[PATCH 4/4] clk: zynq: Use of_init_clk_data()

[Stephen Boyd]

On 12/19/12 09:26, Josh Cartwright wrote:
> On Mon, Dec 17, 2012 at 01:02:15PM -0800, Stephen Boyd wrote:
>> Reduce lines of code and simplify this driver by using the
>> generic clock binding parsing function. This also fixes a bug
>> where the 'flags' member of the init struct is not initialized.
>>
>> Signed-off-by: Stephen Boyd <sboyd at codeaurora.org>
>> Cc: Josh Cartwright <josh.cartwright at ni.com>
>> Cc: Soren Brinkmann <soren.brinkmann at xilinx.com>
>> ---
>>  drivers/clk/clk-zynq.c | 28 +++++++++-------------------
>>  1 file changed, 9 insertions(+), 19 deletions(-)
> Stephen-
>
> Is there a particular tree I should be testing this against?  Booting this set
> on top of linus/master gives me:

I based the patches off of linux-next-20121217 although it seems like it
applied fine for you on linus/master.

>    ------------[ cut here ]------------
>    WARNING: at drivers/clk/clk-zynq.c:159 zynq_periph_clk_setup+0x190/0x248()
>    [<c000d814>] (unwind_backtrace+0x0/0xf8) from [<c0016808>] (warn_slowpath_common+0x50/0x60)
>    [<c0016808>] (warn_slowpath_common+0x50/0x60) from [<c00168e0>] (warn_slowpath_null+0x1c/0x24)
>    [<c00168e0>] (warn_slowpath_null+0x1c/0x24) from [<c0193520>] (zynq_periph_clk_setup+0x190/0x248)
>    [<c0193520>] (zynq_periph_clk_setup+0x190/0x248) from [<c0192944>] (of_clk_init+0x30/0x58)
>    [<c0192944>] (of_clk_init+0x30/0x58) from [<c0189708>] (xilinx_zynq_timer_init+0x40/0x48)
>    [<c0189708>] (xilinx_zynq_timer_init+0x40/0x48) from [<c0185d54>] (time_init+0x28/0x30)
>    [<c0185d54>] (time_init+0x28/0x30) from [<c0183650>] (start_kernel+0x1a8/0x2c0)
>    [<c0183650>] (start_kernel+0x1a8/0x2c0) from [<00008074>] (0x8074)
>    ---[ end trace 1b75b31a2719ed1c ]---
>    ------------[ cut here ]------------
>    WARNING: at drivers/clk/clk-zynq.c:296 zynq_cpu_clk_setup+0x1e0/0x26c()
>    [<c000d814>] (unwind_backtrace+0x0/0xf8) from [<c0016808>] (warn_slowpath_common+0x50/0x60)
>    [<c0016808>] (warn_slowpath_common+0x50/0x60) from [<c00168e0>] (warn_slowpath_null+0x1c/0x24)
>    [<c00168e0>] (warn_slowpath_null+0x1c/0x24) from [<c0193304>] (zynq_cpu_clk_setup+0x1e0/0x26c)
>    [<c0193304>] (zynq_cpu_clk_setup+0x1e0/0x26c) from [<c0192944>] (of_clk_init+0x30/0x58)
>    [<c0192944>] (of_clk_init+0x30/0x58) from [<c0189708>] (xilinx_zynq_timer_init+0x40/0x48)
>    [<c0189708>] (xilinx_zynq_timer_init+0x40/0x48) from [<c0185d54>] (time_init+0x28/0x30)
>    [<c0185d54>] (time_init+0x28/0x30) from [<c0183650>] (start_kernel+0x1a8/0x2c0)
>    [<c0183650>] (start_kernel+0x1a8/0x2c0) from [<00008074>] (0x8074)
>    ---[ end trace 1b75b31a2719ed1d ]---
>    ------------[ cut here ]------------
>    WARNING: at drivers/clk/clk-zynq.c:347 zynq_cpu_clk_setup+0x210/0x26c()
>    [<c000d814>] (unwind_backtrace+0x0/0xf8) from [<c0016808>] (warn_slowpath_common+0x50/0x60)
>    [<c0016808>] (warn_slowpath_common+0x50/0x60) from [<c00168e0>] (warn_slowpath_null+0x1c/0x24)
>    [<c00168e0>] (warn_slowpath_null+0x1c/0x24) from [<c0193334>] (zynq_cpu_clk_setup+0x210/0x26c)
>    [<c0193334>] (zynq_cpu_clk_setup+0x210/0x26c) from [<c0192944>] (of_clk_init+0x30/0x58)
>    [<c0192944>] (of_clk_init+0x30/0x58) from [<c0189708>] (xilinx_zynq_timer_init+0x40/0x48)
>    [<c0189708>] (xilinx_zynq_timer_init+0x40/0x48) from [<c0185d54>] (time_init+0x28/0x30)
>    [<c0185d54>] (time_init+0x28/0x30) from [<c0183650>] (start_kernel+0x1a8/0x2c0)
>    [<c0183650>] (start_kernel+0x1a8/0x2c0) from [<00008074>] (0x8074)
>    ---[ end trace 1b75b31a2719ed1e ]---

Can you show the code at those line numbers? There are quite a few
WARN_ONs in that code and it's possible the WARN_ON is the one
introduced in this patch.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation