[PATCH 6/8] ARM: OMAP2+: Disable code that currently does not work with multiplaform

[Tony Lindgren]

We still need to fix up few places for multiplatform support,
but that can proceed separately. Fix the issue by making the
problem drivers depends !ARCH_MULTIPLATFORM for now.

The remaining pieces that are not multiplatform compatible
for omap2+ SoCs are:

1. Some drivers are using custom omap_dm_timer calls

There are two drivers that are directly usign omap hardware
timers for PWM and DSP clocking: drivers/media/rc/ir-rx51.c and
drivers/staging/tidspbridge/core/dsp-clock.c. These can be
fixed for multiplatform by allowing a minimal set of hardware
timers to be accessed, and for some functionality by using the
hrtimer framework.

2. Hardware OMAP4_ERRATA_I688 needs to be fixed up

This can't be enabled for multiplatform configurations in
it's current form. It may be possible to fix it up to do
instruction replacement early on during init. Luckily it
looks like this errata does not seem to get hit with
mainline kernel code alone at least currently.

3. Legacy header needed for omap-sham.c

Looks like it still needs mach/irqs.h for omap1 that
does not exist for multiplatform systems. Just ifdef
it for now.

Cc: Timo Kokkonen <timo.t.kokkonen at iki.fi>
Cc: Sean Young <sean at mess.org>
Cc: "Víctor Manuel Jáquez Leal" <vjaquez at igalia.com>
Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab at redhat.com>
Cc: Omar Ramirez Luna <omar.ramirez at ti.com>
Cc: Herbert Xu <herbert at gondor.apana.org.au>
Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
 arch/arm/mach-omap2/Kconfig         |    2 +-
 drivers/crypto/omap-sham.c          |    3 +++
 drivers/media/rc/Kconfig            |    2 +-
 drivers/staging/tidspbridge/Kconfig |    2 +-
 4 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 41b581f..492d764 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -397,7 +397,7 @@ config OMAP3_SDRC_AC_TIMING
 
 config OMAP4_ERRATA_I688
 	bool "OMAP4 errata: Async Bridge Corruption"
-	depends on ARCH_OMAP4
+	depends on ARCH_OMAP4 && !ARCH_MULTIPLATFORM
 	select ARCH_HAS_BARRIERS
 	help
 	  If a data is stalled inside asynchronous bridge because of back
diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index 1d75e6f..d65f22c 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -38,7 +38,10 @@
 #include <crypto/internal/hash.h>
 
 #include <linux/omap-dma.h>
+
+#ifdef CONFIG_ARCH_OMAP1
 #include <mach/irqs.h>
+#endif
 
 #define SHA_REG_DIGEST(x)		(0x00 + ((x) * 0x04))
 #define SHA_REG_DIN(x)			(0x1C + ((x) * 0x04))
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 79ba242..19f3563 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -291,7 +291,7 @@ config IR_TTUSBIR
 
 config IR_RX51
 	tristate "Nokia N900 IR transmitter diode"
-	depends on OMAP_DM_TIMER && LIRC
+	depends on OMAP_DM_TIMER && LIRC && !ARCH_MULTIPLATFORM
 	---help---
 	   Say Y or M here if you want to enable support for the IR
 	   transmitter diode built in the Nokia N900 (RX51) device.
diff --git a/drivers/staging/tidspbridge/Kconfig b/drivers/staging/tidspbridge/Kconfig
index 0dd479f..60848f1 100644
--- a/drivers/staging/tidspbridge/Kconfig
+++ b/drivers/staging/tidspbridge/Kconfig
@@ -4,7 +4,7 @@
 
 menuconfig TIDSPBRIDGE
 	tristate "DSP Bridge driver"
-	depends on ARCH_OMAP3
+	depends on ARCH_OMAP3 && !ARCH_MULTIPLATFORM
 	select OMAP_MBOX_FWK
 	help
 	  DSP/BIOS Bridge is designed for platforms that contain a GPP and