[PATCH V2] spi: remove check for bits_per_word on transfer from low level driver
Laxman Dewangan
ldewangan at nvidia.com
Tue Dec 18 03:55:43 EST 2012
The spi core make sure that each transfer structure have the proper
setting for bits_per_word before calling low level transfer APIs.
Hence it is no more require to check again in low level driver for
this field whether this is set correct or not. Removing such code
from low level driver.
Signed-off-by: Laxman Dewangan <ldewangan at nvidia.com>
---
This is the continuation of feedback got from Jonas on
change
spi: make sure all transfer has bits_per_word set
where I made the change in only tegra slink driver.
This patch remove the similar code form all drivers.
Changes from V1:
- No change in code.
- Description is rewritten to match with the change.
drivers/spi/spi-altera.c | 2 +-
drivers/spi/spi-bfin-sport.c | 3 +--
drivers/spi/spi-bfin5xx.c | 3 +--
drivers/spi/spi-bitbang.c | 6 +++---
drivers/spi/spi-clps711x.c | 2 +-
drivers/spi/spi-coldfire-qspi.c | 3 +--
drivers/spi/spi-ep93xx.c | 2 +-
drivers/spi/spi-s3c64xx.c | 2 +-
drivers/spi/spi-sirf.c | 3 +--
drivers/spi/spi-tegra20-slink.c | 9 +++------
drivers/spi/spi-txx9.c | 6 ++----
11 files changed, 16 insertions(+), 25 deletions(-)
diff --git a/drivers/spi/spi-altera.c b/drivers/spi/spi-altera.c
index 5e7314a..a537f8d 100644
--- a/drivers/spi/spi-altera.c
+++ b/drivers/spi/spi-altera.c
@@ -134,7 +134,7 @@ static int altera_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
hw->tx = t->tx_buf;
hw->rx = t->rx_buf;
hw->count = 0;
- hw->bytes_per_word = (t->bits_per_word ? : spi->bits_per_word) / 8;
+ hw->bytes_per_word = t->bits_per_word / 8;
hw->len = t->len / hw->bytes_per_word;
if (hw->irq >= 0) {
diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c
index ac7ffca..39b0d17 100644
--- a/drivers/spi/spi-bfin-sport.c
+++ b/drivers/spi/spi-bfin-sport.c
@@ -416,8 +416,7 @@ bfin_sport_spi_pump_transfers(unsigned long data)
drv_data->cs_change = transfer->cs_change;
/* Bits per word setup */
- bits_per_word = transfer->bits_per_word ? :
- message->spi->bits_per_word ? : 8;
+ bits_per_word = transfer->bits_per_word;
if (bits_per_word % 16 == 0)
drv_data->ops = &bfin_sport_transfer_ops_u16;
else
diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c
index 0429d83..7d7c991 100644
--- a/drivers/spi/spi-bfin5xx.c
+++ b/drivers/spi/spi-bfin5xx.c
@@ -642,8 +642,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
drv_data->cs_change = transfer->cs_change;
/* Bits per word setup */
- bits_per_word = transfer->bits_per_word ? :
- message->spi->bits_per_word ? : 8;
+ bits_per_word = transfer->bits_per_word;
if (bits_per_word % 16 == 0) {
drv_data->n_bytes = bits_per_word/8;
drv_data->len = (transfer->len) >> 1;
diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index 8b3d8ef..61beaec 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -69,7 +69,7 @@ static unsigned bitbang_txrx_8(
unsigned ns,
struct spi_transfer *t
) {
- unsigned bits = t->bits_per_word ? : spi->bits_per_word;
+ unsigned bits = t->bits_per_word;
unsigned count = t->len;
const u8 *tx = t->tx_buf;
u8 *rx = t->rx_buf;
@@ -95,7 +95,7 @@ static unsigned bitbang_txrx_16(
unsigned ns,
struct spi_transfer *t
) {
- unsigned bits = t->bits_per_word ? : spi->bits_per_word;
+ unsigned bits = t->bits_per_word;
unsigned count = t->len;
const u16 *tx = t->tx_buf;
u16 *rx = t->rx_buf;
@@ -121,7 +121,7 @@ static unsigned bitbang_txrx_32(
unsigned ns,
struct spi_transfer *t
) {
- unsigned bits = t->bits_per_word ? : spi->bits_per_word;
+ unsigned bits = t->bits_per_word;
unsigned count = t->len;
const u32 *tx = t->tx_buf;
u32 *rx = t->rx_buf;
diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c
index 1366c46..a11cbf0 100644
--- a/drivers/spi/spi-clps711x.c
+++ b/drivers/spi/spi-clps711x.c
@@ -68,7 +68,7 @@ static int spi_clps711x_setup_xfer(struct spi_device *spi,
struct spi_transfer *xfer)
{
u32 speed = xfer->speed_hz ? : spi->max_speed_hz;
- u8 bpw = xfer->bits_per_word ? : spi->bits_per_word;
+ u8 bpw = xfer->bits_per_word;
struct spi_clps711x_data *hw = spi_master_get_devdata(spi->master);
if (bpw != 8) {
diff --git a/drivers/spi/spi-coldfire-qspi.c b/drivers/spi/spi-coldfire-qspi.c
