[RESEND PATCH 1/5] cpufreq: Give driver used for dbx500 family a more generic name
Ulf Hansson
ulf.hansson at stericsson.com
Mon Dec 10 10:25:38 EST 2012
From: Lee Jones <lee.jones at linaro.org>
This driver doesn't only handle cpufreq functionality for the
db8500 anymore. There are new variants which rely on it too.
Let's make the name a bit more generic.
Signed-off-by: Lee Jones <lee.jones at linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson at linaro.org>
---
drivers/cpufreq/Makefile | 2 +-
drivers/cpufreq/db8500-cpufreq.c | 179 --------------------------------------
drivers/cpufreq/dbx500-cpufreq.c | 179 ++++++++++++++++++++++++++++++++++++++
3 files changed, 180 insertions(+), 180 deletions(-)
delete mode 100644 drivers/cpufreq/db8500-cpufreq.c
create mode 100644 drivers/cpufreq/dbx500-cpufreq.c
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 1bc90e1..675559f 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -41,7 +41,7 @@ obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o
##################################################################################
# ARM SoC drivers
-obj-$(CONFIG_UX500_SOC_DB8500) += db8500-cpufreq.o
+obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c
deleted file mode 100644
index 4f154bc..0000000
--- a/drivers/cpufreq/db8500-cpufreq.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- * Author: Sundar Iyer <sundar.iyer at stericsson.com>
- * Author: Martin Persson <martin.persson at stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg at stericsson.com>
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <mach/id.h>
-
-static struct cpufreq_frequency_table *freq_table;
-static struct clk *armss_clk;
-
-static struct freq_attr *db8500_cpufreq_attr[] = {
- &cpufreq_freq_attr_scaling_available_freqs,
- NULL,
-};
-
-static int db8500_cpufreq_verify_speed(struct cpufreq_policy *policy)
-{
- return cpufreq_frequency_table_verify(policy, freq_table);
-}
-
-static int db8500_cpufreq_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- struct cpufreq_freqs freqs;
- unsigned int idx;
-
- /* scale the target frequency to one of the extremes supported */
- if (target_freq < policy->cpuinfo.min_freq)
- target_freq = policy->cpuinfo.min_freq;
- if (target_freq > policy->cpuinfo.max_freq)
- target_freq = policy->cpuinfo.max_freq;
-
- /* Lookup the next frequency */
- if (cpufreq_frequency_table_target
- (policy, freq_table, target_freq, relation, &idx)) {
- return -EINVAL;
- }
-
- freqs.old = policy->cur;
- freqs.new = freq_table[idx].frequency;
-
- if (freqs.old == freqs.new)
- return 0;
-
- /* pre-change notification */
- for_each_cpu(freqs.cpu, policy->cpus)
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
- /* update armss clk frequency */
- if (clk_set_rate(armss_clk, freq_table[idx].frequency * 1000)) {
- pr_err("db8500-cpufreq: Failed to update armss clk\n");
- return -EINVAL;
- }
-
- /* post change notification */
- for_each_cpu(freqs.cpu, policy->cpus)
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
- return 0;
-}
-
-static unsigned int db8500_cpufreq_getspeed(unsigned int cpu)
-{
- int i = 0;
- unsigned long freq = clk_get_rate(armss_clk) / 1000;
-
- while (freq_table[i].frequency != CPUFREQ_TABLE_END) {
- if (freq <= freq_table[i].frequency)
- return freq_table[i].frequency;
- i++;
- }
-
- /* We could not find a corresponding frequency. */
- pr_err("db8500-cpufreq: Failed to find cpufreq speed\n");
- return 0;
-}
-
-static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy)
-{
- int i = 0;
- int res;
-
- armss_clk = clk_get(NULL, "armss");
- if (IS_ERR(armss_clk)) {
- pr_err("db8500-cpufreq : Failed to get armss clk\n");
- return PTR_ERR(armss_clk);
- }
-
- pr_info("db8500-cpufreq : Available frequencies:\n");
- while (freq_table[i].frequency != CPUFREQ_TABLE_END) {
- pr_info(" %d Mhz\n", freq_table[i].frequency/1000);
- i++;
- }
-
- /* get policy fields based on the table */
- res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
- if (!res)
- cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
- else {
- pr_err("db8500-cpufreq : Failed to read policy table\n");
- clk_put(armss_clk);
- return res;
- }
-
- policy->min = policy->cpuinfo.min_freq;
- policy->max = policy->cpuinfo.max_freq;
- policy->cur = db8500_cpufreq_getspeed(policy->cpu);
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-
- /*
- * FIXME : Need to take time measurement across the target()
- * function with no/some/all drivers in the notification
- * list.
