[PATCH 6/7] ARM: mackerel: support booting with or without DT

[Guennadi Liakhovetski]

This patch adds dynamic switching to booting either with or without DT.
So far only a part of the board initialisation can be done via DT. Devices,
that still need platform data are kept that way. Devices, that can be
initialised from DT will not be supplied from the platform data, if a DT
image is detected.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski at gmx.de>
---
 arch/arm/mach-shmobile/board-mackerel.c |   84 ++++++++++++++++++++++++-------
 1 files changed, 66 insertions(+), 18 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 39b8f2e..a6358c9 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1326,7 +1326,6 @@ static struct platform_device mackerel_camera = {
 
 static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
-	&smc911x_device,
 	&lcdc_device,
 	&usbhs0_device,
 	&usbhs1_device,
@@ -1335,17 +1334,21 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&fsi_ak4643_device,
 	&fsi_hdmi_device,
 	&nand_flash_device,
+	&ceu_device,
+	&mackerel_camera,
+	&hdmi_device,
+	&hdmi_lcdc_device,
+	&meram_device,
+};
+
+static struct platform_device *mackerel_devices_dt[] __initdata = {
+	&smc911x_device,
 	&sdhi0_device,
 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
 	&sdhi1_device,
 #endif
 	&sdhi2_device,
 	&sh_mmcif_device,
-	&ceu_device,
-	&mackerel_camera,
-	&hdmi_device,
-	&hdmi_lcdc_device,
-	&meram_device,
 };
 
 /* Keypad Initialization */
@@ -1404,6 +1407,24 @@ static struct i2c_board_info i2c1_devices[] = {
 	},
 };
 
+static int mackerel_i2c_bus_notify(struct notifier_block *nb,
+				   unsigned long action, void *data)
+{
+	struct device *dev = data;
+
+	if (action != BUS_NOTIFY_ADD_DEVICE ||
+	    strcmp(dev_name(dev->parent), "fff20000.i2c"))
+		return NOTIFY_DONE;
+
+	i2c_new_device(to_i2c_adapter(dev), &i2c0_devices[1]);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block mackerel_i2c_notifier = {
+	.notifier_call = mackerel_i2c_bus_notify,
+};
+
 #define GPIO_PORT9CR	IOMEM(0xE6051009)
 #define GPIO_PORT10CR	IOMEM(0xE605100A)
 #define GPIO_PORT167CR	IOMEM(0xE60520A7)
@@ -1420,22 +1441,26 @@ static void __init mackerel_init(void)
 		{ "A3SP", &usbhs0_device, },
 		{ "A3SP", &usbhs1_device, },
 		{ "A3SP", &nand_flash_device, },
+		{ "A4R", &ceu_device, },
+	};
+	struct pm_domain_device domain_devices_dt[] = {
 		{ "A3SP", &sh_mmcif_device, },
 		{ "A3SP", &sdhi0_device, },
 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
 		{ "A3SP", &sdhi1_device, },
 #endif
 		{ "A3SP", &sdhi2_device, },
-		{ "A4R", &ceu_device, },
 	};
 	u32 srcr4;
 	struct clk *clk;
 
-	regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
-				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
-	regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
-				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-	regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+	if (!of_have_populated_dt()) {
+		regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
+					     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
+		regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
+					     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+		regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+	}
 
 	/* External clock source */
 	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
@@ -1633,22 +1658,35 @@ static void __init mackerel_init(void)
 	udelay(50);
 	__raw_writel(srcr4 & ~(1 << 13), SRCR4);
 
-	i2c_register_board_info(0, i2c0_devices,
-				ARRAY_SIZE(i2c0_devices));
-	i2c_register_board_info(1, i2c1_devices,
-				ARRAY_SIZE(i2c1_devices));
+	if (!of_have_populated_dt()) {
+		i2c_register_board_info(0, i2c0_devices,
+					ARRAY_SIZE(i2c0_devices));
+		i2c_register_board_info(1, i2c1_devices,
+					ARRAY_SIZE(i2c1_devices));
+	} else {
+		bus_register_notifier(&i2c_bus_type,
+				      &mackerel_i2c_notifier);
+	}
 
 	sh7372_add_standard_devices();
 
 	platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
+	if (!of_have_populated_dt())
+		platform_add_devices(mackerel_devices_dt,
+				     ARRAY_SIZE(mackerel_devices_dt));
 
 	rmobile_add_devices_to_domains(domain_devices,
 				       ARRAY_SIZE(domain_devices));
+	if (!of_have_populated_dt())
+		rmobile_add_devices_to_domains(domain_devices_dt,
+					       ARRAY_SIZE(domain_devices_dt));
 
 	hdmi_init_pm_clock();
 	sh7372_pm_init();
 	pm_clk_add(&fsi_device.dev, "spu2");
 	pm_clk_add(&hdmi_lcdc_device.dev, "hdmi");
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char *mackerel_boards_compat_dt[] __initdata = {
@@ -1659,10 +1697,20 @@ static const char *mackerel_boards_compat_dt[] __initdata = {
 DT_MACHINE_START(MACKEREL_DT, "mackerel")
 	.map_io		= sh7372_map_io,
 	.init_early	= sh7372_add_early_devices,
-	.init_irq	= sh7372_init_irq,
+	.init_irq	= sh7372_init_irq_of,
+	.handle_irq	= shmobile_handle_irq_intc,
+	.init_machine	= mackerel_init,
+	.init_late	= sh7372_pm_init_late,
+	.timer		= &shmobile_timer,
+	.dt_compat	= mackerel_boards_compat_dt,
+MACHINE_END
+
+MACHINE_START(MACKEREL, "mackerel")
+	.map_io		= sh7372_map_io,
+	.init_early	= sh7372_add_early_devices,
+	.init_irq	= sh7372_init_irq_of,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= mackerel_init,
 	.init_late	= sh7372_pm_init_late,
 	.timer		= &shmobile_timer,
-	.dt_compat  = mackerel_boards_compat_dt,
 MACHINE_END
-- 
1.7.2.5