index 58466b8..7b5cc9e 100644
--- a/drivers/spi/spi-coldfire-qspi.c
+++ b/drivers/spi/spi-coldfire-qspi.c
@@ -329,8 +329,7 @@ static int mcfqspi_transfer_one_message(struct spi_master *master,
mcfqspi_cs_select(mcfqspi, spi->chip_select, cs_high);
mcfqspi_wr_qir(mcfqspi, MCFQSPI_QIR_SPIFE);
- if ((t->bits_per_word ? t->bits_per_word :
- spi->bits_per_word) == 8)
+ if (t->bits_per_word == 8)
mcfqspi_transfer_msg8(mcfqspi, t->len, t->tx_buf,
t->rx_buf);
else
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index acb1e19..aecbff1 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -446,7 +446,7 @@ static inline int bits_per_word(const struct ep93xx_spi *espi)
struct spi_message *msg = espi->current_msg;
struct spi_transfer *t = msg->state;
- return t->bits_per_word ? t->bits_per_word : msg->spi->bits_per_word;
+ return t->bits_per_word;
}
static void ep93xx_do_write(struct ep93xx_spi *espi, struct spi_transfer *t)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 4dd7b7c..ab0c0e4 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -697,7 +697,7 @@ static int s3c64xx_spi_transfer_one_message(struct spi_master *master,
INIT_COMPLETION(sdd->xfer_completion);
/* Only BPW and Speed may change across transfers */
- bpw = xfer->bits_per_word ? : spi->bits_per_word;
+ bpw = xfer->bits_per_word;
speed = xfer->speed_hz ? : spi->max_speed_hz;
if (xfer->len % (bpw / 8)) {
diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c
index e0f43a5..7506667 100644
--- a/drivers/spi/spi-sirf.c
+++ b/drivers/spi/spi-sirf.c
@@ -382,8 +382,7 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
sspi = spi_master_get_devdata(spi->master);
- bits_per_word = t && t->bits_per_word ? t->bits_per_word :
- spi->bits_per_word;
+ bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
hz = t && t->speed_hz ? t->speed_hz : spi->max_speed_hz;
/* Enable IO mode for RX, TX */
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 651167f..7a95bdd 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -284,8 +284,7 @@ static unsigned tegra_slink_calculate_curr_xfer_param(
unsigned max_len;
unsigned total_fifo_words;
- bits_per_word = t->bits_per_word ? t->bits_per_word :
- spi->bits_per_word;
+ bits_per_word = t->bits_per_word;
tspi->bytes_per_word = (bits_per_word - 1) / 8 + 1;
if (bits_per_word == 8 || bits_per_word == 16) {
@@ -378,8 +377,7 @@ static unsigned int tegra_slink_read_rx_fifo_to_client_rxbuf(
} else {
unsigned int bits_per_word;
- bits_per_word = t->bits_per_word ? t->bits_per_word :
- tspi->cur_spi->bits_per_word;
+ bits_per_word = t->bits_per_word;
for (count = 0; count < rx_full_count; count++) {
x = tegra_slink_readl(tspi, SLINK_RX_FIFO);
for (i = 0; (i < tspi->bytes_per_word); i++)
@@ -444,8 +442,7 @@ static void tegra_slink_copy_spi_rxbuf_to_client_rxbuf(
unsigned int x;
unsigned int rx_mask, bits_per_word;
- bits_per_word = t->bits_per_word ? t->bits_per_word :
- tspi->cur_spi->bits_per_word;
+ bits_per_word = t->bits_per_word;
rx_mask = (1 << bits_per_word) - 1;
for (count = 0; count < tspi->curr_dma_words; count++) {
x = tspi->rx_dma_buf[count];
diff --git a/drivers/spi/spi-txx9.c b/drivers/spi/spi-txx9.c
index d5a3cbb..550b5f4 100644
--- a/drivers/spi/spi-txx9.c
+++ b/drivers/spi/spi-txx9.c
@@ -189,9 +189,8 @@ static void txx9spi_work_one(struct txx9spi *c, struct spi_message *m)
unsigned int len = t->len;
unsigned int wsize;
u32 speed_hz = t->speed_hz ? : spi->max_speed_hz;
- u8 bits_per_word = t->bits_per_word ? : spi->bits_per_word;
+ u8 bits_per_word = t->bits_per_word;
- bits_per_word = bits_per_word ? : 8;
wsize = bits_per_word >> 3; /* in bytes */
if (prev_speed_hz != speed_hz
@@ -316,9 +315,8 @@ static int txx9spi_transfer(struct spi_device *spi, struct spi_message *m)
/* check each transfer's parameters */
list_for_each_entry (t, &m->transfers, transfer_list) {
u32 speed_hz = t->speed_hz ? : spi->max_speed_hz;
- u8 bits_per_word = t->bits_per_word ? : spi->bits_per_word;
+ u8 bits_per_word = t->bits_per_word;
- bits_per_word = bits_per_word ? : 8;
if (!t->tx_buf && !t->rx_buf && t->len)
return -EINVAL;
if (bits_per_word != 8 && bits_per_word != 16)
--
1.7.1.1
More information about the linux-arm-kernel
mailing list