dd->iclk);
+
+ pm_runtime_put_sync(dd->dev);
if (req->base.complete)
req->base.complete(&req->base, err);
@@ -1197,14 +1197,6 @@ static int __devinit omap_sham_probe(struct platform_device *pdev)
if (err)
goto dma_err;
- /* Initializing the clock */
- dd->iclk = clk_get(dev, "ick");
- if (IS_ERR(dd->iclk)) {
- dev_err(dev, "clock intialization failed.\n");
- err = PTR_ERR(dd->iclk);
- goto clk_err;
- }
-
dd->io_base = ioremap(dd->phys_base, SZ_4K);
if (!dd->io_base) {
dev_err(dev, "can't ioremap\n");
@@ -1212,11 +1204,14 @@ static int __devinit omap_sham_probe(struct platform_device *pdev)
goto io_err;
}
- clk_enable(dd->iclk);
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
+
dev_info(dev, "hw accel on OMAP rev %u.%u\n",
(omap_sham_read(dd, SHA_REG_REV) & SHA_REG_REV_MAJOR) >> 4,
omap_sham_read(dd, SHA_REG_REV) & SHA_REG_REV_MINOR);
- clk_disable(dd->iclk);
+
+ pm_runtime_put_sync(&pdev->dev);
spin_lock(&sham.lock);
list_add_tail(&dd->list, &sham.dev_list);
@@ -1234,9 +1229,8 @@ err_algs:
for (j = 0; j < i; j++)
crypto_unregister_ahash(&algs[j]);
iounmap(dd->io_base);
+ pm_runtime_disable(dev);
io_err:
- clk_put(dd->iclk);
-clk_err:
omap_sham_dma_cleanup(dd);
dma_err:
if (dd->irq >= 0)
@@ -1265,7 +1259,7 @@ static int __devexit omap_sham_remove(struct platform_device *pdev)
crypto_unregister_ahash(&algs[i]);
tasklet_kill(&dd->done_task);
iounmap(dd->io_base);
- clk_put(dd->iclk);
+ pm_runtime_disable(&pdev->dev);
omap_sham_dma_cleanup(dd);
if (dd->irq >= 0)
free_irq(dd->irq, dd);
--
1.7.12
More information about the linux-arm-kernel
mailing list