[PATCH 1/2] thermal: Add support for thermal sensor for Orion SoC

Nobuhiro Iwamatsu iwamatsu at nigauri.org
Fri Dec 14 16:54:17 EST 2012


Hi,

Thanks you for your work.
Sorry, I dont hava a time at this week about this.

On Fri, Dec 14, 2012 at 8:03 PM, Andrew Lunn <andrew at lunn.ch> wrote:
> From: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
>
> Some Orion SoC has thermal sensor.
> This patch adds support for 88F6282 and 88F6283.
>
> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
> Signed-off-by: Andrew Lunn <andrew at lunn.ch>
> ---
>  .../devicetree/bindings/thermal/orion-thermal.txt  |   16 +++
>  drivers/thermal/Kconfig                            |    7 ++
>  drivers/thermal/Makefile                           |    1 +
>  drivers/thermal/orion_thermal.c                    |  133 ++++++++++++++++++++
>  4 files changed, 157 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/orion-thermal.txt
>  create mode 100644 drivers/thermal/orion_thermal.c
>
> diff --git a/Documentation/devicetree/bindings/thermal/orion-thermal.txt b/Documentation/devicetree/bindings/thermal/orion-thermal.txt
> new file mode 100644
> index 0000000..5ce925d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/orion-thermal.txt
> @@ -0,0 +1,16 @@
> +* Orion Thermal
> +
> +This initial version is for Kirkwood 88F8262 & 88F6283 SoCs, however
> +it is expected the driver will sometime in the future be expanded to
> +also support Dove, using a different compatibility string.
> +
> +Required properties:
> +- compatible : "marvell,kirkwood-thermal"
> +- reg : Address range of the thermal registers
> +
> +Example:
> +
> +       thermal at 10078 {
> +               compatible = "marvell,kirkwood";

compatible = "marvell,kirkwood-thermal"; ?

> +               reg = <0x10078 0x4>;
> +       };
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index e1cb6bd..3bba13f 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -55,3 +55,10 @@ config EXYNOS_THERMAL
>         help
>           If you say yes here you get support for TMU (Thermal Managment
>           Unit) on SAMSUNG EXYNOS series of SoC.
> +
> +config ORION_THERMAL
> +       tristate "Temperature sensor on Marvel Orion SoCs"

