[PATCH v2 4/7] arm: zynq: timer: Align columns

[Soren Brinkmann]

Aligning the columns in a block of #defines, so that the values
are starting in the same colum on every line.

Signed-off-by: Soren Brinkmann <soren.brinkmann at xilinx.com>
Reviewed-by: Josh Cartwright <josh.cartwright at ni.com>
---
 arch/arm/mach-zynq/timer.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c
index 80bf474..4b81ae1 100644
--- a/arch/arm/mach-zynq/timer.c
+++ b/arch/arm/mach-zynq/timer.c
@@ -35,9 +35,9 @@
  * Timer Register Offset Definitions of Timer 1, Increment base address by 4
  * and use same offsets for Timer 2
  */
-#define XTTCPS_CLK_CNTRL_OFFSET	0x00 /* Clock Control Reg, RW */
-#define XTTCPS_CNT_CNTRL_OFFSET	0x0C /* Counter Control Reg, RW */
-#define XTTCPS_COUNT_VAL_OFFSET	0x18 /* Counter Value Reg, RO */
+#define XTTCPS_CLK_CNTRL_OFFSET		0x00 /* Clock Control Reg, RW */
+#define XTTCPS_CNT_CNTRL_OFFSET		0x0C /* Counter Control Reg, RW */
+#define XTTCPS_COUNT_VAL_OFFSET		0x18 /* Counter Value Reg, RO */
 #define XTTCPS_INTR_VAL_OFFSET		0x24 /* Interval Count Reg, RW */
 #define XTTCPS_ISR_OFFSET		0x54 /* Interrupt Status Reg, RO */
 #define XTTCPS_IER_OFFSET		0x60 /* Interrupt Enable Reg, RW */
-- 
1.8.0.2