[PATCH 05/10] ARM: OMAP2+: PM/powerdomain: move omap_set_pwrdm_state() to powerdomain code
Jean Pihet
jean.pihet at newoldbits.com
Wed Dec 12 05:31:35 EST 2012
Hi Paul,
-resending in plain text only, sorry about that-
On Sun, Dec 9, 2012 at 2:23 AM, Paul Walmsley <paul at pwsan.com> wrote:
>
> Move omap_set_pwrdm_state() from the PM code to the powerdomain code,
> and refactor it to split it up into several functions. A subsequent patch
> will rename it to conform with the existing powerdomain function names.
Glad to see this rather cryptic function getting a rewrite. It had
never been clear what the function is doing so I think it owes some
more comments.
More comments below.
>
>
> Signed-off-by: Paul Walmsley <paul at pwsan.com>
> Cc: Jean Pihet <jean.pihet at newoldbits.com>
> Cc: Kevin Hilman <khilman at deeprootsystems.com>
> ---
> arch/arm/mach-omap2/pm.c | 61 --------------------
> arch/arm/mach-omap2/pm.h | 1
> arch/arm/mach-omap2/powerdomain.c | 112 +++++++++++++++++++++++++++----------
> arch/arm/mach-omap2/powerdomain.h | 3 +
> 4 files changed, 85 insertions(+), 92 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
> index cc8ed0f..2e2a897 100644
> --- a/arch/arm/mach-omap2/pm.c
> +++ b/arch/arm/mach-omap2/pm.c
> @@ -76,10 +76,6 @@ static void __init omap2_init_processor_devices(void)
> }
> }
>
> -/* Types of sleep_switch used in omap_set_pwrdm_state */
> -#define FORCEWAKEUP_SWITCH 0
> -#define LOWPOWERSTATE_SWITCH 1
> -
> int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused)
> {
> if ((clkdm->flags & CLKDM_CAN_ENABLE_AUTO) &&
> @@ -92,63 +88,6 @@ int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused)
> }
>
> /*
> - * This sets pwrdm state (other than mpu & core. Currently only ON &
> - * RET are supported.
> - */
> -int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 pwrst)
> -{
> - u8 curr_pwrst, next_pwrst;
> - int sleep_switch = -1, ret = 0, hwsup = 0;
> -
> - if (!pwrdm || IS_ERR(pwrdm))
> - return -EINVAL;
> -
> - while (!(pwrdm->pwrsts & (1 << pwrst))) {
> - if (pwrst == PWRDM_POWER_OFF)
> - return ret;
> - pwrst--;
> - }
> -
> - next_pwrst = pwrdm_read_next_pwrst(pwrdm);
> - if (next_pwrst == pwrst)
> - return ret;
> -
> - curr_pwrst = pwrdm_read_pwrst(pwrdm);
> - if (curr_pwrst < PWRDM_POWER_ON) {
> - if ((curr_pwrst > pwrst) &&
> - (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) {
> - sleep_switch = LOWPOWERSTATE_SWITCH;
> - } else {
> - hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]);
> - clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
> - sleep_switch = FORCEWAKEUP_SWITCH;
> - }
> - }
> -
> - ret = pwrdm_set_next_pwrst(pwrdm, pwrst);
> - if (ret)
> - pr_err("%s: unable to set power state of powerdomain: %s\n",
> - __func__, pwrdm->name);
> -
> - switch (sleep_switch) {
> - case FORCEWAKEUP_SWITCH:
> - if (hwsup)
> - clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
> - else
> - clkdm_sleep(pwrdm->pwrdm_clkdms[0]);
> - break;
> - case LOWPOWERSTATE_SWITCH:
> - pwrdm_set_lowpwrstchange(pwrdm);
> - pwrdm_state_switch(pwrdm);
> - break;
> - }
> -
> - return ret;
> -}
> -
> -
> -
> -/*
> * This API is to be called during init to set the various voltage
> * domains to the voltage as per the opp table. Typically we boot up
> * at the nominal voltage. So this function finds out the rate of
> diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
> index 686137d..707e9cb 100644
> --- a/arch/arm/mach-omap2/pm.h
> +++ b/arch/arm/mach-omap2/pm.h
> @@ -33,7 +33,6 @@ static inline int omap4_idle_init(void)
> extern void *omap3_secure_ram_storage;
> extern void omap3_pm_off_mode_enable(int);
> extern void omap_sram_idle(void);
> -extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
> extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused);
> extern int (*omap_pm_suspend)(void);
>
> diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
> index 97b3881..05f00660 100644
> --- a/arch/arm/mach-omap2/powerdomain.c
> +++ b/arch/arm/mach-omap2/powerdomain.c
> @@ -921,35 +921,6 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm)
> return (pwrdm && pwrdm->flags & PWRDM_HAS_HDWR_SAR) ? 1 : 0;
> }
>
> -/**
> - * pwrdm_set_lowpwrstchange - Request a low power state change
> - * @pwrdm: struct powerdomain *
> - *
> - * Allows a powerdomain to transtion to a lower power sleep state
> - * from an existing sleep state without waking up the powerdomain.