Marvel -> Marvell

> +       depends on PLAT_ORION && THERMAL
> +       help
> +         Support for the Orion thermal sensor driver into the Linux thermal
> +         framework. This currently supports only 88F6282 and 88F6283.
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 885550d..2fc64aa 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -6,4 +6,5 @@ obj-$(CONFIG_THERMAL)           += thermal_sys.o
>  obj-$(CONFIG_CPU_THERMAL)              += cpu_cooling.o
>  obj-$(CONFIG_SPEAR_THERMAL)            += spear_thermal.o
>  obj-$(CONFIG_RCAR_THERMAL)     += rcar_thermal.o
> +obj-$(CONFIG_ORION_THERMAL)            += orion_thermal.o
>  obj-$(CONFIG_EXYNOS_THERMAL)           += exynos_thermal.o
> diff --git a/drivers/thermal/orion_thermal.c b/drivers/thermal/orion_thermal.c
> new file mode 100644
> index 0000000..e8a2a68
> --- /dev/null
> +++ b/drivers/thermal/orion_thermal.c
> @@ -0,0 +1,133 @@
> +/*
> + * Orion thermal sensor driver
> + *
> + * Copyright (C) 2012 Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/of.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/thermal.h>
> +
> +#define THERMAL_VALID_OFFSET   9
> +#define THERMAL_VALID_MASK     0x1
> +#define THERMAL_TEMP_OFFSET    10
> +#define THERMAL_TEMP_MASK      0x1FF
> +
> +/* Orion Thermal Sensor Dev Structure */
> +struct orion_thermal_dev {
> +       void __iomem *base_addr;
> +};
> +
> +static int orion_get_temp(struct thermal_zone_device *thermal,
> +                         unsigned long *temp)
> +{
> +       unsigned long reg;
> +       struct orion_thermal_dev *thermal_dev = thermal->devdata;
> +
> +       reg = readl_relaxed(thermal_dev->base_addr);
> +
> +       /* Valid check */
> +       if (!(reg >> THERMAL_VALID_OFFSET) & THERMAL_VALID_MASK) {
> +               dev_info(&thermal->device,
> +                        "Temperature sensor reading not valid\n");
> +               return -EIO;
> +       }
> +
> +       reg = (reg >> THERMAL_TEMP_OFFSET) & THERMAL_TEMP_MASK;
> +       /* Calculate temperature. See Table 814 in 8262 hardware manual. */
> +       *temp = ((322UL - reg) * 10000UL * 1000UL) / 13625UL;
> +
> +       return 0;
> +}
> +
> +static struct thermal_zone_device_ops ops = {
> +       .get_temp = orion_get_temp,
> +};
> +
> +static int orion_thermal_probe(struct platform_device *pdev)
> +{
> +       struct thermal_zone_device *thermal = NULL;
> +       struct orion_thermal_dev *thermal_dev;
> +       struct resource *res;
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       if (!res) {
> +               dev_err(&pdev->dev, "Failed to get platform resource\n");
> +               return -ENODEV;
> +       }
> +
> +       thermal_dev = devm_kzalloc(&pdev->dev, sizeof(*thermal_dev),
> +                                  GFP_KERNEL);
> +       if (!thermal_dev) {
> +               dev_err(&pdev->dev, "kzalloc fail\n");
> +               return -ENOMEM;
> +       }
> +
> +       thermal_dev->base_addr = devm_ioremap(&pdev->dev, res->start,
> +                                             resource_size(res));
> +       if (!thermal_dev->base_addr) {
> +               dev_err(&pdev->dev, "Failed to ioremap memory\n");
> +               return -ENOMEM;
> +       }
> +
> +       thermal = thermal_zone_device_register("orion_thermal", 0, 0,
> +                                  thermal_dev, &ops, 0, 0);
> +       if (IS_ERR(thermal)) {
> +               dev_err(&pdev->dev,
> +                       "Failed to register thermal zone device\n");
> +               return  PTR_ERR(thermal);
> +       }
> +
> +       platform_set_drvdata(pdev, thermal);
> +
> +       dev_info(&thermal->device,
> +                KBUILD_MODNAME ": Thermal sensor registered\n");
> +
> +       return 0;
> +}
> +
> +static int orion_thermal_exit(struct platform_device *pdev)
> +{
> +       struct thermal_zone_device *orion_thermal = platform_get_drvdata(pdev);
> +
> +       thermal_zone_device_unregister(orion_thermal);
> +       platform_set_drvdata(pdev, NULL);
> +
> +       return 0;
> +}
> +
> +static const struct of_device_id orion_thermal_id_table[] = {
> +       { .compatible = "marvell,kirkwood-thermal" },
> +       {}
> +};
> +MODULE_DEVICE_TABLE(of, orion_thermal_id_table);
> +
> +static struct platform_driver orion_thermal_driver = {
> +       .probe = orion_thermal_probe,
> +       .remove = orion_thermal_exit,
> +       .driver = {
> +               .name = "orion_thermal",
> +               .owner = THIS_MODULE,
> +               .of_match_table = of_match_ptr(orion_thermal_id_table),
> +       },
> +};
> +
> +module_platform_driver(orion_thermal_driver);
> +
> +MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu at nigauri.org>");
> +MODULE_DESCRIPTION("orion thermal driver");
> +MODULE_LICENSE("GPL");
> --
> 1.7.10.4
>

Tested-by: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>

Best regard,
  Nobuhiro

-- 
Nobuhiro Iwamatsu
   iwamatsu at {nigauri.org / debian.org}
   GPG ID: 40AD1FA6



More information about the linux-arm-kernel mailing list