- */
- policy->cpuinfo.transition_latency = 20 * 1000; /* in ns */
-
- /* policy sharing between dual CPUs */
- cpumask_copy(policy->cpus, cpu_present_mask);
-
- policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
-
- return 0;
-}
-
-static struct cpufreq_driver db8500_cpufreq_driver = {
- .flags = CPUFREQ_STICKY,
- .verify = db8500_cpufreq_verify_speed,
- .target = db8500_cpufreq_target,
- .get = db8500_cpufreq_getspeed,
- .init = db8500_cpufreq_init,
- .name = "DB8500",
- .attr = db8500_cpufreq_attr,
-};
-
-static int db8500_cpufreq_probe(struct platform_device *pdev)
-{
- freq_table = dev_get_platdata(&pdev->dev);
-
- if (!freq_table) {
- pr_err("db8500-cpufreq: Failed to fetch cpufreq table\n");
- return -ENODEV;
- }
-
- return cpufreq_register_driver(&db8500_cpufreq_driver);
-}
-
-static struct platform_driver db8500_cpufreq_plat_driver = {
- .driver = {
- .name = "cpufreq-u8500",
- .owner = THIS_MODULE,
- },
- .probe = db8500_cpufreq_probe,
-};
-
-static int __init db8500_cpufreq_register(void)
-{
- if (!cpu_is_u8500_family())
- return -ENODEV;
-
- pr_info("cpufreq for DB8500 started\n");
- return platform_driver_register(&db8500_cpufreq_plat_driver);
-}
-device_initcall(db8500_cpufreq_register);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("cpufreq driver for DB8500");
diff --git a/drivers/cpufreq/dbx500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c
new file mode 100644
index 0000000..0a411b5
--- /dev/null
+++ b/drivers/cpufreq/dbx500-cpufreq.c
@@ -0,0 +1,179 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Sundar Iyer <sundar.iyer at stericsson.com>
+ * Author: Martin Persson <martin.persson at stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg at stericsson.com>
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <mach/id.h>
+
+static struct cpufreq_frequency_table *freq_table;
+static struct clk *armss_clk;
+
+static struct freq_attr *dbx500_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static int dbx500_cpufreq_verify_speed(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, freq_table);
+}
+
+static int dbx500_cpufreq_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct cpufreq_freqs freqs;
+ unsigned int idx;
+
+ /* scale the target frequency to one of the extremes supported */
+ if (target_freq < policy->cpuinfo.min_freq)
+ target_freq = policy->cpuinfo.min_freq;
+ if (target_freq > policy->cpuinfo.max_freq)
+ target_freq = policy->cpuinfo.max_freq;
+
+ /* Lookup the next frequency */
+ if (cpufreq_frequency_table_target
+ (policy, freq_table, target_freq, relation, &idx)) {
+ return -EINVAL;
+ }
+
+ freqs.old = policy->cur;
+ freqs.new = freq_table[idx].frequency;
+
+ if (freqs.old == freqs.new)
+ return 0;
+
+ /* pre-change notification */
+ for_each_cpu(freqs.cpu, policy->cpus)
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ /* update armss clk frequency */
+ if (clk_set_rate(armss_clk, freq_table[idx].frequency * 1000)) {
+ pr_err("dbx500-cpufreq: Failed to update armss clk\n");
+ return -EINVAL;
+ }
+
+ /* post change notification */
+ for_each_cpu(freqs.cpu, policy->cpus)
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return 0;
+}
+
+static unsigned int dbx500_cpufreq_getspeed(unsigned int cpu)
+{
+ int i = 0;
+ unsigned long freq = clk_get_rate(armss_clk) / 1000;
+
+ while (freq_table[i].frequency != CPUFREQ_TABLE_END) {
+ if (freq <= freq_table[i].frequency)
+ return freq_table[i].frequency;
+ i++;
+ }
+
+ /* We could not find a corresponding frequency. */
+ pr_err("dbx500-cpufreq: Failed to find cpufreq speed\n");
+ return 0;
+}
+
+static int __cpuinit dbx500_cpufreq_init(struct cpufreq_policy *policy)
+{
+ int i = 0;
+ int res;
+
+ armss_clk = clk_get(NULL, "armss");
+ if (IS_ERR(armss_clk)) {
+ pr_err("dbx500-cpufreq : Failed to get armss clk\n");
+ return PTR_ERR(armss_clk);
+ }
+
+ pr_info("dbx500-cpufreq : Available frequencies:\n");
+ while (freq_table[i].frequency != CPUFREQ_TABLE_END) {
+ pr_info(" %d Mhz\n", freq_table[i].frequency/1000);
+ i++;
+ }
+
+ /* get policy fields based on the table */
+ res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+ if (!res)
+ cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
+ else {
+ pr_err("dbx500-cpufreq : Failed to read policy table\n");
+ clk_put(armss_clk);
+ return res;
+ }
+
+ policy->min = policy->cpuinfo.min_freq;
+ policy->max = policy->cpuinfo.max_freq;
+ policy->cur = dbx500_cpufreq_getspeed(policy->cpu);
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+ /*
+ * FIXME : Need to take time measurement across the target()
+ * function with no/some/all drivers in the notification
+ * list.
+ */
+ policy->cpuinfo.transition_latency = 20 * 1000; /* in ns */
+
+ /* policy sharing between dual CPUs */
+ cpumask_copy(policy->cpus, cpu_present_mask);
+
+ policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
+
+ return 0;
+}
+
+static struct cpufreq_driver dbx500_cpufreq_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = dbx500_cpufreq_verify_speed,
+ .target = dbx500_cpufreq_target,
+ .get = dbx500_cpufreq_getspeed,
+ .init = dbx500_cpufreq_init,
+ .name = "DBX500",
+ .attr = dbx500_cpufreq_attr,
+};
+
+static int dbx500_cpufreq_probe(struct platform_device *pdev)
+{
+ freq_table = dev_get_platdata(&pdev->dev);
+
+ if (!freq_table) {
+ pr_err("dbx500-cpufreq: Failed to fetch cpufreq table\n");
+ return -ENODEV;
+ }
+
+ return cpufreq_register_driver(&dbx500_cpufreq_driver);
+}
+
+static struct platform_driver dbx500_cpufreq_plat_driver = {
+ .driver = {
+ .name = "cpufreq-ux500",
+ .owner = THIS_MODULE,
+ },
+ .probe = dbx500_cpufreq_probe,
+};
+
+static int __init dbx500_cpufreq_register(void)
+{
+ if (!cpu_is_u8500_family())
+ return -ENODEV;
+
+ pr_info("cpufreq for DBX500 started\n");
+ return platform_driver_register(&dbx500_cpufreq_plat_driver);
+}
+device_initcall(dbx500_cpufreq_register);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("cpufreq driver for DBX500");
--
1.7.10
More information about the linux-arm-kernel
mailing list