> - * Returns -EINVAL if the powerdomain pointer is null or if the
> - * powerdomain does not support LOWPOWERSTATECHANGE, or returns 0
> - * upon success.
> - */
Can this kerneldoc be reused in the new code?
Could you add some more documentation here?
What is the goal of the function, what does it return etc. ?
>
> +
> +static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm,
> + u8 pwrst, bool *hwsup)
>
> +{
> + u8 curr_pwrst, sleep_switch;
> +
> + curr_pwrst = pwrdm_read_pwrst(pwrdm);
> + if (curr_pwrst < PWRDM_POWER_ON) {
> + if (curr_pwrst > pwrst &&
> + pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE &&
> + arch_pwrdm->pwrdm_set_lowpwrstchange) {
> + sleep_switch = LOWPOWERSTATE_SWITCH;
> + } else {
> + *hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]);
> + clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
> + sleep_switch = FORCEWAKEUP_SWITCH;
> + }
> + } else {
> + sleep_switch = ALREADYACTIVE_SWITCH;
> + }
> +
> + return sleep_switch;
> +}
> +
Same here
>
> +static void _pwrdm_restore_clkdm_state(struct powerdomain *pwrdm,
> + u8 sleep_switch, bool hwsup)
> +{
> + switch (sleep_switch) {
> + case FORCEWAKEUP_SWITCH:
> + if (hwsup)
> + clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
> + else
> + clkdm_sleep(pwrdm->pwrdm_clkdms[0]);
> + break;
> + case LOWPOWERSTATE_SWITCH:
> + if (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE &&
> + arch_pwrdm->pwrdm_set_lowpwrstchange)
> + arch_pwrdm->pwrdm_set_lowpwrstchange(pwrdm);
> + pwrdm_state_switch(pwrdm);
> + break;
> + }
> +}
> +
> +/*
> + * This sets pwrdm state (other than mpu & core. Currently only ON &
> + * RET are supported.
> + */
Same here.
Is this one correct?
Regards,
Jean
+int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst)
+{
+ u8 next_pwrst, sleep_switch;
+ int ret = 0;
+ bool hwsup = false;
+
+ if (!pwrdm || IS_ERR(pwrdm))
+ return -EINVAL;
+
+ while (!(pwrdm->pwrsts & (1 << pwrst))) {
+ if (pwrst == PWRDM_POWER_OFF)
+ return ret;
+ pwrst--;
+ }
+
+ next_pwrst = pwrdm_read_next_pwrst(pwrdm);
+ if (next_pwrst == pwrst)
+ return ret;
+
+ sleep_switch = _pwrdm_save_clkdm_state_and_
>
> activate(pwrdm, pwrst,
> + &hwsup);
> +
> + ret = pwrdm_set_next_pwrst(pwrdm, pwrst);
> + if (ret)
> + pr_err("%s: unable to set power state of powerdomain: %s\n",
> + __func__, pwrdm->name);
> +
> + _pwrdm_restore_clkdm_state(pwrdm, sleep_switch, hwsup);
> +
> + return ret;
> +}
> +
> /**
> * pwrdm_get_context_loss_count - get powerdomain's context loss count
> * @pwrdm: struct powerdomain * to wait for
> diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
> index 7c1534b..1edb3b7 100644
> --- a/arch/arm/mach-omap2/powerdomain.h
> +++ b/arch/arm/mach-omap2/powerdomain.h
> @@ -228,10 +228,11 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
> int pwrdm_state_switch(struct powerdomain *pwrdm);
> int pwrdm_pre_transition(struct powerdomain *pwrdm);
> int pwrdm_post_transition(struct powerdomain *pwrdm);
> -int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
> int pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
> bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
>
> +extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 state);
> +
> extern void omap242x_powerdomains_init(void);
> extern void omap243x_powerdomains_init(void);
> extern void omap3xxx_powerdomains_init(void);
More information about the linux-arm-kernel
mailing list