[PATCH 12/18] arm: kirkwood: dreamplug: use Device Tree to probe SDIO

[Andrew Lunn]

On Tue, Dec 18, 2012 at 03:33:57PM +0100, Thomas Petazzoni wrote:
> Now that the mvsdio driver has a Device Tree binding, and the SDIO
> controller is declared in kirkwood.dtsi, migrate the dreamplug board
> to use the Device Tree to probe the SDIO controller.

Hi Thomas

It would be nice to add pinctrl to this. The likely pins are defined
in kirkwood-6281.dtsi. dreamplug does not define hogs for these pins,
so its relying on grub setting them up and nothing changing them.

Maybe Jason can do this?

 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
> Cc: Jason Cooper <jason at lakedaemon.net>
> ---
>  arch/arm/boot/dts/kirkwood-dreamplug.dts |    5 +++++
>  arch/arm/mach-kirkwood/board-dreamplug.c |    5 -----
>  2 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
> index f2d386c..0fceb76 100644
> --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
> +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
> @@ -74,6 +74,11 @@
>  			status = "okay";
>  			nr-ports = <1>;
>  		};
> +
> +		mvsdio at 90000 {
> +			status = "okay";
> +			/* No CD or WP GPIOs */
> +		};
>  	};
>  
>  	gpio-leds {
> diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
> index 08248e2..b712b7f 100644
> --- a/arch/arm/mach-kirkwood/board-dreamplug.c
> +++ b/arch/arm/mach-kirkwood/board-dreamplug.c

There is probably a header file which can be removed as well.

Thanks
	Andrew


> @@ -26,10 +26,6 @@ static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
>  	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
>  };
>  
> -static struct mvsdio_platform_data dreamplug_mvsdio_data = {
> -	/* unfortunately the CD signal has not been connected */
> -};
> -
>  void __init dreamplug_init(void)
>  {
>  	/*
> @@ -37,5 +33,4 @@ void __init dreamplug_init(void)
>  	 */
>  	kirkwood_ge00_init(&dreamplug_ge00_data);
>  	kirkwood_ge01_init(&dreamplug_ge01_data);
> -	kirkwood_sdio_init(&dreamplug_mvsdio_data);
>  }
> -- 
> 1.7.9.5
>